Hello,
I have installed Proxmox VE 4.2.2 on my IBM x3850 M2 Server.
This server has a total of 4 CPU's with 6 Cores each.
However only 20 of these are used by PVE.
lscpu reports this:
Looking in the bios all of them are available.
Thanks in advance,
Thalhammer
I have installed Proxmox VE 4.2.2 on my IBM x3850 M2 Server.
This server has a total of 4 CPU's with 6 Cores each.
However only 20 of these are used by PVE.
lscpu reports this:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 20
On-line CPU(s) list: 0-15,20-23
Thread(s) per core: 1
Core(s) per socket: 5
Socket(s): 4
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 29
Model name: Intel(R) Xeon(R) CPU X7460 @ 2.66GHz
Stepping: 1
CPU MHz: 2665.622
BogoMIPS: 5331.31
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 3072K
L3 cache: 16384K
NUMA node0 CPU(s): 0-15,20-23
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 20
On-line CPU(s) list: 0-15,20-23
Thread(s) per core: 1
Core(s) per socket: 5
Socket(s): 4
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 29
Model name: Intel(R) Xeon(R) CPU X7460 @ 2.66GHz
Stepping: 1
CPU MHz: 2665.622
BogoMIPS: 5331.31
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 3072K
L3 cache: 16384K
NUMA node0 CPU(s): 0-15,20-23
Looking in the bios all of them are available.
Thanks in advance,
Thalhammer