Hi,
I'm facing to a new problem with Proxmox on HP ProLiant BL460c G7 including HP NC553i Integrated FlexFabric Adapter, also called Emulex dual port FlexFabric 10GbE.
I've installed "proxmox-ve_2.1-f9b0f63a-26.iso" (Kernel 2.6.32-11) and the OS can't see any network card. I prevously tested XenServer 6.0 and VMware ESXi 5.0 : eveything went alright so it's not a hardware problem. I have other linux installed on those blade : they works smoothly too. The driver loaded is "be2net". I try to load the driver by myself (using modprobe), it didn't change anything.
I've found this topic : http://forum.proxmox.com/threads/5275-be2net-driver : I'm already running pve-firmware_1.0-15_all.deb, more up to date than the one recommended on the topic.
- I could upgrade the kernel maybe ? This will be a painful, I don't have network connection to download basic compilation tools...
- Install an up to date debian kernel ?
Any ideas to fix this network issue ?
Thanks
I'm facing to a new problem with Proxmox on HP ProLiant BL460c G7 including HP NC553i Integrated FlexFabric Adapter, also called Emulex dual port FlexFabric 10GbE.
I've installed "proxmox-ve_2.1-f9b0f63a-26.iso" (Kernel 2.6.32-11) and the OS can't see any network card. I prevously tested XenServer 6.0 and VMware ESXi 5.0 : eveything went alright so it's not a hardware problem. I have other linux installed on those blade : they works smoothly too. The driver loaded is "be2net". I try to load the driver by myself (using modprobe), it didn't change anything.
I've found this topic : http://forum.proxmox.com/threads/5275-be2net-driver : I'm already running pve-firmware_1.0-15_all.deb, more up to date than the one recommended on the topic.
- I could upgrade the kernel maybe ? This will be a painful, I don't have network connection to download basic compilation tools...
- Install an up to date debian kernel ?
Any ideas to fix this network issue ?
Thanks