kernel:Kernel panic - not syncing: Fatal exception

W

WebCode

Member
Jun 11, 2012
12
0
21
Hello.

Sorry for my English :).

There was a problem with one server. When the migration on a OpenVZ VPS kernel panic:

Code: 
Message from syslogd@node108 at Jun 11 15:09:01 ...
 kernel:Oops: 0000 [#1] SMP

Message from syslogd@node108 at Jun 11 15:09:01 ...
 kernel:last sysfs file: /sys/devices/virtual/net/lo/operstate

Message from syslogd@node108 at Jun 11 15:09:01 ...
 kernel:Stack:

Message from syslogd@node108 at Jun 11 15:09:01 ...
 kernel:Call Trace:

Message from syslogd@node108 at Jun 11 15:09:01 ...
 kernel:Code: 03 00 00 65 48 8b 04 25 c8 cb 00 00 48 8b 80 38 e0 ff ff a8 08 0f 85 55 fb ff ff 48 81 c4 88 00 00 00 5b 41 5c 41 5d 41 5e 41 5f <c9> c3 66 0f 1f 44 00 00 48 29 d0 48 63 c9 48 89 c2 48 8b 05 60

Message from syslogd@node108 at Jun 11 15:09:01 ...
 kernel:CR2: 0000000000000000

Message from syslogd@node108 at Jun 11 15:09:01 ...
 kernel:Kernel panic - not syncing: Fatal exception

Server Information:

Dell R510

CPU: 2xXeon E5620
RAM: 64Gb (ECC 1333 MHz)
RAID Controller: LSI Logic / Symbios Logic LSI MegaSAS 9260
RAID: 10
HDD: 4x2Tb SATA

mount:

Code: 
/dev/sda1 on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
/dev/mapper/vg0-lvmopenvz on /vz type ext3 (rw)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
/dev/fuse on /etc/pve type fuse (rw,nosuid,nodev,default_permissions,allow_other)
none on /sys/kernel/config type configfs (rw)
beancounter on /proc/vz/beancounter type cgroup (rw,name=beancounter)
container on /proc/vz/container type cgroup (rw,name=container)
fairsched on /proc/vz/fairsched type cgroup (rw,name=fairsched)

Containers dir: /vz (LVM, ext3).

# uname -a
Linux node108 2.6.32-12-pve #1 SMP Tue May 15 06:02:20 CEST 2012 x86_64 GNU/Linux
Click to expand...
The only problem with that server. The problem occurs only when the operation.

Please help :(
 
Last edited:
also post your 'pveversion -v'
 
Please:

# pveversion -v
pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a)
running kernel: 2.6.32-12-pve
proxmox-ve-2.6.32: 2.1-68
pve-kernel-2.6.32-12-pve: 2.6.32-68
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.3-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.8-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.7-2
pve-cluster: 1.0-26
qemu-server: 2.0-39
pve-firmware: 1.0-16
libpve-common-perl: 1.0-27
libpve-access-control: 1.0-21
libpve-storage-perl: 2.0-18
vncterm: 1.0-2
vzctl: 3.0.30-2pve5
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.0-9
ksm-control-daemon: 1.1-1
 
Today, a new server connected to it and got the same problem :(


Message from syslogd@node000 at Jun 12 12:50:59 ... kernel:Oops: 0000 [#1] SMP


Message from syslogd@node000 at Jun 12 12:50:59 ...
kernel:last sysfs file: /sys/devices/virtual/net/lo/operstate


Message from syslogd@node000 at Jun 12 12:50:59 ...
kernel:Stack:


Message from syslogd@node000 at Jun 12 12:50:59 ...
kernel:Call Trace:


Message from syslogd@node000 at Jun 12 12:50:59 ...
kernel:Code: 03 00 00 65 48 8b 04 25 c8 cb 00 00 48 8b 80 38 e0 ff ff a8 08 0f 85 55 fb ff ff 48 81 c4 88 00 00 00 5b 41 5c 41 5d 41 5e 41 5f <c9> c3 66 0f 1f 44 00 00 48 29 d0 48 63 c9 48 89 c2 48 8b 05 60


Message from syslogd@node000 at Jun 12 12:50:59 ...
kernel:CR2: 0000000000000000


Message from syslogd@node000 at Jun 12 12:50:59 ...
kernel:Kernel panic - not syncing: Fatal exception
Click to expand...

# pveversion -v
pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a)
running kernel: 2.6.32-12-pve
proxmox-ve-2.6.32: 2.1-68
pve-kernel-2.6.32-12-pve: 2.6.32-68
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.3-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.8-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.7-2
pve-cluster: 1.0-26
qemu-server: 2.0-39
pve-firmware: 1.0-16
libpve-common-perl: 1.0-27
libpve-access-control: 1.0-21
libpve-storage-perl: 2.0-18
vncterm: 1.0-2
vzctl: 3.0.30-2pve5
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.0-9
ksm-control-daemon: 1.1-1

# uname -a
Linux node000 2.6.32-12-pve #1 SMP Tue May 15 06:02:20 CEST 2012 x86_64 GNU/Linux

# mount
/dev/sda1 on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
/dev/mapper/vg0-lvmopenvz on /vz type ext3 (rw)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
/dev/fuse on /etc/pve type fuse (rw,nosuid,nodev,default_permissions,allow_other)
none on /sys/kernel/config type configfs (rw)
beancounter on /proc/vz/beancounter type cgroup (rw,name=beancounter)
container on /proc/vz/container type cgroup (rw,name=container)
fairsched on /proc/vz/fairsched type cgroup (rw,name=fairsched)

Server Information:

Dell R210

CPU: 1xXeon X3440
RAM: 16Gb (ECC 1333 MHz)
RAID Controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS
RAID: 1
HDD: 2x2Tb SATA


Please help :(
 
I have a server that does not fall to panic: Dell R210II. It differs from only R210 CPU: Xeon E31220.
 
We have 2 servers in the above configurations (dell R210-II - master, R510 - slave). We are migrating container (VPS) from 1 server to another. At the time of starting VPS on the slave server fails with kernel panic.

When we downgrade to kernel: 2.6.32-11-pve problem fixed but we want work with new kernel

What would you advise?
 
Oh no!

Error manifests itself through time. Migrate one VPS - okay, other - kernel panic :(, reboot... Migrate next VPS - okay, other - kernel panic :(.

I'm going to reinstall 10 servers to Proxmox. Migrating to me is very important :(
 
Hello there,

I've got the same problem with the the 2.6.32-12 kernel.

Versions

# uname -a
Linux vm1 2.6.32-12-pve #1 SMP Tue May 15 06:02:20 CEST 2012 x86_64 GNU/Linux
# pveversion -v
pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a)
running kernel: 2.6.32-12-pve
proxmox-ve-2.6.32: 2.1-68
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-12-pve: 2.6.32-68
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.3-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.8-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.7-2
pve-cluster: 1.0-26
qemu-server: 2.0-39
pve-firmware: 1.0-16
libpve-common-perl: 1.0-27
libpve-access-control: 1.0-21
libpve-storage-perl: 2.0-18
vncterm: 1.0-2
vzctl: 3.0.30-2pve5
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.0-9
ksm-control-daemon: 1.1-1
Click to expand...

Hardware is a little bit different:
# lscpu
Architecture: x86_64
CPU op-mode(s): 64-bit
CPU(s): 2
Thread(s) per core: 1
Core(s) per socket: 2
CPU socket(s): 1
NUMA node(s): 1
Vendor ID: AuthenticAMD
CPU family: 15
Model: 67
Stepping: 3
CPU MHz: 3014.283
Virtualization: AMD-V
L1d cache: 64K
L1i cache: 64K
L2 cache: 1024K

# free -m
total used free shared buffers cached
Mem: 3917 607 3310 0 63 319

# lspci
00:00.0 RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1)
00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3)
00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3)
00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1)
00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:08.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 26)
01:0a.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08)
Click to expand...

The Kernel Panic occurs in a different way and breaks the complete system. The Host freezes. Probably this is not directly related to this thread.
Before PVE 2.1 I've used 1.9 without any issue. Everything runs smooth and stable for months.
The hardware difference to before used 1.9 is that I've removed 4 Harddisks and an PCI RAID Controller and replaced the Harddisks by 2x2TB SATA attached to onboard controller. This runs stable as well.

I will now downgrade the kernel to pve-10.
 
Same problem here. During backup of a large VM I got a kernel panic and system freezed.

Is there a solution allready? Or is a downgrade to 10 the only option?

Running kernel 2.6.32-12-pve now.

# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
CPU(s): 8
Thread(s) per core: 1
Core(s) per socket: 4
CPU socket(s): 2
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 23
Stepping: 6
CPU MHz: 2999.893
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 6144K

# lspci
00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1)
00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1)
00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev b1)
00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 6-7 (rev b1)
00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA Engine (rev b1)
00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)
00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)
00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)
00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09)
00:1d.0 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09)
00:1d.1 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09)
00:1d.2 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09)
00:1d.7 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9)
00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09)
00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 09)
01:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01)
01:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01)
02:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01)
02:02.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 (rev 01)
03:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09)
03:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09)
04:02.0 RAID bus controller: Adaptec AIC-9410W SAS (Razor ASIC RAID) (rev 09)
06:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01)
06:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01)
09:00.0 RAID bus controller: Areca Technology Corp. ARC-1680 8 port PCIe/PCI-X to SAS/SATA II RAID Controller
0b:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI ES1000 (rev 02)
 
try latest kernel from pvetest (pve-kernel-2.6.32-13-pve: 2.6.32-72)
 
tom said:
try latest kernel from pvetest (pve-kernel-2.6.32-13-pve: 2.6.32-72)
Click to expand...

Hi,

I have a dell R210 too, and i have the same problem (same sort on kernel panic).

I have a two nodes install, one hp and one dell. I can do online migration from dell to hp but Not hp too dell.
- I have try to boot on -13 -12 -11 and -10 kernel and same problem.
- I have try with formatting in ext3 and not in ext4 and same problem too.

pve-manager: 2.1-12 (pve-manager/2.1/be112d89)
running kernel: 2.6.32-13-pve
proxmox-ve-2.6.32: 2.1-72
pve-kernel-2.6.32-13-pve: 2.6.32-72
pve-kernel-2.6.32-10-pve: 2.6.32-63
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-12-pve: 2.6.32-68
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.3-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.92-2
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.8-1
pve-cluster: 1.0-27
qemu-server: 2.0-45
pve-firmware: 1.0-17
libpve-common-perl: 1.0-28
libpve-access-control: 1.0-24
libpve-storage-perl: 2.0-27
vncterm: 1.0-2
vzctl: 3.0.30-2pve5
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.1-6
ksm-control-daemon: 1.1-1

- controller raid:
01:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)


Any news/news idea about this ? :)

Regards
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back