I've got a Gen2 PowerEdge 2950, 16 gigs of ram, 2 quad-core xeons. A single raid 1+0 volume for /
The install process works fine. I enter in all of my network information (the connection works fine. It's an access port to a VLan. DHCP also work fine on this port [tested with a live cd])
Upon boot up, I can't ping my gateway or any other hosts in the network as I could do from the liveCD. Nothing can ping the Proxmox box either.
ifconfig -a lists lo, eth0, eth1, vmnet, vmbr0
cat /proc/dev/net shows the same, with metrics that you'd expect to see for devices that never find their network. eth0 = gb1, eth1 = gb2 (both built in ports. I have no other NICs in this system)
I've verified all of the network settings, too, and everything appears to be fine.
Suggestions?
The install process works fine. I enter in all of my network information (the connection works fine. It's an access port to a VLan. DHCP also work fine on this port [tested with a live cd])
Upon boot up, I can't ping my gateway or any other hosts in the network as I could do from the liveCD. Nothing can ping the Proxmox box either.
ifconfig -a lists lo, eth0, eth1, vmnet, vmbr0
cat /proc/dev/net shows the same, with metrics that you'd expect to see for devices that never find their network. eth0 = gb1, eth1 = gb2 (both built in ports. I have no other NICs in this system)
I've verified all of the network settings, too, and everything appears to be fine.
Suggestions?