Latest version not booting after installing

[falves1]

I have a Dell R900 with 128 GB of RAM,16 cores, 4 CPUs, 1 Disc of 274 Gb and 2 extra disks of 1.5 TB on a separate controller (Direct attached storage). Proxmox installs only in the small disk, not in the others. However, it never boots after installing. There is no error, the installation finishes fine. The physical machine is fully accessible via any Firefox web browser, because it has the DRAC and it has a public IP.
If I try to install Proxmox on the first large disk, I get an error on the screen and the installation needs to reboot.

I think that this is a bug in the installation ISO. Just to make sure, I am using proxmox-ve_1.8-5754-4.iso

 

[udo]

I have a Dell R900 with 128 GB of RAM,16 cores, 4 CPUs, 1 Disc of 274 Gb and 2 extra disks of 1.5 TB on a separate controller (Direct attached storage). Proxmox installs only in the small disk, not in the others. However, it never boots after installing. There is no error, the installation finishes fine. The physical machine is fully accessible via any Firefox web browser, because it has the DRAC and it has a public IP.
If I try to install Proxmox on the first large disk, I get an error on the screen and the installation needs to reboot.View attachment 460

I think that this is a bug in the installation ISO. Just to make sure, I am using proxmox-ve_1.8-5754-4.iso

Hi,
perhaps the device-ordering in the bios is not right and the installer use not the small disk for grub-install??
Can you try the installation with only the small disk connnected?

Udo