Problem during Windows 7 installation - error 0X80070570 "uncompress..."

[stephchezsasic]

Hi,

I've just install Proxmox release 3.3 and there's a stuck during Windows seven Pro 64 installation.
Everything goes as well as possible except during uncompress step. At about 4%, an error occured "error 0X80070570" - the system couldn't not extract data as if the ISO file was corrupted.

I've tested everything possible:
- memory : change the ram component and check again: ram is clean
- ISO file: I've tested with various ISO file and always the same problem
- Proxmox configuration: OK

I've installed my system as in the youtube proxmox video chanel:
https://www.youtube.com/watch?v=thVmhIw4-jU
My configuration is similar (except their amazing server - intel 64 dual core (just for test).

I can't find any solution. If somebody could help me, it could be so nice

Stephane - A french user

 

[tom]

did you checked the md5sum of the uploaded windows ISO image?

 

[stephchezsasic]

Hi Tom,

Thanks you for your fast reply. I've just checked the md5sum for all my ISO CD/DVD and all are OK.
- I have test Proxmox (same version) with installation of Fedora 18 on the VM and installation was successfull.
- I made a new test this morning with Proxmox (another version: 3.1) with installation of win 7 Pro 64 on the VM and installation encountered the same problem.

So it seems working with Linux (fedora in VM) but not with Windows. Nevertheless, I need to install Windows, not Linux on my VM
See below the error message (during installation) in the screenshot:



Thanks in advance.

Best regards,
Stéphane

 

[cersosimo]

Hi,
I also have the same problem.
both with windows 2012
both with windows 2012 r2
both with windows 2008 r2.



all other operating systems works perfectly
(Centos, Debian, Fedora, Windows XP, Windows 7)



This is the server machine .:



Thank
Gianfranco

 

[term]

Are you installing on a IDE drive or a virtio one?

 

[stephchezsasic]

Hi,

I've just tested with Windows XP and it's works fine.
So, as for Gianfranco, for some OS, it works (Windows XP, LInux) but on Windows 7, no.

I'm surprise that so few people have encounter that problem !... :/ Maybe it's a configuration problem but I follow all the tutos on the web.

Thank you in advance,

Stéphane

 

[cersosimo]

i Tested with Windows 2012 r2: error 0X80070570 "uncompress..."

test create disk:
IDE - up to LVM Drive - error copy file after (25%)
IDE - up to directory Drive - error copy file after (25%)
SATA/QEMU - up to directory Drive - error copy file after (3%)
SATA/RAW - up to directory Drive - error copy file after (3%)
SATA/VMWARE - up to directory Drive - error copy file after (3%)
SATA/VMWARE - LVM Drive - error copy file after (3%)
VIRTIO - uP to directory Drive - Disk not found.
VIRTIO - uP to LVM Drive - Disk not found.
SCSI - ut to directory Drive - Disk not found.
SCSI - uP to LVM Drive - Disk not found.


Fisical Server controller has the SATA AHCI BIOS emulation.
:/

Gianfranco

 

[pirateghost]

That's weird. I have no such issues with 7, 8, 8.1, 2008, 2012

 

[acidrop]

Can you try with win7 32bit?

This link suggests a bug on virtio drivers but I don't know if it's related to your problem:
https://bugzilla.redhat.com/show_bug.cgi?id=1135824

Have you updated proxmox to latest version?
What's the underlying storage type on /var/lib/vz?How it is formatted (ext3,ext4 etc)
What's the output of "pveversion -v" ?

 

[stephchezsasic]

Hi there,

So, I've tried a lot of things:
- Windows 8.1: doesn't works - it doesn't load proprely (reboot)
- Install of the latest version of proxmox: running on 3.3, I have tested on 3.1 / same problem. Upgrade for 4.0: it's not a proxmox VE upgrade (a mail gateway)
- for the storage type, I think it's ext4
- What's the output of "pveversion -v" ? the result below:
proxmox-ve-2.6.32: 3.1-114 (running kernel: 2.6.32-26-pve)
pve-manager: 3.1-21 (running version: 3.1-21/93bf03d4)
pve-kernel-2.6.32-26-pve: 2.6.32-114
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-2
pve-cluster: 3.0-8
qemu-server: 3.1-8
pve-firmware: 1.0-23
libpve-common-perl: 3.0-8
libpve-access-control: 3.0-7
libpve-storage-perl: 3.0-17
pve-libspice-server1: 0.12.4-2
vncterm: 1.1-4
vzctl: 4.0-1pve4
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-17
ksm-control-daemon: 1.1-1
glusterfs-client: 3.4.1-1

For the moment, the system woks fine with 2 or 3 VM (Windows XP) but I can't install Win7. As for user "PirateGhost", we have the same problem.

Best regards,

Stephane

 

[term]

Your pve is not the latest. Several packages are old. Can you update and try again?

 

[pirateghost]

Hi there,

So, I've tried a lot of things:
- Windows 8.1: doesn't works - it doesn't load proprely (reboot)
- Install of the latest version of proxmox: running on 3.3, I have tested on 3.1 / same problem. Upgrade for 4.0: it's not a proxmox VE upgrade (a mail gateway)
- for the storage type, I think it's ext4
- What's the output of "pveversion -v" ? the result below:
proxmox-ve-2.6.32: 3.1-114 (running kernel: 2.6.32-26-pve)
pve-manager: 3.1-21 (running version: 3.1-21/93bf03d4)
pve-kernel-2.6.32-26-pve: 2.6.32-114
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-2
pve-cluster: 3.0-8
qemu-server: 3.1-8
pve-firmware: 1.0-23
libpve-common-perl: 3.0-8
libpve-access-control: 3.0-7
libpve-storage-perl: 3.0-17
pve-libspice-server1: 0.12.4-2
vncterm: 1.1-4
vzctl: 4.0-1pve4
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-17
ksm-control-daemon: 1.1-1
glusterfs-client: 3.4.1-1

For the moment, the system woks fine with 2 or 3 VM (Windows XP) but I can't install Win7. As for user "PirateGhost", we have the same problem.

Best regards,

Stephane

I actually stated that I have zero issues installing windows. Any version of windows works here. I didn't do anything special for it to work. Standard proxmox installation, and have had working windows VMS since I started using 2.x something.

 

[cersosimo]

Windows 2012 R2 not exist 32 bit.

disk format EX3 = /dev/sde1 /VMDISK ext3 defaults 0 0


root@proxmox:~#
root@proxmox:~# pveversion -v
proxmox-ve-2.6.32: 3.2-136 (running kernel: 2.6.32-32-pve)
pve-manager: 3.3-1 (running version: 3.3-1/a06c9f73)
pve-kernel-2.6.32-32-pve: 2.6.32-136
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.10-1
pve-cluster: 3.0-15
qemu-server: 3.1-34
pve-firmware: 1.1-3
libpve-common-perl: 3.0-19
libpve-access-control: 3.0-15
libpve-storage-perl: 3.0-23
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 2.1-5
ksm-control-daemon: 1.1-1
glusterfs-client: 3.5.2-1
root@proxmox:~#

 

[k1lerbee]

same issue with windows 10 VM and latest proxmox..

tried sata HDD

 

[tom]

...
proxmox-ve-2.6.32: 3.2-136 (running kernel: 2.6.32-32-pve)
..

You run an very outdated installation (with a lot of problems and security issues), please use latest version.

 

[tom]

same issue with windows 10 VM and latest proxmox..

tried sata HDD

what is "latest" exactly, please always post the output of "pveversion -v"

 

[k1lerbee]

pff... how to copy and paste from the vnc "_shell" window???

 

[k1lerbee]

damn the proxmox web shell is pretty useless... I am using ssh instead:

proxmox-ve: 5.1-32 (running kernel: 4.13.13-2-pve)
pve-manager: 5.1-41 (running version: 5.1-41/0b958203)
pve-kernel-4.13.13-2-pve: 4.13.13-32
libpve-http-server-perl: 2.0-8
lvm2: 2.02.168-pve6
corosync: 2.4.2-pve3
libqb0: 1.0.1-1
pve-cluster: 5.0-19
qemu-server: 5.0-18
pve-firmware: 2.0-3
libpve-common-perl: 5.0-25
libpve-guest-common-perl: 2.0-14
libpve-access-control: 5.0-7
libpve-storage-perl: 5.0-17
pve-libspice-server1: 0.12.8-3
vncterm: 1.5-3
pve-docs: 5.1-12
pve-qemu-kvm: 2.9.1-5
pve-container: 2.0-18
pve-firewall: 3.0-5
pve-ha-manager: 2.0-4
ksm-control-daemon: 1.2-2
glusterfs-client: 3.8.8-1
lxc-pve: 2.1.1-2
lxcfs: 2.0.8-1
criu: 2.11.1-1~bpo90
novnc-pve: 0.6-4
smartmontools: 6.5+svn4324-1
zfsutils-linux: 0.7.3-pve1~bpo9

 

[tom]

pff... how to copy and paste from the vnc "_shell" window???

you can get the list of packages via the web gui.

or use the new xterm.js console, this supports copy and paste.

 

[k1lerbee]

See below:

proxmox-ve: 5.1-32 (running kernel: 4.13.13-2-pve)
pve-manager: 5.1-41 (running version: 5.1-41/0b958203)
pve-kernel-4.13.13-2-pve: 4.13.13-32
libpve-http-server-perl: 2.0-8
lvm2: 2.02.168-pve6
corosync: 2.4.2-pve3
libqb0: 1.0.1-1
pve-cluster: 5.0-19
qemu-server: 5.0-18
pve-firmware: 2.0-3
libpve-common-perl: 5.0-25
libpve-guest-common-perl: 2.0-14
libpve-access-control: 5.0-7
libpve-storage-perl: 5.0-17
pve-libspice-server1: 0.12.8-3
vncterm: 1.5-3
pve-docs: 5.1-12
pve-qemu-kvm: 2.9.1-5
pve-container: 2.0-18
pve-firewall: 3.0-5
pve-ha-manager: 2.0-4
ksm-control-daemon: 1.2-2
glusterfs-client: 3.8.8-1
lxc-pve: 2.1.1-2
lxcfs: 2.0.8-1
criu: 2.11.1-1~bpo90
novnc-pve: 0.6-4
smartmontools: 6.5+svn4324-1
zfsutils-linux: 0.7.3-pve1~bpo9

p.s. I checked the cheksum of the iso and I uploaded the ISO twice