installing proxmox onto Supermicro X8DTL-iF & blinking cursor

T

tsaenger

Renowned Member
Mar 10, 2010
136
2
83
Hello,
i am trying to install proxmox 1.6 on to a new Supermicro X8DTL-iF Server.
The installation worked fine, but after the reboot i only get a blinking cursor.
Does anybody has an idea what i am doing wrong?

Thanks for help

Tobias
 
Hi,

now i removed my 3ware-controller and installed proxmox onto my onboard sata-HDD.
This worked fine. Now i can access my proxmox.
After that, i pluged in my controller again because i would like to store my VM's there.
But Proxmox doesn't know this RAID-Volume.
What do i have to do?

Thanks for help.

Tobias
 
pls post the controller details.
 
Hi Tom,

i am using:
lsi 9650SE-2LP Controller.

Thanks
Tobias

[EDIT]
further information:
Code: 
Controller Details (Controller ID 0)
  Model     9650SE-2LP
  Serial #     L325030B0171534
  Firmware     FE9X 4.10.00.007
  Driver     2.26.02.012
  BIOS     BE9X 4.08.00.002
  Boot Loader     BL9X 3.08.00.001
  Available Memory     112 MB
  Bus Type     PCIe
  Bus Width     1 lane
  Bus Speed     2.5 Gbps/lane
  Controller Phys     4
  Connections     2 of 2
  Drives     2 of 2
  Units     1 of 2
  Active Drives     2 of 2
  Active Units     1 of 2
  Max Drives per Unit     2

and more:

Code: 
vm:/dev# fdisk -l

Disk /dev/sda: 499.9 GB, 499989348352 bytes
255 heads, 63 sectors/track, 60786 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

   Device Boot      Start         End      Blocks   Id  System

Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *           1          66      524288   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sdb2              66        9729    77623872   8e  Linux LVM

Disk /dev/dm-0: 7516 MB, 7516192768 bytes
255 heads, 63 sectors/track, 913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

Disk /dev/dm-0 doesn't contain a valid partition table

Disk /dev/dm-1: 19.8 GB, 19864223744 bytes
255 heads, 63 sectors/track, 2415 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

Disk /dev/dm-1 doesn't contain a valid partition table

Disk /dev/dm-2: 47.8 GB, 47815065600 bytes
255 heads, 63 sectors/track, 5813 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

Disk /dev/dm-2 doesn't contain a valid partition table

/dev/sda looks like my raid-System
 
Last edited:
You must log in or register to reply here.
Top Bottom