Issues with installing on HP Proliant dl380p

[Chody]

I have a HP Proliant dl380p that I am looking to install proxmox on to start up my home lab, I have it booting into the ISO but when I try to install the os I get below. Anyone know how I can try fix this?

 

[bbgeek17]

the error tells you that the device that is identified as /dev/sdb is unreadable, ie dead/dying.
The screenshot shows that ISO was mapped to /dev/sda, which means your hdd/sdd is probabl /dev/sdb.
You can press alt-f2/f3/etc and then run "lsblk" that should help you identify which device it is.

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[Chody]

the error tells you that the device that is identified as /dev/sdb is unreadable, ie dead/dying.
The screenshot shows that ISO was mapped to /dev/sda, which means your hdd/sdd is probabl /dev/sdb.
You can press alt-f2/f3/etc and then run "lsblk" that should help you identify which device it is.

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

Ran that and got this not really sure what any of it means. For context there is 10 drives in the server at the moment

Update: got proxmox installed (had to reconfig raid) now I get
DMAR: DRHD: handling fault status reg 2
DMAR: [INTR-REMAP] Request device [01:00.0] fault index 0x1c [fault reason 0x26] Blocked an interrupt request due to source-id verification failure