Hello,
I wan't to make migration tests of KVM Machines.
The machine I wan't to migrate was created on vmhost1. The machine is running well on this host.
But Online or Offline Migration to vmhost2 fails with error:
Both machines have the same software version (2.0-59/18400f07)
All storages are identically created on the machines (iscsi, nfs)
After the machine is migrated to vmhost2 the machine is offline and starting the machine fails with error:
Any ideas?
Thx and best regards
Benjamin
I wan't to make migration tests of KVM Machines.
The machine I wan't to migrate was created on vmhost1. The machine is running well on this host.
But Online or Offline Migration to vmhost2 fails with error:
PHP:
Apr 17 11:14:55 starting migration of VM 102 to node 'vmhost2' (192.168.61.9)
Apr 17 11:14:55 copying disk images
Apr 17 11:14:55 starting VM 102 on remote node 'vmhost2'
Apr 17 11:14:56 ERROR: online migrate failure - command '/usr/bin/ssh -c blowfish -o 'BatchMode=yes' root@192.168.61.9 qm start 102 --stateuri tcp --skiplock' failed: exit code 255
Apr 17 11:14:57 ERROR: migration finished with problems (duration 00:00:03)
TASK ERROR: migration problems
Both machines have the same software version (2.0-59/18400f07)
All storages are identically created on the machines (iscsi, nfs)
After the machine is migrated to vmhost2 the machine is offline and starting the machine fails with error:
PHP:
Could not access KVM kernel module: No such file or directory
failed to initialize KVM: No such file or directory
No accelerator found!
TASK ERROR: start failed: command '/usr/bin/kvm -id 102 -chardev 'socket,id=monitor,path=/var/run/qemu-server/102.mon,server,nowait' -mon 'chardev=monitor,mode=readline' -vnc unix:/var/run/qemu-server/102.vnc,x509,password -pidfile /var/run/qemu-server/102.pid -daemonize -incoming tcp:localhost:60000 -usbdevice tablet -name ContinuumV7 -smp 'sockets=2,cores=4' -nodefaults -boot 'menu=on' -vga cirrus -k de-ch -drive 'if=none,id=drive-ide2,media=cdrom,aio=native' -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' -drive 'file=/dev/lvm.iscsi.lun0/vm-102-disk-1,if=none,id=drive-virtio0,aio=native,cache=none' -device 'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100' -m 4096 -netdev 'type=tap,id=net0,ifname=tap102i0,script=/var/lib/qemu-server/pve-bridge' -device 'rtl8139,mac=22:07:87:17:F4D,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300'' failed: exit code 1
Any ideas?
Thx and best regards
Benjamin