kvm from 1.9 to 2.0 attempt

[bread-baker]

this is almost working. the kvm boots and i can login using console.
the problem is networking .
the following was done to drbd storage

1- untar 1.9 tar file
2- check disk size

 -rw-r--r--  1 root root 2.1G Oct  4 23:42 vm-disk-ide0.raw

3-make new volume group. make sure it is same size or bigger:

lvcreate -L 3G  -n   vm-106-disk-1  drbdvg

4- dd the old one to new

dd if=vm-disk-ide0.raw of=/dev/drbdvg/vm-106-disk-1 bs=4096k

5-copy and edit config file

cp  qemu-server.conf   /etc/pve/qemu-server/106.conf

6-settings i had to change. there is probably more as networking is not working.

#old:  
vlan0: e1000=BA:75:D7:A9:1A:5E
ide0: replicated-drbd1:vm-106-disk-1

#new:  

# to prevent vm 106 - unable to parse value of 'vlan0' - unknown setting 'vlan0' :
net0: e1000=BA:75:D7:A9:1A:5E

# and drbd storage name change:
ide0: proxdrbd:vm-106-disk-1

then start it

qm start 106
*** EHCI support is under development ***

vm 3241 - unable to parse value of 'vlan0' - unknown setting 'vlan0'
      VMID NAME                 STATUS     MEM(MB)    BOOTDISK(GB) PID       
       100 pro4-kvm             running    1024               6.00 173676    
       106 sarge-edi-KVM        running    512                3.00 263432 


ps -ef |grep 263432
root      263432       1  3 19:03 ?        00:01:26 /usr/bin/kvm -id 106 -chardev socket,id=monitor,path=/var/run/qemu-server/106.mon,server,nowait -mon chardev=monitor,mode=readline -vnc unix:/var/run/qemu-server/106.vnc,x509,password -pidfile /var/run/qemu-server/106.pid -daemonize -readconfig /usr/share/qemu-server/pve-usb.cfg -device usb-tablet,bus=ehci.0,port=6 -name sarge-edi-KVM -smp sockets=1,cores=1 -nodefaults -boot menu=on,order=cad -vga cirrus -tdf -localtime -k en-us -drive if=none,id=drive-ide1,media=cdrom,aio=native -device ide-drive,bus=ide.0,unit=1,drive=drive-ide1,id=device-ide1 -drive file=/dev/drbdvg/vm-106-disk-1,if=none,id=drive-ide0,aio=native,boot=on -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0,id=device-ide0 -m 512 -netdev type=user,id=net0,hostname=sarge-edi-KVM -device e1000,romfile=,mac=BA:75:D7:A9:1A:5E,netdev=net0,bus=pci.0,addr=0x12 -cpuunits 1000

Any suggestions to get network fixed?

 

[udo]

Hi,
change your networking-line to something like this:
net0: e1000=BA:757:A9:1A:5E,bridge=vmbr0

Udo

 

[bread-baker]

Udo. - thanks for the response.
but that did not fix the network.

This kvm uses debian sarge . possibly the issue is related to sarge... But I'll check further later on.