Hello,
Since updating to the latest version, I have been having issues with Spice. I was on 3.1 plus the first update listed in announcements. Now I am on the latest update listed in announcements.
1) It seems that the arg "addr=0x18" in the vm conf file is an issue with the multi-monitor spice options. I could change it to "addr=0x19" and the dual monitor option would work and maybe 3 monitor option, but not 4 monitor option and if I changed the value to "addr=0x20", I would get the following message.
kvm: -device intel-hda,id=sound5,bus=pci.0,addr=0x20: Property 'intel-hda.addr' doesn't take value '0x20'
2) I cannot connect to a VM via spice. Below is the output of remote-viewer with the --debug option and the other is the . The remote-viewer version is below and I am running Spice in Windows 7 x64. I have attached the contents of the spice file that proxmox generated and a screen shot of the message that the remote-viewer GUI displays.
I looked up the error and that lead me to the following url. This URL does not really help given the way that Spice is initiated with Proxmox.
http://www.spice-space.org/page/SSLConnection
3) Finally, I rebooted a proxmox server server today because I added a network. Now the multimonitor Spice options are missing. I had not installed updates since I rebooted after installing the updates listed in announcements. I checked before the reboot and there were no updates. I am not sure what changed other than me adding a network.
UPDATE:
I have finally been able to test Spice in Linux and I am getting a different error than I am in Windows.
Linux Distro:
openSUSE 12.3 (x86_64)
VERSION = 12.3
CODENAME = Dartmouth
remote-viewer version 0.5.7
virt-viewer version 0.5.7
Related installed software:
libspice-client-glib-2_0-8-0.14-3.4.1.x86_64
libspice-client-gtk-2_0-4-0.14-3.4.1.x86_64
libspice-controller0-0.14-3.4.1.x86_64
libvirt-client-1.0.2-1.10.1.x86_64
virt-viewer-0.5.7-4.1.x86_64
Thank you for your help!
Since updating to the latest version, I have been having issues with Spice. I was on 3.1 plus the first update listed in announcements. Now I am on the latest update listed in announcements.
1) It seems that the arg "addr=0x18" in the vm conf file is an issue with the multi-monitor spice options. I could change it to "addr=0x19" and the dual monitor option would work and maybe 3 monitor option, but not 4 monitor option and if I changed the value to "addr=0x20", I would get the following message.
kvm: -device intel-hda,id=sound5,bus=pci.0,addr=0x20: Property 'intel-hda.addr' doesn't take value '0x20'
2) I cannot connect to a VM via spice. Below is the output of remote-viewer with the --debug option and the other is the . The remote-viewer version is below and I am running Spice in Windows 7 x64. I have attached the contents of the spice file that proxmox generated and a screen shot of the message that the remote-viewer GUI displays.
Code:
remote-viewer version 0.5.7-1.fc19.berrange1375272046
C:\Program Files\VirtViewer\bin>remote-viewer.exe --debug "C:\Users\cmirchandani
\Downloads\spiceproxy"
C:\Program Files\VirtViewer\bin>(remote-viewer.exe:4908): remote-viewer-DEBUG: I
nsert window 0 000000000080C000
(remote-viewer.exe:4908): remote-viewer-DEBUG: fullscreen display 0: 0
(remote-viewer.exe:4908): remote-viewer-DEBUG: Opening display to C:\Users\cmirc
handani\Downloads\spiceproxy
(remote-viewer.exe:4908): remote-viewer-DEBUG: Guest C:\Users\cmirchandani\Downl
oads\spiceproxy has a spice display
(remote-viewer.exe:4908): remote-viewer-DEBUG: After open connection callback fd
=-1
(remote-viewer.exe:4908): remote-viewer-DEBUG: Opening connection to display at
C:\Users\cmirchandani\Downloads\spiceproxy
(remote-viewer.exe:4908): remote-viewer-DEBUG: New spice channel 000000000084FB6
0 SpiceMainChannel 0
(remote-viewer.exe:4908): remote-viewer-DEBUG: Checking full screen auto-conf
(remote-viewer.exe:4908): remote-viewer-DEBUG: auto-conf disabled
(remote-viewer.exe:4908): remote-viewer-DEBUG: notebook show status 000000000080
B150
(remote-viewer.exe:4908): GSpice-WARNING **: loading ca certs from C:\Users\cmir
chandani/.spicec/spice_truststore.pem failed
((null):4908): Spice-Warning **: ../../../spice-common/common/ssl_verify.c:484:o
penssl_verify: ssl: hostname 'pvespiceproxy:52825606:100:vms01::111a230dc2d05033
367bd77a0a60071b50d2b8aa' verification failed
((null):4908): Spice-Warning **: ../../../spice-common/common/ssl_verify.c:487:o
penssl_verify: ssl: subject 'C=US,postalCode=33602,ST=FL,L=Tampa,street=400 Nort
h Tampa Street,street=Suite 1000,O=E Solutions Corporation,OU=Data Center Operat
ions,OU=Hosted by E Solutions Networks, Inc.,OU=Multi-Domain SSL' verification f
ailed
((null):4908): Spice-Warning **: ../../../spice-common/common/ssl_verify.c:489:o
penssl_verify: ssl: verification failed
(remote-viewer.exe:4908): GSpice-WARNING **: main-1:0: SSL_connect: error:000000
01:lib(0):func(0):reason(1)
(remote-viewer.exe:4908): remote-viewer-DEBUG: Disposing window 000000000080C000
(remote-viewer.exe:4908): remote-viewer-DEBUG: Set connect info: (null),(null),(
null),-1,(null),(null),(null),0
I looked up the error and that lead me to the following url. This URL does not really help given the way that Spice is initiated with Proxmox.
http://www.spice-space.org/page/SSLConnection
3) Finally, I rebooted a proxmox server server today because I added a network. Now the multimonitor Spice options are missing. I had not installed updates since I rebooted after installing the updates listed in announcements. I checked before the reboot and there were no updates. I am not sure what changed other than me adding a network.
Code:
root@vms01:~# pveversion -v
proxmox-ve-2.6.32: 3.1-114 (running kernel: 2.6.32-26-pve)
pve-manager: 3.1-24 (running version: 3.1-24/060bd5a6)
pve-kernel-2.6.32-26-pve: 2.6.32-114
pve-kernel-2.6.32-23-pve: 2.6.32-109
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-2
pve-cluster: 3.0-8
qemu-server: 3.1-8
pve-firmware: 1.0-23
libpve-common-perl: 3.0-9
libpve-access-control: 3.0-8
libpve-storage-perl: 3.0-18
pve-libspice-server1: 0.12.4-2
vncterm: 1.1-6
vzctl: 4.0-1pve4
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-17
ksm-control-daemon: 1.1-1
glusterfs-client: 3.4.1-1
UPDATE:
I have finally been able to test Spice in Linux and I am getting a different error than I am in Windows.
Code:
[/COLOR]cmirchandani@tpa01-cmirch-l:~> remote-viewer --debug "/home/cmirchandani/Downloads/spiceproxy"
(remote-viewer:7083): remote-viewer-DEBUG: Insert window 0 0xd71810
(remote-viewer:7083): remote-viewer-DEBUG: fullscreen display 0: 0
(remote-viewer:7083): remote-viewer-DEBUG: Opening display to /home/cmirchandani/Downloads/spiceproxy
(remote-viewer:7083): remote-viewer-DEBUG: Guest /home/cmirchandani/Downloads/spiceproxy has a spice display
remote-viewer: relocation error: remote-viewer: symbol spice_smartcard_manager_get_readers, version SPICEGTK_1 not defined in file libspice-client-glib-2.0.so.8 with link time reference
Linux Distro:
openSUSE 12.3 (x86_64)
VERSION = 12.3
CODENAME = Dartmouth
remote-viewer version 0.5.7
virt-viewer version 0.5.7
Related installed software:
libspice-client-glib-2_0-8-0.14-3.4.1.x86_64
libspice-client-gtk-2_0-4-0.14-3.4.1.x86_64
libspice-controller0-0.14-3.4.1.x86_64
libvirt-client-1.0.2-1.10.1.x86_64
virt-viewer-0.5.7-4.1.x86_64
Thank you for your help!
Attachments
Last edited: