Network Troubles @Hetzner - Drivers?

[whateva]

Hi Everybody,

I just set up a proxmox VE on a EX40-SSD at Hetzner and I am experiencing funny network behaviour... Generally said it's just not working so well. I already installed other systems on exactly that server and they are working fine, it's just getting fucked up when I use proxmox.

Here's an example when I download a vz template, it just takes forever

root@wirt /var/lib/vz/template/cache # wget http://download.openvz.org/template/precreated/ubuntu-12.10-x86_64.tar.gz
--2013-11-18 13:30:35--  http://download.openvz.org/template/precreated/ubuntu-12.10-x86_64.tar.gz
Resolving download.openvz.org (download.openvz.org)... 2620:e6::104:11, 199.115.104.11
Connecting to download.openvz.org (download.openvz.org)|2620:e6::104:11|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 226877386 (216M) [application/x-gzip]
Saving to: `ubuntu-12.10-x86_64.tar.gz'

48% [===================================>                                      ] 110,374,504 2.79K/s  eta 2m 22s  
48% [===================================>                                      ] 110,384,500 9.54K/s  eta 2m 22s  



48% [===================================>                                      ] 110,384,500 --.-K/s  eta 2m 41s  
48% [===================================>                                      ] 110,384,500 --.-K/s  eta 2m 41s  

48% [===================================>                                      ] 110,481,604 --.-K/s   in 21m 49s 

2013-11-18 13:52:26 (82.4 KB/s) - Read error at byte 110481604/226877386 (Connection timed out). Retrying.

--2013-11-18 13:52:27--  (try: 2)  http://download.openvz.org/template/precreated/ubuntu-12.10-x86_64.tar.gz
Connecting to download.openvz.org (download.openvz.org)|2620:e6::104:11|:80... connected.
HTTP request sent, awaiting response... 206 Partial Content
Length: 226877386 (216M), 116395782 (111M) remaining [application/x-gzip]
Saving to: `ubuntu-12.10-x86_64.tar.gz'

61% [++++++++++++++++++++++++++++++++++++========>                             ] 139,834,448 69.0K/s   in 5m 11s  

2013-11-18 13:57:38 (92.3 KB/s) - Connection closed at byte 139834448. Retrying.

--2013-11-18 13:57:40--  (try: 3)  http://download.openvz.org/template/precreated/ubuntu-12.10-x86_64.tar.gz
Connecting to download.openvz.org (download.openvz.org)|2620:e6::104:11|:80... connected.
HTTP request sent, awaiting response... 206 Partial Content
Length: 226877386 (216M), 87042938 (83M) remaining [application/x-gzip]
Saving to: `ubuntu-12.10-x86_64.tar.gz'

100%[+++++++++++++++++++++++++++++++++++++++++++++============================>] 226,877,386  738K/s   in 2m 17s  

2013-11-18 13:59:57 (619 KB/s) - `ubuntu-12.10-x86_64.tar.gz' saved [226877386/226877386]

root@wirt /var/lib/vz/template/cache #

Needless to mention, normally that's blazin fast!

I noticed that during the installation the Realtek firmware gets replaced with some other kind, I guess it has to do with that?

Did anybody else have the same problem? Hetzner doesn't support the proxmox image...

Thank you.

 

[Patschi]

Did you installed a clean Debian Wheezy and used the installation manual on http://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Wheezy? I have the EX40 from Hetzner and it's always running without any issues.

 

[whateva]

I used the Hetzner image - today I also haven't had any troubles ... I'm worried this will occur again, in a bad moment probably

 

[michah]

between 16.11 and 17.11 there was a huge inbound DDOS against Hetzner. Maybe you see this in your download-performance.

 

[whateva]

Guess that was it - didn't have trouble since then