SAS Raid controller question
First of all Thanks and excuse me for my english not so good.
I'm new to proxmox VE and i haven't installed yet (i'm waitin' the new server, hope it will arrive in 10 days) but i need additional information about the sas raid controller.
the server is equipped with this:
SAS RAID PCI Card 6Gb/s. 4 Internal ports, PCI-E 2.0 x8, RAID 0/1/10/5 (LSI 9240-4i with mSAS-mSAS cable)
I found that the kernel 2.6.32 supports this controller so proxmoxVE 1.7, am i right?
If i'm wrong, can i use the driver from lsi for debian 5.0.5 (or 5.0.4) ?
The server is this: Gateway GT150 F1 equipped with:
That's all, i'm reading anything can find about p2v and proxmox so i hope to be on the right way.
Thanks again
Edit:
changed title, i've started the post for questions that i didn't post.
First of all Thanks and excuse me for my english not so good.
I'm new to proxmox VE and i haven't installed yet (i'm waitin' the new server, hope it will arrive in 10 days) but i need additional information about the sas raid controller.
the server is equipped with this:
SAS RAID PCI Card 6Gb/s. 4 Internal ports, PCI-E 2.0 x8, RAID 0/1/10/5 (LSI 9240-4i with mSAS-mSAS cable)
I found that the kernel 2.6.32 supports this controller so proxmoxVE 1.7, am i right?
If i'm wrong, can i use the driver from lsi for debian 5.0.5 (or 5.0.4) ?
The server is this: Gateway GT150 F1 equipped with:
- 2 x intel xeon E5506
- 12GB ram ECC
- lsi 9042-4i sas raid
- 4x 146GB SAS 15K rpm
That's all, i'm reading anything can find about p2v and proxmox so i hope to be on the right way.
Thanks again
Edit:
changed title, i've started the post for questions that i didn't post.
Last edited: