issuing any pct commands causes setlogsock(): type='unix': path not available at /usr/share/perl5/PV
- Thread starter mathx
- Start date
-
- Tags
- perl unix socket
note that the container command (and container) seem to behave properly, just get this warning.
pveversion:
proxmox-ve: 5.3-1 (running kernel: 4.15.18-12-pve)
pve-manager: 5.3-12 (running version: 5.3-12/5fbbbaf6)
pve-kernel-4.15: 5.3-3
pve-kernel-4.15.18-12-pve: 4.15.18-35
pve-kernel-4.15.18-10-pve: 4.15.18-32
corosync: 2.4.4-pve1
criu: 2.11.1-1~bpo90
glusterfs-client: 3.8.8-1
ksm-control-daemon: 1.2-2
libjs-extjs: 6.0.1-2
libpve-access-control: 5.1-3
libpve-apiclient-perl: 2.0-5
libpve-common-perl: 5.0-48
libpve-guest-common-perl: 2.0-20
libpve-http-server-perl: 2.0-12
libpve-storage-perl: 5.0-39
libqb0: 1.0.3-1~bpo9
lvm2: 2.02.168-pve6
lxc-pve: 3.1.0-3
lxcfs: 3.0.3-pve1
novnc-pve: 1.0.0-3
proxmox-widget-toolkit: 1.0-24
pve-cluster: 5.0-34
pve-container: 2.0-35
pve-docs: 5.3-3
pve-edk2-firmware: 1.20190312-1
pve-firewall: 3.0-18
pve-firmware: 2.0-6
pve-ha-manager: 2.0-8
pve-i18n: 1.0-9
pve-libspice-server1: 0.14.1-2
pve-qemu-kvm: 2.12.1-2
pve-xtermjs: 3.10.1-2
qemu-server: 5.0-47
smartmontools: 6.5+svn4324-1
spiceterm: 3.0-5
vncterm: 1.5-3
zfsutils-linux: 0.7.13-pve1~bpo2
pveversion:
proxmox-ve: 5.3-1 (running kernel: 4.15.18-12-pve)
pve-manager: 5.3-12 (running version: 5.3-12/5fbbbaf6)
pve-kernel-4.15: 5.3-3
pve-kernel-4.15.18-12-pve: 4.15.18-35
pve-kernel-4.15.18-10-pve: 4.15.18-32
corosync: 2.4.4-pve1
criu: 2.11.1-1~bpo90
glusterfs-client: 3.8.8-1
ksm-control-daemon: 1.2-2
libjs-extjs: 6.0.1-2
libpve-access-control: 5.1-3
libpve-apiclient-perl: 2.0-5
libpve-common-perl: 5.0-48
libpve-guest-common-perl: 2.0-20
libpve-http-server-perl: 2.0-12
libpve-storage-perl: 5.0-39
libqb0: 1.0.3-1~bpo9
lvm2: 2.02.168-pve6
lxc-pve: 3.1.0-3
lxcfs: 3.0.3-pve1
novnc-pve: 1.0.0-3
proxmox-widget-toolkit: 1.0-24
pve-cluster: 5.0-34
pve-container: 2.0-35
pve-docs: 5.3-3
pve-edk2-firmware: 1.20190312-1
pve-firewall: 3.0-18
pve-firmware: 2.0-6
pve-ha-manager: 2.0-8
pve-i18n: 1.0-9
pve-libspice-server1: 0.14.1-2
pve-qemu-kvm: 2.12.1-2
pve-xtermjs: 3.10.1-2
qemu-server: 5.0-47
smartmontools: 6.5+svn4324-1
spiceterm: 3.0-5
vncterm: 1.5-3
zfsutils-linux: 0.7.13-pve1~bpo2
hmm - did you by any chance change anything about your (r)syslog or journald configuration?
does '/dev/log' exist? (and is a socket writable by all (could be a symlink pointing somewhere so check with ls -l and follow the chain)
Hope this helps!
does '/dev/log' exist? (and is a socket writable by all (could be a symlink pointing somewhere so check with ls -l and follow the chain)
Hope this helps!
Aha, that was it. I dont specifically remember doing anything to rsyslog, but /dev/log was not there.
This helped:
https://unix.stackexchange.com/questions/317064/how-do-i-restore-dev-log-in-systemdrsyslog-host
had to use the symlink solution at the end after restarting the systemd socket service.
This helped:
https://unix.stackexchange.com/questions/317064/how-do-i-restore-dev-log-in-systemdrsyslog-host
had to use the symlink solution at the end after restarting the systemd socket service.