Hello.
After running ver. 1.8 for a long time, I decided to install Proxmox 2.1. Almost everything works fine, but the multicasts for clustercommunication are sent on every interface.
In my setup this is a problem, because my cablemodem, e.g., learns the wrong mac-address and stops communicating with the virtual machine.
Is it possible to reduce the multicasts to only one interface? If so, how?
(This would also reduce the networktraffic.)
In the future I would like to setup a second node, so I need the clusterfunction and cannot disable it completely.
My networksetup:
One NIC with tagged VLANs
vmbr0 - eth0.10
vmbr1 - eth0.11
vmbr2 - eth0.12
vmbr3 - eth0.13
Only vmbr0 has got an IP an it is the interface I would use for clustercommunication. The other ones are only for the VMs.
I hope anyone could help me.
Phosen
After running ver. 1.8 for a long time, I decided to install Proxmox 2.1. Almost everything works fine, but the multicasts for clustercommunication are sent on every interface.
In my setup this is a problem, because my cablemodem, e.g., learns the wrong mac-address and stops communicating with the virtual machine.
Is it possible to reduce the multicasts to only one interface? If so, how?
(This would also reduce the networktraffic.)
In the future I would like to setup a second node, so I need the clusterfunction and cannot disable it completely.
My networksetup:
One NIC with tagged VLANs
vmbr0 - eth0.10
vmbr1 - eth0.11
vmbr2 - eth0.12
vmbr3 - eth0.13
Only vmbr0 has got an IP an it is the interface I would use for clustercommunication. The other ones are only for the VMs.
I hope anyone could help me.
Phosen