HP Mellanox card visible, but not active

I

inf3rno

New Member
Jan 21, 2023
7
0
1
Hi!
I have a dual port QSFP+ HP Mellanox card. I can see both ports, but they are not active. Any idea how to make them active?

mstflint -d 0a:00.0 q
Code: 
Image type: FS2
FW Version: 2.42.5052
FW Release Date: 7.7.2019
Product Version: 02.42.50.52
Rom Info: version_id=8025 type=CLP
type=UEFI version=14.11.49 cpu=AMD64
type=PXE version=3.4.754
Device ID: 4103
Description: Node Port1 Port2 Sys image
GUIDs: ... ... ... ...
MACs: ... ...
VSD:
PSID: HP_1370110017

dmesg | grep mlx4
Code: 
[    1.092182] mlx4_core: Mellanox ConnectX core driver v4.0-0
[    1.092213] mlx4_core: Initializing 0000:0a:00.0
[    9.512279] mlx4_core 0000:0a:00.0: DMFS high rate steer mode is: disabled performance optimized steering
[    9.512482] mlx4_core 0000:0a:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:03.1 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[    9.613786] mlx4_en: Mellanox ConnectX HCA Ethernet driver v4.0-0
[    9.613902] mlx4_en 0000:0a:00.0: Activating port:1
[    9.615806] mlx4_en: 0000:0a:00.0: Port 1: Using 12 TX rings
[    9.615814] mlx4_en: 0000:0a:00.0: Port 1: Using 8 RX rings
[    9.616000] mlx4_en: 0000:0a:00.0: Port 1: Initializing port
[    9.616267] mlx4_en 0000:0a:00.0: registered PHC clock
[    9.617047] mlx4_core 0000:0a:00.0 enp10s0: renamed from eth0
[    9.617899] <mlx4_ib> mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v4.0-0
[    9.639778] <mlx4_ib> mlx4_ib_add: counter index 2 for port 1 allocated 1
[    9.639783] <mlx4_ib> mlx4_ib_add: counter index 1 for port 2 allocated 0
[   14.168134] mlx4_en 0000:0a:00.0: removed PHC
[   14.170863] mlx4_en 0000:0a:00.0: Activating port:2
[   14.172633] mlx4_en: 0000:0a:00.0: Port 2: Using 12 TX rings
[   14.172639] mlx4_en: 0000:0a:00.0: Port 2: Using 8 RX rings
[   14.172828] mlx4_en: 0000:0a:00.0: Port 2: Initializing port
[   14.173096] mlx4_en 0000:0a:00.0: registered PHC clock
[   14.173573] <mlx4_ib> mlx4_ib_add: counter index 0 for port 1 allocated 0
[   14.173577] <mlx4_ib> mlx4_ib_add: counter index 3 for port 2 allocated 1
[   14.174692] mlx4_core 0000:0a:00.0 enp10s0d1: renamed from eth0
[   18.656484] mlx4_en 0000:0a:00.0: removed PHC
[   18.659291] mlx4_en 0000:0a:00.0: Activating port:1
[   18.660841] mlx4_en: 0000:0a:00.0: Port 1: Using 12 TX rings
[   18.660845] mlx4_en: 0000:0a:00.0: Port 1: Using 8 RX rings
[   18.661066] mlx4_en: 0000:0a:00.0: Port 1: Initializing port
[   18.666007] mlx4_en 0000:0a:00.0: registered PHC clock
[   18.666577] <mlx4_ib> mlx4_ib_add: counter index 4 for port 1 allocated 1
[   18.666581] <mlx4_ib> mlx4_ib_add: counter index 1 for port 2 allocated 0
[   18.667812] mlx4_core 0000:0a:00.0 enp10s0: renamed from eth0
[   22.873870] mlx4_en 0000:0a:00.0: removed PHC
[   22.876841] mlx4_en 0000:0a:00.0: Activating port:2
[   22.878478] mlx4_en: 0000:0a:00.0: Port 2: Using 12 TX rings
[   22.878483] mlx4_en: 0000:0a:00.0: Port 2: Using 8 RX rings
[   22.878669] mlx4_en: 0000:0a:00.0: Port 2: Initializing port
[   22.880373] mlx4_en 0000:0a:00.0: registered PHC clock
[   22.880904] <mlx4_ib> mlx4_ib_add: counter index 0 for port 1 allocated 0
[   22.880909] <mlx4_ib> mlx4_ib_add: counter index 5 for port 2 allocated 1
[   22.882058] mlx4_core 0000:0a:00.0 enp10s0d1: renamed from eth0
[   27.698321] mlx4_en 0000:0a:00.0: removed PHC
[   27.701367] mlx4_en 0000:0a:00.0: Activating port:1
[   27.702978] mlx4_en: 0000:0a:00.0: Port 1: Using 12 TX rings
[   27.702983] mlx4_en: 0000:0a:00.0: Port 1: Using 8 RX rings
[   27.703159] mlx4_en: 0000:0a:00.0: Port 1: Initializing port
[   27.705446] mlx4_en 0000:0a:00.0: registered PHC clock
[   27.705955] <mlx4_ib> mlx4_ib_add: counter index 6 for port 1 allocated 1
[   27.705961] <mlx4_ib> mlx4_ib_add: counter index 1 for port 2 allocated 0
[   27.707053] mlx4_core 0000:0a:00.0 enp10s0: renamed from eth0
[   32.658505] mlx4_en 0000:0a:00.0: removed PHC
[   32.661345] mlx4_en 0000:0a:00.0: Activating port:2
[   32.662944] mlx4_en: 0000:0a:00.0: Port 2: Using 12 TX rings
[   32.662948] mlx4_en: 0000:0a:00.0: Port 2: Using 8 RX rings
[   32.663136] mlx4_en: 0000:0a:00.0: Port 2: Initializing port
[   32.665227] mlx4_en 0000:0a:00.0: registered PHC clock
[   32.665701] <mlx4_ib> mlx4_ib_add: counter index 0 for port 1 allocated 0
[   32.665705] <mlx4_ib> mlx4_ib_add: counter index 7 for port 2 allocated 1
[   32.666797] mlx4_core 0000:0a:00.0 enp10s0d1: renamed from eth0
[   37.282530] mlx4_en 0000:0a:00.0: removed PHC
[   37.285178] mlx4_en 0000:0a:00.0: Activating port:1
[   37.286706] mlx4_en: 0000:0a:00.0: Port 1: Using 12 TX rings
[   37.286712] mlx4_en: 0000:0a:00.0: Port 1: Using 8 RX rings
[   37.286937] mlx4_en: 0000:0a:00.0: Port 1: Initializing port
[   37.290885] mlx4_en 0000:0a:00.0: registered PHC clock
[   37.291460] <mlx4_ib> mlx4_ib_add: counter index 8 for port 1 allocated 1
[   37.291464] <mlx4_ib> mlx4_ib_add: counter index 1 for port 2 allocated 0
[   37.292595] mlx4_core 0000:0a:00.0 enp10s0: renamed from eth0
[   42.174517] mlx4_en 0000:0a:00.0: removed PHC
[   42.177403] mlx4_en 0000:0a:00.0: Activating port:2
[   42.179000] mlx4_en: 0000:0a:00.0: Port 2: Using 12 TX rings
[   42.179004] mlx4_en: 0000:0a:00.0: Port 2: Using 8 RX rings
[   42.179192] mlx4_en: 0000:0a:00.0: Port 2: Initializing port
[   42.180958] mlx4_en 0000:0a:00.0: registered PHC clock
[   42.181436] <mlx4_ib> mlx4_ib_add: counter index 0 for port 1 allocated 0
[   42.181443] <mlx4_ib> mlx4_ib_add: counter index 9 for port 2 allocated 1
[   42.182582] mlx4_core 0000:0a:00.0 enp10s0d1: renamed from eth0
[   47.134568] mlx4_en 0000:0a:00.0: removed PHC
[   47.137696] mlx4_en 0000:0a:00.0: Activating port:1
[   47.139301] mlx4_en: 0000:0a:00.0: Port 1: Using 12 TX rings
[   47.139306] mlx4_en: 0000:0a:00.0: Port 1: Using 8 RX rings
[   47.139481] mlx4_en: 0000:0a:00.0: Port 1: Initializing port
[   47.141685] mlx4_en 0000:0a:00.0: registered PHC clock
[   47.142161] <mlx4_ib> mlx4_ib_add: counter index 10 for port 1 allocated 1
[   47.142166] <mlx4_ib> mlx4_ib_add: counter index 1 for port 2 allocated 0
[   47.143364] mlx4_core 0000:0a:00.0 enp10s0: renamed from eth0
 
Code: 
auto lo
iface lo inet loopback

iface enp9s0 inet manual

iface wlp8s0 inet manual

auto enp10s0
iface enp10s0 inet static
        address 192.168.2.124/24

auto enp10s0d1
iface enp10s0d1 inet static
        address 192.168.2.125/24

auto vmbr0
iface vmbr0 inet static
        address 192.168.1.124/24
        gateway 192.168.1.1
        bridge-ports enp9s0
        bridge-stp off
        bridge-fd 0

auto vmbr1
iface vmbr1 inet static
        address 192.168.2.124/24
        bridge-ports ensp10s0
        bridge-stp off
        bridge-fd 0

auto vmbr2
iface vmbr2 inet static
        address 192.168.2.125/24
        bridge-ports ensp10s0d1
        bridge-stp off
        bridge-fd 0

Code: 
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enp9s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmbr0 state UP group default qlen 1000
    link/ether a8:xx:xx:xx:xx:ed brd ff:ff:ff:ff:ff:ff
4: wlp8s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 98:xx:xx:xx:xx:d3 brd ff:ff:ff:ff:ff:ff
5: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether a8:xx:xx:xx:xx:ed brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.124/24 scope global vmbr0
       valid_lft forever preferred_lft forever
    inet6 fe80::xxxx:xxxx:xxxx:xxxx/64 scope link
       valid_lft forever preferred_lft forever
6: vmbr1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
    link/ether 52:xx:xx:xx:xx:05 brd ff:ff:ff:ff:ff:ff
    inet 192.168.2.124/24 scope global vmbr1
       valid_lft forever preferred_lft forever
7: vmbr2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
    link/ether a2:xx:xx:xx:xx:61 brd ff:ff:ff:ff:ff:ff
    inet 192.168.2.125/24 scope global vmbr2
       valid_lft forever preferred_lft forever
204: enp10s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 94:xx:xx:xx:xx:31 brd ff:ff:ff:ff:ff:ff
205: enp10s0d1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 94:xx:xx:xx:xx:32 brd ff:ff:ff:ff:ff:ff
 
You must log in or register to reply here.
Top Bottom