Networking problem after Proxmox 2.1 install on hp proliant.

O

oaeide

Guest
Hi. After installing Proxmox 2.1-f9b0f63a-26 yesterday, I find myself unable to ping the proxmox-box or ping anything else from it. I have tried searching about, but so far I have not been able to find useful information. Please help, I will try to provide as much information I can, but please tell me if there is anything else I need to post.

Server: HP-proliant Dl360 G7
Nic: Allied Telesis AT-2711 FX/SC (fiber) <-- tg3 driver
Switch: Cisco catalyst 3750


Code: 
eth0      Link encap:Ethernet  HWaddr ec:cd:6d:0d:84:a0            inet6 addr: fe80::eecd:6dff:fe0d:84a0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1599 errors:0 dropped:1257 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:125826 (122.8 KiB)  TX bytes:0 (0.0 B)
          Interrupt:24 


lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:258 errors:0 dropped:0 overruns:0 frame:0
          TX packets:258 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:25553 (24.9 KiB)  TX bytes:25553 (24.9 KiB)


venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet6 addr: fe80::1/128 Scope:Link
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:3 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)


vmbr0     Link encap:Ethernet  HWaddr ec:cd:6d:0d:84:a0  
          inet addr:10.0.0.35  Bcast:10.0.0.255  Mask:255.255.255.0
          inet6 addr: fe80::eecd:6dff:fe0d:84a0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:369 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:15714 (15.3 KiB)

Code: 
auto loiface lo inet loopback


iface eth0 inet manual


auto vmbr0
iface vmbr0 inet static    
    address 10.0.0.35
    netmask 255.255.255.0
    gateway 10.0.0.23
    bridge_ports eth0
    bridge_stp off
    bridge_fd 0



Code: 
PING 10.0.0.23 (10.0.0.23) 56(84) bytes of data.From 10.0.0.35 icmp_seq=2 Destination Host Unreachable
From 10.0.0.35 icmp_seq=3 Destination Host Unreachable
From 10.0.0.35 icmp_seq=4 Destination Host Unreachable


--- 10.0.0.23 ping statistics ---
4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2999ms
pipe 3

Code: 
PING 10.0.0.1 (10.0.0.1) 56(84) bytes of data.From 10.0.0.35 icmp_seq=2 Destination Host Unreachable
From 10.0.0.35 icmp_seq=3 Destination Host Unreachable
From 10.0.0.35 icmp_seq=4 Destination Host Unreachable


--- 10.0.0.1 ping statistics ---
4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2999ms
pipe 3


Code: 
Kernel IP routing tableDestination     Gateway         Genmask         Flags Metric Ref    Use Iface
10.0.0.0        0.0.0.0         255.255.255.0   U     0      0        0 vmbr0
0.0.0.0         10.0.0.23       0.0.0.0         UG    0      0        0 vmbr0


dmesg | grep eth:
Code: 
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff88011f6b1650), AE_AML_BUFFER_LIMITtg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95752) rev 6002] (PCI Express) MAC address ec:cd:6d:0d:84:a0
tg3 0000:09:00.0: eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:09:00.0: eth0: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
bnx2 0000:03:00.0: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f4000000, IRQ 30, node addr 68:b5:99:c0:a1:50
bnx2 0000:03:00.1: eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f2000000, IRQ 37, node addr 68:b5:99:c0:a1:52
bnx2 0000:04:00.0: eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 31, node addr 68:b5:99:c0:a1:44
bnx2 0000:04:00.1: eth4: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 39, node addr 68:b5:99:c0:a1:46
device eth0 entered promiscuous mode
tg3 0000:09:00.0: eth0: DMA Status error.  Resetting chip.
tg3 0000:09:00.0: eth0: 0x00000000: 0x160014e4, 0x00100446, 0x02000002, 0x00000010
tg3 0000:09:00.0: eth0: 0x00000010: 0xfbff0004, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000020: 0x00000000, 0x00000000, 0x00000000, 0x27051259
tg3 0000:09:00.0: eth0: 0x00000030: 0x00000000, 0x00000048, 0x00000000, 0x0000010a
tg3 0000:09:00.0: eth0: 0x00000040: 0x00000000, 0x00000000, 0xc0025001, 0x64002000
tg3 0000:09:00.0: eth0: 0x00000050: 0x00005803, 0x00000000, 0x0087d005, 0xfee00478
tg3 0000:09:00.0: eth0: 0x00000060: 0x00000000, 0x00000000, 0x60020298, 0x76180000
tg3 0000:09:00.0: eth0: 0x00000070: 0x000010f2, 0x00000040, 0x00000414, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000080: 0x6d0d84a0, 0x00000000, 0x04130034, 0x24081082
tg3 0000:09:00.0: eth0: 0x00000090: 0x01000749, 0x00000000, 0x00000000, 0x000000c8
tg3 0000:09:00.0: eth0: 0x000000b0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000000c0: 0x00000000, 0x00000000, 0x0000000e, 0x00000000
tg3 0000:09:00.0: eth0: 0x000000d0: 0x00010010, 0x00000fa2, 0x00165006, 0x00036c11
tg3 0000:09:00.0: eth0: 0x000000e0: 0x10110000, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000100: 0x13c10001, 0x00154000, 0x00100000, 0x00062011
tg3 0000:09:00.0: eth0: 0x00000110: 0x00000000, 0x00000000, 0x000000b2, 0x4a000040
tg3 0000:09:00.0: eth0: 0x00000120: 0x00000f60, 0x09000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000130: 0x00000000, 0x00000000, 0x00000000, 0x00010002
tg3 0000:09:00.0: eth0: 0x00000150: 0x800000ff, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000180: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00000190: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000001a0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000001b0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00000200: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00000210: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00000220: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00000230: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00000240: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00000250: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00000260: 0x00000000, 0x00000001, 0x00000000, 0x000000c8
tg3 0000:09:00.0: eth0: 0x00000270: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00000400: 0x00e04808, 0x04401000, 0x00001000, 0x00005d00
tg3 0000:09:00.0: eth0: 0x00000410: 0x0000eccd, 0x6d0d84a0, 0x0000eccd, 0x6d0d84a0
tg3 0000:09:00.0: eth0: 0x00000420: 0x0000eccd, 0x6d0d84a0, 0x0000eccd, 0x6d0d84a0
tg3 0000:09:00.0: eth0: 0x00000430: 0x00000000, 0x00000000, 0x0000029d, 0x000005f2
tg3 0000:09:00.0: eth0: 0x00000440: 0x00000000, 0x00000000, 0x00000000, 0x08340000
tg3 0000:09:00.0: eth0: 0x00000450: 0x00000001, 0x000c0000, 0x00000000, 0x00000002
tg3 0000:09:00.0: eth0: 0x00000460: 0x00000008, 0x00002620, 0x00000502, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000480: 0x42000000, 0x7fffffff, 0x06000004, 0x7fffffff
tg3 0000:09:00.0: eth0: 0x00000500: 0x00000008, 0x00000002, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000590: 0x00e00000, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000600: 0xffffffff, 0x00f80011, 0x00000000, 0x00001f04
tg3 0000:09:00.0: eth0: 0x00000610: 0xffffffff, 0x00000000, 0x07c00004, 0x30000000
tg3 0000:09:00.0: eth0: 0x00000620: 0x00000001, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000800: 0x00000000, 0xffffffff, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000810: 0x00000000, 0xffffffff, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000820: 0x00000000, 0x00000000, 0xffffffff, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000830: 0x00000000, 0xffffffff, 0xffffffff, 0xffffffff
tg3 0000:09:00.0: eth0: 0x00000840: 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff
tg3 0000:09:00.0: eth0: 0x00000850: 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff
tg3 0000:09:00.0: eth0: 0x00000860: 0xffffffff, 0xffffffff, 0xffffffff, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000880: 0x00000000, 0x00004563, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x000008f0: 0x00000001, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000c00: 0x0000000a, 0x00000000, 0x00000003, 0x00000001
tg3 0000:09:00.0: eth0: 0x00000ce0: 0x01c01010, 0x00802100, 0x00401843, 0x00000000
tg3 0000:09:00.0: eth0: 0x00000cf0: 0x00000008, 0x40000000, 0x0b020040, 0x00000000
tg3 0000:09:00.0: eth0: 0x00001000: 0x00000002, 0x00000000, 0xa0000001, 0x00000000
tg3 0000:09:00.0: eth0: 0x00001010: 0x00000c08, 0x00000001, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00001400: 0x00000006, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00001480: 0x00000001, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00001800: 0x00000016, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00001840: 0x00000000, 0x00000000, 0x00000200, 0x00000010
tg3 0000:09:00.0: eth0: 0x00001850: 0x1b25e010, 0x00000001, 0x00004010, 0x00000002
tg3 0000:09:00.0: eth0: 0x00001c00: 0x00000002, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002000: 0x00000002, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002010: 0x00000181, 0x00000001, 0x0079800b, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002100: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002110: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002120: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002130: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002140: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002150: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002160: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002170: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002180: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002190: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x000021a0: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x000021b0: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x000021c0: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x000021d0: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x000021e0: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x000021f0: 0x000c6c3a, 0x000d3098, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002400: 0x00000012, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002450: 0x00000001, 0x18e60000, 0x02000000, 0x00006000
tg3 0000:09:00.0: eth0: 0x000024c0: 0x08000001, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002800: 0x00000006, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00002c00: 0x00000006, 0x00000000, 0x00000000, 0x0000007f
tg3 0000:09:00.0: eth0: 0x00002c10: 0x00000000, 0x00000000, 0x00000008, 0x00000000
tg3 0000:09:00.0: eth0: 0x00003000: 0x00000006, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00003800: 0x00000003, 0x00000001, 0x0000000e, 0x0516028b
tg3 0000:09:00.0: eth0: 0x00003810: 0x00000100, 0x00000018, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00003c00: 0x00000302, 0x00000000, 0x00000014, 0x00000048
tg3 0000:09:00.0: eth0: 0x00003c10: 0x00000005, 0x00000035, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00003c20: 0x00000005, 0x00000005, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00003c30: 0x00000000, 0x00000000, 0x00000001, 0x1d11d000
tg3 0000:09:00.0: eth0: 0x00003c40: 0x00000000, 0x00000b00, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00004000: 0x00000002, 0x00000000, 0x00022081, 0x001000b0
tg3 0000:09:00.0: eth0: 0x00004010: 0x00860000, 0x00000012, 0x00800400, 0x00840ff2
tg3 0000:09:00.0: eth0: 0x00004020: 0x00000000, 0x00000000, 0x00000010, 0x00000000
tg3 0000:09:00.0: eth0: 0x00004030: 0x00000010, 0x00000030, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00004040: 0x00000000, 0x00000000, 0x00000010, 0x00000000
tg3 0000:09:00.0: eth0: 0x00004050: 0x00000000, 0x00000000, 0x00004040, 0x02001002
tg3 0000:09:00.0: eth0: 0x00004060: 0x00400000, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00004400: 0x00000006, 0x00000000, 0x00011080, 0x0000df80
tg3 0000:09:00.0: eth0: 0x00004410: 0x00000000, 0x00000010, 0x00000060, 0x00000000
tg3 0000:09:00.0: eth0: 0x00004420: 0x0000003d, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00004440: 0x00000000, 0x00000000, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00004450: 0x000103be, 0x00000001, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00004800: 0x080303fe, 0x00000010, 0x01000000, 0x00000020
tg3 0000:09:00.0: eth0: 0x00004810: 0x00000011, 0x00000004, 0x00000001, 0x00000004
tg3 0000:09:00.0: eth0: 0x00004820: 0x0f680000, 0x00000000, 0xa0a40f60, 0x18e60080
tg3 0000:09:00.0: eth0: 0x00004830: 0x00000f60, 0x00000010, 0x0000010f, 0x00000000
tg3 0000:09:00.0: eth0: 0x00004840: 0x00000000, 0x00000000, 0x00008000, 0x00080800
tg3 0000:09:00.0: eth0: 0x00004850: 0x08040200, 0x10040000, 0x01000100, 0x00000000
tg3 0000:09:00.0: eth0: 0x00004c00: 0x000003fe, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00004c10: 0x00000000, 0x00000000, 0x00000006, 0x00000000
tg3 0000:09:00.0: eth0: 0x00004c20: 0x00000000, 0x00000000, 0x00000000, 0x00000006
tg3 0000:09:00.0: eth0: 0x00004c30: 0x00002000, 0x00000000, 0x00000010, 0x00000010
tg3 0000:09:00.0: eth0: 0x00004c40: 0x00000000, 0x1d11d000, 0x00010020, 0x00000020
tg3 0000:09:00.0: eth0: 0x00005000: 0x00009800, 0x80004000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00005010: 0x00000000, 0x00000000, 0x00000000, 0x00010858
tg3 0000:09:00.0: eth0: 0x00005020: 0xafb10014, 0x00000000, 0x00000000, 0x40000020
tg3 0000:09:00.0: eth0: 0x00005030: 0x00000000, 0x0000001d, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00005040: 0x00000000, 0x00000000, 0x00010e02, 0x00000000
tg3 0000:09:00.0: eth0: 0x00005200: 0x0001ff98, 0x0001ff98, 0x0001ff98, 0x00010858
tg3 0000:09:00.0: eth0: 0x00005210: 0x0001ffb8, 0x0001ff98, 0x00000000, 0x0001ff98
tg3 0000:09:00.0: eth0: 0x00005220: 0x4b657654, 0x00000000, 0x00000000, 0xc0000000
tg3 0000:09:00.0: eth0: 0x00005230: 0xdeaddead, 0x00009800, 0x00000000, 0xc0000000
tg3 0000:09:00.0: eth0: 0x00005240: 0x0001ff98, 0x00010858, 0x00000000, 0x0001ff98
tg3 0000:09:00.0: eth0: 0x00005250: 0x4b657654, 0x00000000, 0xdeaddead, 0x00000000
tg3 0000:09:00.0: eth0: 0x00005260: 0xdeaddead, 0xc0000000, 0x0001ff98, 0xc0000000
tg3 0000:09:00.0: eth0: 0x00005270: 0x00010858, 0x0001ffb8, 0x0001ff98, 0x00000000
tg3 0000:09:00.0: eth0: 0x00005800: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005810: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005820: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005830: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005840: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005850: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005860: 0x00000000, 0x00000001, 0x00000000, 0x000000c8
tg3 0000:09:00.0: eth0: 0x00005870: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005880: 0x00000000, 0x00000000, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005890: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000058a0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000058b0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000058c0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000058d0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000058e0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000058f0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005900: 0x00000000, 0x00000000, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005910: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005920: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005930: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005940: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005950: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005960: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005970: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005980: 0x00000000, 0x00000000, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005990: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000059a0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000059b0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000059c0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000059d0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000059e0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x000059f0: 0x00000000, 0x00000001, 0x00000000, 0x00000001
tg3 0000:09:00.0: eth0: 0x00005a00: 0x00012001, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00006000: 0x00000002, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00006800: 0x04130034, 0x24081082, 0x01000749, 0x002fab5f
tg3 0000:09:00.0: eth0: 0x00006810: 0x83120000, 0xffffffff, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00006830: 0xfffc3ccf, 0xfffc3fff, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00006840: 0x00000004, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00006890: 0x00000001, 0x8001f000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00006c00: 0x00000040, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00006c40: 0x00000000, 0x000f0000, 0x00000000, 0x0000007c
tg3 0000:09:00.0: eth0: 0x00006c50: 0x00000000, 0x00000000, 0x000000ff, 0x00000000
tg3 0000:09:00.0: eth0: 0x00007000: 0x00000108, 0x00000000, 0x00000000, 0x000000c0
tg3 0000:09:00.0: eth0: 0x00007010: 0x0a000064, 0x56008273, 0x00570081, 0x68848353
tg3 0000:09:00.0: eth0: 0x00007020: 0x00000000, 0x00000000, 0xaf000406, 0x00000000
tg3 0000:09:00.0: eth0: 0x00007030: 0x0003e200, 0x00000000, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0x00007400: 0x00000000, 0x000002aa, 0x00000000, 0x00000000
tg3 0000:09:00.0: eth0: 0: Host status block [00000007:00000004:(0000:0000:0000):(0000:0000)]
tg3 0000:09:00.0: eth0: 0: NAPI info [00000000:00000000:(0000:0000:01ff):0000:(00c8:0000:0000:0000)]
tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, half duplex
tg3 0000:09:00.0: eth0: Flow control is off for TX and off for RX
tg3 0000:09:00.0: eth0: Link is down
tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, half duplex
tg3 0000:09:00.0: eth0: Flow control is off for TX and off for RX
vmbr0: port 1(eth0) entering forwarding state
eth0: no IPv6 routers present
 
Last edited by a moderator:
Hi,
100Mbit half-duplex with fibre?? This sounds not ok - i think this is the reason, why you don't receive any packets.

Perhaps you should try to set the right settings with ethtool, or use one of the bnx2-nics?

Udo
 
Thanks for the replies. I am sorry I have not responded before, did not have the opportunity.

dietmar: I will try to test the pvetest-kernel, but i am having some trouble finding it to be honest, and this page shows the stable instead of the pvetest-config.
Click to expand...

ops, my mistake. Will try this now.

udo: I think it is full duplex, just that early in the boot it is half. I tried "mii-tool -v eth0" and it shows full duplex
Click to expand...

Nevermind, mii-tool actually shows it IS half duplex, even after i do "mii-tool -F 100baseTx-FD eth0".


Update

I installed the kernel from the pvetest repo, and did a full upgrade. I also installed ethtool while I was at it. I am now able to configure full duplex with this command:
"ethtool -s eth0 autoneg off speed 100 duplex full", however my problem still persists. There is one thing i find odd, and that is the output of "ethtool eth0";

Settings for eth0: Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: Not reported
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: off
MDI-X: off
Supports Wake-on: g
Wake-on: g
Current message level: 0x000000ff (255)
Link detected: yes
Click to expand...

Should it not show rx/tx instead of just T?
 
Last edited by a moderator:
Hi Admin,

I experienced the same with Proxmox VE 2.2 and HP Proliant DL360 G7. The proxmox server has no network connectivity to any devices (switch, other nodes). I installed promox in two different Proliant DL360 G7 server but same problem occur.

I wonder if the poster was able to resolve the issue. Please share them there.

Thanks and appreciate any response.
 
Hi Admin

I have the same problem with Proxmox VE 2.2 on HP Proliant DL360 G7 server. The newly installed proxmox don't have any network connectivity in any devices (cisco switch, pc). I installed two instances and I can confirm both have the same problem.

I wonder if the original poster was able to resolve this issue? In case please share them here.

I shall appreciate any help on the matter.

Thanks and have a nice day!
 
Hi,
i hope someone can help. I have installed V2.0.1 and the hostsystem shows correct 1000mb/s but the kvm vms shows only 10mb/s on tap. i cant change it:
ethtool -s tap103i0 autoneg off speed 1000 duplex full
Cannot set new settings: Operation not supported
not setting speed
not setting duplex
not setting autoneg
Click to expand...
what can i do?
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back