I am experiencing a kernel panic with Proxmox 8.0.2 installer. Splash screen pops up allowing you to select what type of install to perform. After picking Graphical, etc.. As it is booting up, this kernel panic happens.
System Specs:
AsrockRack x470d4u / BIOS 4.20 / BCU 03.02.00 All firmware up to date
Ryzen 3600
32GB Crucial Kit (2x16GB) DDR4 3200MHz CL22 (or 2933MHz or 2666MHz) Desktop Memory CT2K16G4DFRA32A
2x 1TB SATA SSD
Nothing populated in any of the PCIe slots
All BIOS settings default except:
SVM Mode - Enabled
IOMMU - Enabled
Things I have Tried:
Memtest86 12hours All passed
Prime95 5 hours All passed
Swapped out RAM with a GSkill 32GB kit, same issues
BIOS Power Supply Idle - Typical
BIOS Disable Global C-State - Disabled
Any ideas?
System Specs:
AsrockRack x470d4u / BIOS 4.20 / BCU 03.02.00 All firmware up to date
Ryzen 3600
32GB Crucial Kit (2x16GB) DDR4 3200MHz CL22 (or 2933MHz or 2666MHz) Desktop Memory CT2K16G4DFRA32A
2x 1TB SATA SSD
Nothing populated in any of the PCIe slots
All BIOS settings default except:
SVM Mode - Enabled
IOMMU - Enabled
Things I have Tried:
Memtest86 12hours All passed
Prime95 5 hours All passed
Swapped out RAM with a GSkill 32GB kit, same issues
BIOS Power Supply Idle - Typical
BIOS Disable Global C-State - Disabled
Any ideas?
