Liebes Forum!
Wir haben immer wieder Probleme mit unseren PVE's und Multipath. Wenn wir eine PVE neu starten, läuft zunächst kein Multipath.
$ ssh root@xxxxx
Die Festplatten der VMs liegen auf einer Nexsan.
Weiters kommt es auch immer wieder dazu, dass eine VM read-only gemountet wird (ext4 FS mit Option errors=remount-ro), es also zu FS-Errors kommt.
Alles, was wir bisher dazu unternommen haben (https://pve.proxmox.com/wiki/ISCSI_Multipath einarbeiten), hat keine Veränderung gebracht. Habt ihr irgendwelche Ideen?
LG
Zelko
--
IT Systembetreuung
Diakonie Flüchtlingsdienst gem. GmbH
Wir haben immer wieder Probleme mit unseren PVE's und Multipath. Wenn wir eine PVE neu starten, läuft zunächst kein Multipath.
$ ssh root@xxxxx
- $ qm list
Code:VMID NAME STATUS MEM(MB) BOOTDISK(GB) PID 10110 xenokrates stopped 4096 64.00 0 32100 Win7Test stopped 1024 32.00 0 32101 Win7Test101 stopped 1024 32.00 0 32102 Win7Test102 stopped 1024 32.00 0 32103 Win7Test103 stopped 1024 32.00 0 32106 Win7Test6 stopped 2048 32.00 0
- $ multipath -ll (FAILED mit return code 1)
Jul 12 20:41:05 | error parsing config file - $ multipath -v3 (FAILED mit return code 1)
Jul 12 20:41:07 | error parsing config file - $ qm start 10110
Code:Found duplicate PV ouSh1sGmOSUnRsSOjS6crUQbKMFTq9Yw: using /dev/sdc not /dev/sdb Found duplicate PV ouSh1sGmOSUnRsSOjS6crUQbKMFTq9Yw: using /dev/sdd not /dev/sdc Found duplicate PV k8qlbr8NwqZciVgOEU2NRyKIqeD0FViz: using /dev/sdf not /dev/sde Found duplicate PV k8qlbr8NwqZciVgOEU2NRyKIqeD0FViz: using /dev/sdg not /dev/sdf Found duplicate PV ouSh1sGmOSUnRsSOjS6crUQbKMFTq9Yw: using /dev/sdc not /dev/sdb Found duplicate PV ouSh1sGmOSUnRsSOjS6crUQbKMFTq9Yw: using /dev/sdd not /dev/sdc Found duplicate PV k8qlbr8NwqZciVgOEU2NRyKIqeD0FViz: using /dev/sdf not /dev/sde Found duplicate PV k8qlbr8NwqZciVgOEU2NRyKIqeD0FViz: using /dev/sdg not /dev/sdf Running as unit 10110.scope.
- $ qm shutdown 10110
- $ for i in $(qm list | awk '{print $1}'); do echo "shutdown VM $i"; qm shutdown $i; done
- $ for i in $(qm list | awk '{print $1}'); do echo "disable HA for VM $i"; ha-manager disable $i; done
- $ b /etc/multipath.conf
- $ cp /etc/multipath.conf{.puppet,}
- $ systemctl restart multipath-tools.service
- $ multipath -ll
Code:roadrunner (36000402003d854e77b58288400000000) dm-7 NEXSAN,NXS-B01-000 size=4.9T features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=1 status=active |- 7:0:0:0 sdb 8:16 active ready running |- 8:0:0:0 sdc 8:32 active ready running `- 9:0:0:0 sdd 8:48 active ready running coyote (36000402003d854e77b6a6bce00000000) dm-8 NEXSAN,NXS-B01-000 size=14T features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=1 status=active |- 7:0:0:1 sde 8:64 active ready running |- 8:0:0:1 sdf 8:80 active ready running `- 9:0:0:1 sdg 8:96 active ready running
- $ qm start 10110
Code:Running as unit 10110.scope.
Die Festplatten der VMs liegen auf einer Nexsan.
Weiters kommt es auch immer wieder dazu, dass eine VM read-only gemountet wird (ext4 FS mit Option errors=remount-ro), es also zu FS-Errors kommt.
Alles, was wir bisher dazu unternommen haben (https://pve.proxmox.com/wiki/ISCSI_Multipath einarbeiten), hat keine Veränderung gebracht. Habt ihr irgendwelche Ideen?
LG
Zelko
--
IT Systembetreuung
Diakonie Flüchtlingsdienst gem. GmbH