no network interface found

[lxhcnasia]

When I install PVE, after booting into installer interface, select PVE Installer then click next , then the screen print the message " No network interface found". I have a wireless network interface card on the board.

 

[lxhcnasia]

 

[lxhcnasia]

Is anyone encountered the question? Please answer me .

 

[matrix]

What say the screen if you pressed CTRL + ALT + F2

 

[ihringerf]

any news on this issue? I have got the same problem.

 

[lowerym]

I have run into this issue before using dell 640s with qlogic controllers

was able to resolve using the following to create a dummy interface

abort to the console and run the following commands to create a "dummy" to get your through the install then you can update with the correct networking info
modprobe dummy
ip link add dummy0 type dummy
xinit

 

[ihringerf]

Thank you very much for this valuable information.
at which time should I abort to the console. after the error message seems to be too late.

 

[lowerym]

Thank you very much for this valuable information.
at which time should I abort to the console. after the error message seems to be too late.

you should be directly to the console if you click abort while on that screen

 

[ihringerf]

Thank you for helping me. I tried, but I do get an error on 'modprobe dummy' --> FATAL: Module dummy not found in directory /lib/modules/5.4.73-1-pve

 

[lowerym]

thats no good. this is the post i have used in the past that i got my information from and has worked for my. sorry i was not of more help.

https://forum.proxmox.com/threads/no-network-interfaces-found-qlogic-4xxxx.42892/

 

[ihringerf]

I apreciate your help. thank you. I might do a Buster install first as some in this thread propose - and then install Proxmox on top. Will keep you posted. Thank you anyway.