Network Hotplug - Error "What is ":1"?"

[aychprox]

I just try to update one of the node with dist-upgrade.
Bugs seems in recent iproute2 (4.13.0-1) update. VM that with rate limit unable to start now. It can only start after remove the rate limit. change the rate-limit by hotplug also not possible now.

=== Output ===
What is ":1"?
Usage: ... basic [ match EMATCH_TREE ]
[ action ACTION_SPEC ] [ classid CLASSID ]

Where: SELECTOR := SAMPLE SAMPLE ...
FILTERID := X:Y:Z
ACTION_SPEC := ... look at individual actions

NOTE: CLASSID is parsed as hexadecimal input.

Spoiler: package version

proxmox-ve: 5.1-38 (running kernel: 4.13.13-5-pve) pve-manager: 5.1-43 (running version: 5.1-43/bdb08029) pve-kernel-4.13.13-4-pve: 4.13.13-35 pve-kernel-4.13.13-5-pve: 4.13.13-38 libpve-http-server-perl: 2.0-8 lvm2: 2.02.168-pve6 corosync: 2.4.2-pve3 libqb0: 1.0.1-1 pve-cluster: 5.0-19 qemu-server: 5.0-20 pve-firmware: 2.0-3 libpve-common-perl: 5.0-25 libpve-guest-common-perl: 2.0-14 libpve-access-control: 5.0-7 libpve-storage-perl: 5.0-17 pve-libspice-server1: 0.12.8-3 vncterm: 1.5-3 pve-docs: 5.1-16 pve-qemu-kvm: 2.9.1-6 pve-container: 2.0-18 pve-firewall: 3.0-5 pve-ha-manager: 2.0-4 ksm-control-daemon: not correctly installed glusterfs-client: 3.8.8-1 lxc-pve: 2.1.1-2 lxcfs: 2.0.8-1 criu: 2.11.1-1~bpo90 novnc-pve: 0.6-4 smartmontools: 6.5+svn4324-1 zfsutils-linux: 0.7.4-pve2~bpo9 openvswitch-switch: 2.7.0-2 ceph: 12.2.2-pve1

=== Error when change rate limit on running VM ===
Parameter verification failed. (400)

net0: hotplug problem - command '/sbin/tc filter add dev tap109i0 parent ffff: prio 50 basic police rate 1048576bps burst 1048576b mtu 64kb drop flowid :1' failed: exit code 1

 

[aychprox]

Update: temporary downgrade iproute2 to ver. 4.10.0-1, work as normal.

 

[Wojciech Błaszkowski]

Downgrade solved my problem, thanks!
You can also block iproute2 for being upgraded before problem with that package will be solved:
apt-mark hold iproute2
(apt-mark unhold iproute2 - for removal hold)

 

[robertb]

Hello,

thanks for the suggestion.
apt install iproute2=4.10.0-1 solved it for me too.

best regards

 

[Wojciech Błaszkowski]

Hello,

iproute2=4.13.0-3 is working fine, you can upgrade safetly.

 

[robertb]

Thanks for updating the thread.