Hello, i'm having a problem installing lastest proxmox versions on this blade, when i try to install it I get a "no hard disk found".
I have configured the disks this way
When the ISO is booting, i hangs about 3 min in this line
Then, I get this modprobe error
This is when i get the No hard Disk Error
CTRL + ALT + F2
I've tried installing also pve 4.1 and 4.0, with no luck.
I also made a firmware upgrade with the latest service pack from HP, no luck also. Also i tried to install pve on another blades from other enclosures (with the same hardware), no luck either.
I think it's related to the hpsa kernel module with p220i raid controller, i've tried to boot kernel with parameter hpsa.hpsa_allow_any=1, but i got the same error.
The strange thing is proxmox 3.4 works well (it does detect the logical volume)
Any suggestions?
HARDWARE: ProLiant BL465c Gen8
2x AMD Opteron(tm) Processor 6376 (16 Cores)
P220i raid controller (RAID 1 2x250GB SSD)
Thanks
I have configured the disks this way
When the ISO is booting, i hangs about 3 min in this line
Then, I get this modprobe error
This is when i get the No hard Disk Error
CTRL + ALT + F2
I've tried installing also pve 4.1 and 4.0, with no luck.
I also made a firmware upgrade with the latest service pack from HP, no luck also. Also i tried to install pve on another blades from other enclosures (with the same hardware), no luck either.
I think it's related to the hpsa kernel module with p220i raid controller, i've tried to boot kernel with parameter hpsa.hpsa_allow_any=1, but i got the same error.
The strange thing is proxmox 3.4 works well (it does detect the logical volume)
Any suggestions?
HARDWARE: ProLiant BL465c Gen8
2x AMD Opteron(tm) Processor 6376 (16 Cores)
P220i raid controller (RAID 1 2x250GB SSD)
Thanks