iscsi Issue

[SchoolTechGuy]

I had a 3 node cluster of Proxmox 2.1 connected to an iscsi SAN running great for over a year now with almost 45 VMs, mostly KVM machines. I moved all the VMs off one server and was trying to upgrade from 2.1 to 2.3, then I planned to run the 2.3 to 3.0 update script. Well the 2.1 to 2.3 upgrade failed miserably and not only broke that server, but broke the cluster. I had to rebuild the cluster using the two functioning servers. I used these instructions (http://undefinederror.org/how-to-reset-cluster-configuration-in-proxmox-2/). That seemed to work for the most part, but now I don't see the ISCSI drives in the UI. They are still connected and all 45 VMs are running. I'm afraid to reboot either of the 2 functioning servers. the 'vgs' command shows the iscsi connections.

Any suggestions?

 

[SchoolTechGuy]

I had a 3 node cluster of Proxmox 2.1 connected to an iscsi SAN running great for over a year now with almost 45 VMs, mostly KVM machines. I moved all the VMs off one server and was trying to upgrade from 2.1 to 2.3, then I planned to run the 2.3 to 3.0 update script. Well the 2.1 to 2.3 upgrade failed miserably and not only broke that server, but broke the cluster. I had to rebuild the cluster using the two functioning servers. I used these instructions (http://undefinederror.org/how-to-reset-cluster-configuration-in-proxmox-2/). That seemed to work for the most part, but now I don't see the ISCSI drives in the UI. They are still connected and all 45 VMs are running. I'm afraid to reboot either of the 2 functioning servers. the 'vgs' command shows the iscsi connections.

Any suggestions?

Figured this out. I missed copying the storage.cfg file in the /etc/pve/ directory