evening everyone , I have to ask for help because I am going crazy.Last night I created a new pool called hdd1 , configured everything and backed up the data from my mac via Vorta.After all this I shut down , removing the power supply connector to the zimaboard.This afternoon I said to myself I will add a dir to the backup and run zimaboard and Vorta again. Fortunately having connected a video video to the port I get stuck with a "Failed Import ZFS pool hdd1" The system advises me to do "systemctl status-import@hdd.service "Which I am about to do , but I find that the whole PV machine remains with a question mark and is practically unreachable.I then try hot unplugging the 3 hds I had used to back up, I remain unreachable, but on the video connected directly to the ZIMA something moved , a series of strange numbers.
I decide once again to turn the ZIMA off and on again, by doing this I can connect it and try to hot-reconnect one HD at a time. From the video you can read that the HDs are recognized one by one while also maintaining the order (sdc-sdd - sde) but at the end of the day, and at this point, I don't know if it corresponds to the last HD (a new one), it results in a error on sde, yes on the last one inserted, I/O error.WARNING
ool 'hdd1' uncorrectable I/O failure and has been suspended
.......I don't know what I can do........help
I decide once again to turn the ZIMA off and on again, by doing this I can connect it and try to hot-reconnect one HD at a time. From the video you can read that the HDs are recognized one by one while also maintaining the order (sdc-sdd - sde) but at the end of the day, and at this point, I don't know if it corresponds to the last HD (a new one), it results in a error on sde, yes on the last one inserted, I/O error.WARNING
ool 'hdd1' uncorrectable I/O failure and has been suspended.......I don't know what I can do........help