Hello y'all!
Having this issue that recently appeared, I think I might know the issue, but doesn't make sense as to why this is happening.
Basically, I've created a VLAN, and dubbed it my DMZ on my network (using a unifi router), and put two containers within there.
For some reason, all containers in the VLAN restart like every minute, and I have no idea why. They have enough storage, enough resources allocated, so that can't be the issue.
Even freshly created containers are restarting which makes 0 sense.
On container 101, I have nginx proxy manager installed, and on container 120, I have nextcloud installed.
I have 443 and 80 port forwarded to nginx proxy manager.
I also have tailscale on both of those devices so I can access them (since they are isolated for my network).
I verified it's only containers under that VLAN, other new ones that are created that are not assigned VLAN work fine.
I also did do a mem test, it passed.
Any help is appreciated!
Here's my pveversion --verbose output:
Here's my system logs, the containers in question are 101 and 120:
(pastebin because it's long)
https://pastebin.com/1c0TJ5GH
Here's the output of lsblk -o+FSTYPE,LABEL,MODEL,VENDOR,TRAN:
When I turned on my PVE monitor, I saw some errors, see attached, unsure if its related.
And when running debsums -a, I saw no errors, everything appeared with status "OK".
I also have updated my microcode.
Having this issue that recently appeared, I think I might know the issue, but doesn't make sense as to why this is happening.
Basically, I've created a VLAN, and dubbed it my DMZ on my network (using a unifi router), and put two containers within there.
For some reason, all containers in the VLAN restart like every minute, and I have no idea why. They have enough storage, enough resources allocated, so that can't be the issue.
Even freshly created containers are restarting which makes 0 sense.
On container 101, I have nginx proxy manager installed, and on container 120, I have nextcloud installed.
I have 443 and 80 port forwarded to nginx proxy manager.
I also have tailscale on both of those devices so I can access them (since they are isolated for my network).
I verified it's only containers under that VLAN, other new ones that are created that are not assigned VLAN work fine.
I also did do a mem test, it passed.
Any help is appreciated!
Here's my pveversion --verbose output:
Code:
proxmox-ve: 8.4.0 (running kernel: 6.8.12-11-pve)
pve-manager: 8.4.1 (running version: 8.4.1/2a5fa54a8503f96d)
proxmox-kernel-helper: 8.1.1
proxmox-kernel-6.8.12-11-pve-signed: 6.8.12-11
proxmox-kernel-6.8: 6.8.12-11
proxmox-kernel-6.8.12-10-pve-signed: 6.8.12-10
proxmox-kernel-6.8.12-4-pve-signed: 6.8.12-4
ceph-fuse: 17.2.7-pve3
corosync: 3.1.9-pve1
criu: 3.17.1-2+deb12u1
glusterfs-client: 10.3-5
ifupdown2: 3.2.0-1+pmx11
ksm-control-daemon: 1.5-1
libjs-extjs: 7.0.0-5
libknet1: 1.30-pve2
libproxmox-acme-perl: 1.6.0
libproxmox-backup-qemu0: 1.5.1
libproxmox-rs-perl: 0.3.5
libpve-access-control: 8.2.2
libpve-apiclient-perl: 3.3.2
libpve-cluster-api-perl: 8.1.1
libpve-cluster-perl: 8.1.1
libpve-common-perl: 8.3.1
libpve-guest-common-perl: 5.2.2
libpve-http-server-perl: 5.2.2
libpve-network-perl: 0.11.2
libpve-rs-perl: 0.9.4
libpve-storage-perl: 8.3.6
libspice-server1: 0.15.1-1
lvm2: 2.03.16-2
lxc-pve: 6.0.0-1
lxcfs: 6.0.0-pve2
novnc-pve: 1.6.0-2
proxmox-backup-client: 3.4.2-1
proxmox-backup-file-restore: 3.4.2-1
proxmox-firewall: 0.7.1
proxmox-kernel-helper: 8.1.1
proxmox-mail-forward: 0.3.3
proxmox-mini-journalreader: 1.5
proxmox-offline-mirror-helper: 0.6.7
proxmox-widget-toolkit: 4.3.11
pve-cluster: 8.1.1
pve-container: 5.2.6
pve-docs: 8.4.0
pve-edk2-firmware: 4.2025.02-3
pve-esxi-import-tools: 0.7.4
pve-firewall: 5.1.1
pve-firmware: 3.15-4
pve-ha-manager: 4.0.7
pve-i18n: 3.4.5
pve-qemu-kvm: 9.2.0-5
pve-xtermjs: 5.5.0-2
qemu-server: 8.3.13
smartmontools: 7.3-pve1
spiceterm: 3.3.0
swtpm: 0.8.0+pve1
vncterm: 1.8.0
zfsutils-linux: 2.2.7-pve2Here's my system logs, the containers in question are 101 and 120:
(pastebin because it's long)
https://pastebin.com/1c0TJ5GH
Here's the output of lsblk -o+FSTYPE,LABEL,MODEL,VENDOR,TRAN:
Code:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS FSTYPE LABEL MODEL VENDOR TRAN
nvme0n1
259:0 0 953.9G 0 disk SPCC nvme
├─nvme0n1p1
│ 259:1 0 1007K 0 part nvme
├─nvme0n1p2
│ 259:2 0 1G 0 part /boot/efi vfat nvme
└─nvme0n1p3
259:3 0 952.9G 0 part LVM2_m nvme
├─pve-swap
│ 252:0 0 8G 0 lvm [SWAP] swap
├─pve-root
│ 252:1 0 96G 0 lvm / ext4
├─pve-data_tmeta
│ 252:2 0 8.3G 0 lvm
│ └─pve-data-tpool
│ 252:4 0 816.2G 0 lvm
│ ├─pve-data
│ │ 252:5 0 816.2G 1 lvm
│ ├─pve-vm--109--disk--0
│ │ 252:6 0 12G 0 lvm ext4
│ ├─pve-vm--119--disk--0
│ │ 252:7 0 10G 0 lvm ext4
│ ├─pve-vm--101--disk--0
│ │ 252:8 0 6G 0 lvm ext4
│ ├─pve-vm--108--disk--0
│ │ 252:9 0 4G 0 lvm ext4
│ ├─pve-vm--116--disk--0
│ │ 252:10 0 10G 0 lvm ext4
│ ├─pve-vm--102--disk--0
│ │ 252:11 0 10G 0 lvm ext4
│ ├─pve-vm--103--disk--0
│ │ 252:12 0 10G 0 lvm ext4
│ ├─pve-vm--112--disk--0
│ │ 252:13 0 8G 0 lvm ext4
│ ├─pve-vm--100--disk--0
│ │ 252:14 0 4G 0 lvm ext4
│ ├─pve-vm--110--disk--0
│ │ 252:15 0 4G 0 lvm ext4
│ ├─pve-vm--111--disk--0
│ │ 252:16 0 8G 0 lvm ext4
│ ├─pve-vm--113--disk--0
│ │ 252:17 0 6G 0 lvm ext4
│ ├─pve-vm--105--disk--0
│ │ 252:18 0 21G 0 lvm ext4
│ ├─pve-vm--114--disk--0
│ │ 252:19 0 8G 0 lvm ext4
│ ├─pve-vm--121--disk--0
│ │ 252:20 0 10G 0 lvm ext4
│ ├─pve-vm--115--disk--0
│ │ 252:21 0 8G 0 lvm ext4
│ ├─pve-vm--117--disk--0
│ │ 252:22 0 20G 0 lvm ext4
│ ├─pve-vm--118--disk--0
│ │ 252:23 0 10G 0 lvm ext4
│ ├─pve-vm--123--disk--0
│ │ 252:24 0 15G 0 lvm ext4
│ ├─pve-vm--122--disk--0
│ │ 252:25 0 2G 0 lvm ext4
│ ├─pve-vm--125--disk--0
│ │ 252:26 0 15G 0 lvm ext4
│ ├─pve-vm--126--disk--0
│ │ 252:27 0 6G 0 lvm ext4
│ ├─pve-vm--127--disk--0
│ │ 252:28 0 2G 0 lvm ext4
│ ├─pve-vm--128--disk--0
│ │ 252:29 0 2G 0 lvm ext4
│ ├─pve-vm--104--disk--0
│ │ 252:30 0 50G 0 lvm ext4
│ ├─pve-vm--131--disk--0
│ │ 252:31 0 8G 0 lvm ext4
│ ├─pve-vm--132--disk--0
│ │ 252:32 0 2G 0 lvm ext4
│ ├─pve-vm--134--disk--0
│ │ 252:33 0 2G 0 lvm ext4
│ ├─pve-vm--135--disk--0
│ │ 252:34 0 15G 0 lvm ext4
│ ├─pve-vm--136--disk--0
│ │ 252:35 0 10G 0 lvm ext4
│ ├─pve-vm--120--disk--0
│ │ 252:36 0 25G 0 lvm ext4
│ ├─pve-vm--107--disk--0
│ │ 252:37 0 6G 0 lvm ext4
│ ├─pve-vm--124--disk--0
│ │ 252:38 0 20G 0 lvm ext4
│ ├─pve-vm--129--disk--0
│ │ 252:39 0 6G 0 lvm ext4
│ ├─pve-vm--130--disk--0
│ │ 252:40 0 4M 0 lvm
│ ├─pve-vm--130--disk--1
│ │ 252:41 0 32G 0 lvm
│ ├─pve-vm--133--disk--0
│ │ 252:42 0 10G 0 lvm ext4
│ ├─pve-vm--106--disk--0
│ │ 252:43 0 15G 0 lvm ext4
│ └─pve-vm--137--disk--0
│ 252:44 0 15G 0 lvm ext4
└─pve-data_tdata
252:3 0 816.2G 0 lvm
└─pve-data-tpool
252:4 0 816.2G 0 lvm
├─pve-data
│ 252:5 0 816.2G 1 lvm
├─pve-vm--109--disk--0
│ 252:6 0 12G 0 lvm ext4
├─pve-vm--119--disk--0
│ 252:7 0 10G 0 lvm ext4
├─pve-vm--101--disk--0
│ 252:8 0 6G 0 lvm ext4
├─pve-vm--108--disk--0
│ 252:9 0 4G 0 lvm ext4
├─pve-vm--116--disk--0
│ 252:10 0 10G 0 lvm ext4
├─pve-vm--102--disk--0
│ 252:11 0 10G 0 lvm ext4
├─pve-vm--103--disk--0
│ 252:12 0 10G 0 lvm ext4
├─pve-vm--112--disk--0
│ 252:13 0 8G 0 lvm ext4
├─pve-vm--100--disk--0
│ 252:14 0 4G 0 lvm ext4
├─pve-vm--110--disk--0
│ 252:15 0 4G 0 lvm ext4
├─pve-vm--111--disk--0
│ 252:16 0 8G 0 lvm ext4
├─pve-vm--113--disk--0
│ 252:17 0 6G 0 lvm ext4
├─pve-vm--105--disk--0
│ 252:18 0 21G 0 lvm ext4
├─pve-vm--114--disk--0
│ 252:19 0 8G 0 lvm ext4
├─pve-vm--121--disk--0
│ 252:20 0 10G 0 lvm ext4
├─pve-vm--115--disk--0
│ 252:21 0 8G 0 lvm ext4
├─pve-vm--117--disk--0
│ 252:22 0 20G 0 lvm ext4
├─pve-vm--118--disk--0
│ 252:23 0 10G 0 lvm ext4
├─pve-vm--123--disk--0
│ 252:24 0 15G 0 lvm ext4
├─pve-vm--122--disk--0
│ 252:25 0 2G 0 lvm ext4
├─pve-vm--125--disk--0
│ 252:26 0 15G 0 lvm ext4
├─pve-vm--126--disk--0
│ 252:27 0 6G 0 lvm ext4
├─pve-vm--127--disk--0
│ 252:28 0 2G 0 lvm ext4
├─pve-vm--128--disk--0
│ 252:29 0 2G 0 lvm ext4
├─pve-vm--104--disk--0
│ 252:30 0 50G 0 lvm ext4
├─pve-vm--131--disk--0
│ 252:31 0 8G 0 lvm ext4
├─pve-vm--132--disk--0
│ 252:32 0 2G 0 lvm ext4
├─pve-vm--134--disk--0
│ 252:33 0 2G 0 lvm ext4
├─pve-vm--135--disk--0
│ 252:34 0 15G 0 lvm ext4
├─pve-vm--136--disk--0
│ 252:35 0 10G 0 lvm ext4
├─pve-vm--120--disk--0
│ 252:36 0 25G 0 lvm ext4
├─pve-vm--107--disk--0
│ 252:37 0 6G 0 lvm ext4
├─pve-vm--124--disk--0
│ 252:38 0 20G 0 lvm ext4
├─pve-vm--129--disk--0
│ 252:39 0 6G 0 lvm ext4
├─pve-vm--130--disk--0
│ 252:40 0 4M 0 lvm
├─pve-vm--130--disk--1
│ 252:41 0 32G 0 lvm
├─pve-vm--133--disk--0
│ 252:42 0 10G 0 lvm ext4
├─pve-vm--106--disk--0
│ 252:43 0 15G 0 lvm ext4
└─pve-vm--137--disk--0
252:44 0 15G 0 lvm ext4When I turned on my PVE monitor, I saw some errors, see attached, unsure if its related.
And when running debsums -a, I saw no errors, everything appeared with status "OK".
I also have updated my microcode.
Attachments
Last edited: