Pop client settings

[lianghaibin]

I used proxmox as the mail gateway and associated with my exchange. But now when I set up the pop client, pop can only receive mail but can't send mail. How do I configure it

 

[treloskilo]

You should connect your mail client to your exchange server not proxmox.
Also you need to make a send connector from your exchange server to proxmox.

 

[lianghaibin]

I already know how to do it, but the client can't send it. Web pages are normal

 

[treloskilo]

then you should look at the log files to see what is going on

 

[lianghaibin]

The exchange server prompts that the mail is stuck in the queue and cannot be sent successfully。The STMP server address of my pop client is filled in: mail cmlabs. com. Cn port is filled in 25

 

[treloskilo]

Proxmox port for outgoing mail is 26. You need to change that in Exchange.

 

[lianghaibin]

I've set it to 26 The POP3 protocol in the client is still unavailable

 

[treloskilo]

Client is trying to connect to exchange with pop3?

 

[lianghaibin]

yes

 

[lianghaibin]

The problem has been solved！
To sum up: my environment is from Internet to firewall, then to proxmox, and then to exchange.
The desired effect is that the mobile terminal can use pop protocol. At this time, after normal settings, you need to show a 30 (non conflicting arbitrary port number) - > 25 (standard port) from the external network to the internal network on the firewall, and then set the sending server port of the mobile phone to 30

 

[treloskilo]

ok good then

 

[vicent_wu]

The problem has been solved！
To sum up: my environment is from Internet to firewall, then to proxmox, and then to exchange.
The desired effect is that the mobile terminal can use pop protocol. At this time, after normal settings, you need to show a 30 (non conflicting arbitrary port number) - > 25 (standard port) from the external network to the internal network on the firewall, and then set the sending server port of the mobile phone to 30

I have the same problem as you now, from the Internet to the firewall to proxmox to exchange2016. The problem is now that my exchange2016 is deployed in an external computer room. All clients use POP3 mode to receive and send emails. You said to use port 30. Map to port 25 of the gateway. I don’t quite understand this. Please give me some advice.