no pve proxmox web interface after upgrade

[grphoto]

Hello.
I make the last updates and lost the web interface.

with pveversion -v i get this:

proxmox-ve-2.6.32: not correctly installed (running kernel: 2.6.32-34-pve)
pve-manager: not correctly installed (running version: 3.3-20/d0640ef1)
pve-kernel-2.6.32-32-pve: 2.6.32-136
pve-kernel-2.6.32-33-pve: 2.6.32-138
pve-kernel-2.6.32-30-pve: 2.6.32-130
pve-kernel-2.6.32-34-pve: 2.6.32-140
pve-kernel-2.6.32-31-pve: 2.6.32-132
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: not correctly installed
pve-cluster: not correctly installed
qemu-server: not correctly installed
pve-firmware: 1.1-3
libpve-common-perl: not correctly installed
libpve-access-control: not correctly installed
libpve-storage-perl: not correctly installed
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: not correctly installed
vzquota: 3.1-2
pve-qemu-kvm: not correctly installed
ksm-control-daemon: not correctly installed
glusterfs-client: 3.5.2-1

 

[dietmar]

You should be more careful when answering questions. Seems you removed most packages during the upgrade.
Please try to repair using:

# apt-get install proxmox-ve-2.6.32

 

[grphoto]

Thank you very much for your help. much appreciate, i will try this. I just did upgrade from UPDATES tab (even i had stop first VMs) like i have done it many many times in past.

 

[dietmar]

I just did upgrade from UPDATES tab (even i had stop first VMs) like i have done it many many times in past.

Depending on installed packages, that sometimes asks question what you want to do exactly. apt-get always ask before it remove things.

 

[muzo178]

I'm having the exact same issue. I too did use the UPDATES tab, the VNC window just disappeared. Now have no access to web interface.

I can ssh in and the output of pveversion -v is pretty much the sam as the op.

proxmox-ve-2.6.32: not correctly installed (running kernel: 2.6.32-34-pve)
pve-manager: not correctly installed (running version: 3.3-20/d0640ef1)
pve-kernel-2.6.32-34-pve: 2.6.32-140
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: not correctly installed
pve-cluster: not correctly installed
qemu-server: not correctly installed
pve-firmware: 1.1-3
libpve-common-perl: not correctly installed
libpve-access-control: not correctly installed
libpve-storage-perl: not correctly installed
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: not correctly installed
vzquota: 3.1-2
pve-qemu-kvm: not correctly installed
ksm-control-daemon: not correctly installed
glusterfs-client: 3.5.2-1

When I try running apt-get install proxmox-ve-2.6.32 i get:


E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?

Please advise.

 

[dietmar]

Seem there is another dpkg process running. Use 'ps auxww' to find it, then try to kill that process.

 

[muzo178]

Below is what I did. All is fine now. I'm never updating from the web interface again

# fuser /var/lib/dpkg/lock /var/lib/apt/lists/lock
/var/lib/dpkg/lock:  728564

# fuser -k /var/lib/dpkg/lock /var/lib/apt/lists/lock
/var/lib/dpkg/lock:  728564

# apt-get install proxmox-ve-2.6.32
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.

# dpkg --configure -a
Setting up....
...

 # pveversion -v
proxmox-ve-2.6.32: 3.3-147 (running kernel: 2.6.32-34-pve)
pve-manager: 3.3-20 (running version: 3.3-20/d0640ef1)
pve-kernel-2.6.32-37-pve: 2.6.32-147
pve-kernel-2.6.32-34-pve: 2.6.32-140
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.10-2
pve-cluster: 3.0-16
qemu-server: 3.3-19
pve-firmware: 1.1-3
libpve-common-perl: 3.0-24
libpve-access-control: 3.0-16
libpve-storage-perl: 3.0-30
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: not correctly installed
vzquota: 3.1-2
pve-qemu-kvm: 2.1-12
ksm-control-daemon: not correctly installed
glusterfs-client: 3.5.2-1

 

[si458]

Hi All

im also having a simular issue with the upgrade of my PVE system?

root@proxmox5:~# apt-get install proxmox-ve-2.6.32
Reading package lists... Done
Building dependency tree
Reading state information... Done
proxmox-ve-2.6.32 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
3 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue [Y/n]? y
Setting up qemu-server (3.3-19) ...
dpkg: error processing qemu-server (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of pve-manager:
pve-manager depends on qemu-server (>= 1.1-1); however:
Package qemu-server is not configured yet.

dpkg: error processing pve-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of proxmox-ve-2.6.32:
proxmox-ve-2.6.32 depends on pve-manager; however:
Package pve-manager is not configured yet.
proxmox-ve-2.6.32 depends on qemu-server; however:
Package qemu-server is not configured yet.

dpkg: error processing proxmox-ve-2.6.32 (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
qemu-server
pve-manager
proxmox-ve-2.6.32
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@proxmox5:~#

any help would be much helpful

Simon

 

[tom]

See also the explanation and the fix:

http://forum.proxmox.com/threads/21...)-leading-to-not-correctly-installed-packages