I have a Pfsense running in Tyan 52 Node, In the Tyan 52 Node, It has vmbr0 connected to the 10.1.1.0/24 network which is the WAN, and vmbr1, connected to the internal switch for 10.1.2.0/24 on the LAN
As you can see on the image, I have 2 VLAN running in the LAN, it works as intended in the same Proxmox Node which is Tyan 52, but when I try to create a VM in Tyan 51 which is another Proxmox Node and try to get IP address for the VLAN TAG 2 which is 2.0.0.0/8, it is not receiving any IP, but when I try using LAN network which is without VLAN tagging, it get the IP. Tyan 51 have the same configuration as Tyan 52, one ethernet connected to 10.1.1.0/24 and one to the switch for 10.1.2.0/24.
Example in the Problematic Tyan 51:
When I test this, I turn on the correspondence DHCP of its interface and immediately without the VLAN tag gets it's IP and with tagging it doesn't get any tag in Tyan 51.
I try to create a new Pfsense in the Tyan 51 and it does work but cant communicate to other nodes VM. SO my assumption is the VLAN only work in Tyan 52 where the Pfsense resides in.
All the network settings is identical to this picture
Goal : Pfsense resides in 1 of the Nodes and VLAN working in all Nodes of the Cluster
Can anybody help me fix this issue?
As you can see on the image, I have 2 VLAN running in the LAN, it works as intended in the same Proxmox Node which is Tyan 52, but when I try to create a VM in Tyan 51 which is another Proxmox Node and try to get IP address for the VLAN TAG 2 which is 2.0.0.0/8, it is not receiving any IP, but when I try using LAN network which is without VLAN tagging, it get the IP. Tyan 51 have the same configuration as Tyan 52, one ethernet connected to 10.1.1.0/24 and one to the switch for 10.1.2.0/24.
Example in the Problematic Tyan 51:
When I test this, I turn on the correspondence DHCP of its interface and immediately without the VLAN tag gets it's IP and with tagging it doesn't get any tag in Tyan 51.
I try to create a new Pfsense in the Tyan 51 and it does work but cant communicate to other nodes VM. SO my assumption is the VLAN only work in Tyan 52 where the Pfsense resides in.
All the network settings is identical to this picture
Goal : Pfsense resides in 1 of the Nodes and VLAN working in all Nodes of the Cluster
Can anybody help me fix this issue?