Hey everyone,
Been running Proxmox for a little bit now and have a ZFS pool with 10 hard drives in it. My old LSI card died and I replaced it with an LSI 9206-16e and something strange is going on. When I reboot the server I get an error stating "Allocation Failure during SCSI Scanning". The drives do not show up when I run lsblk, but if I use LSIUtil, the card does show all of the drives. A dmesg | grep mpt looks good and looks like this:
[/ICODE]
Kinda grinding my head against the wall since I do not understand why the card would see the drives and enclosure and mpt isn't reporting anything but lsscsi reports no drives. Any help would be appreciated!
Been running Proxmox for a little bit now and have a ZFS pool with 10 hard drives in it. My old LSI card died and I replaced it with an LSI 9206-16e and something strange is going on. When I reboot the server I get an error stating "Allocation Failure during SCSI Scanning". The drives do not show up when I run lsblk, but if I use LSIUtil, the card does show all of the drives. A dmesg | grep mpt looks good and looks like this:
Code:
[ 0.008436] Device empty
[ 1.995532] mpt3sas version 38.100.00.00 loaded
[ 1.999494] mpt3sas 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.999955] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (82278064 kB)
[ 2.054611] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
[ 2.054622] mpt2sas_cm0: MSI-X vectors supported: 1
[ 2.054627] mpt2sas_cm0: 0 1
[ 2.054709] mpt2sas_cm0: High IOPs queues : disabled
[ 2.054711] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 43
[ 2.054713] mpt2sas_cm0: iomem(0x0000000092280000), mapped(0x00000000227fe05e), size(16384)
[ 2.054718] mpt2sas_cm0: ioport(0x0000000000003000), size(256)
[ 2.109707] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
[ 2.137092] mpt2sas_cm0: scatter gather: sge_in_main_msg(1), sge_per_chain(9), sge_per_io(128), chains_per_io(15)
[ 2.137613] mpt2sas_cm0: request pool(0x000000005dd9f62c) - dma(0x112000000): depth(30127), frame_size(128), pool_size(3765 kB)
[ 3.135627] mpt2sas_cm0: sense pool(0x0000000086ff214a) - dma(0x117400000): depth(29868), element_size(96), pool_size (2800 kB)
[ 3.135632] mpt2sas_cm0: sense pool(0x0000000086ff214a)- dma(0x117400000): depth(29868),element_size(96), pool_size(0 kB)
[ 3.136225] mpt2sas_cm0: reply pool(0x00000000eafe8403) - dma(0x117800000): depth(30191), frame_size(128), pool_size(3773 kB)
[ 3.136252] mpt2sas_cm0: config page(0x00000000681e8936) - dma(0x116f33000): size(512)
[ 3.136254] mpt2sas_cm0: Allocated physical memory: size(66932 kB)
[ 3.136255] mpt2sas_cm0: Current Controller Queue Depth(29865),Max Controller Queue Depth(32455)
[ 3.136256] mpt2sas_cm0: Scatter Gather Elements per IO(128)
[ 3.180218] mpt2sas_cm0: overriding NVDATA EEDPTagMode setting
[ 3.180654] mpt2sas_cm0: LSISAS2116: FWVersion(20.00.07.00), ChipRevision(0x02), BiosVersion(07.11.00.00)
[ 3.180656] mpt2sas_cm0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[ 3.182371] mpt2sas_cm0: sending port enable !!
[ 4.880198] mpt2sas_cm0: hba_port entry: 0000000056bf8593, port: 255 is added to hba_port list
[ 4.883511] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x500062b2004a7c40), phys(16)
[ 4.893254] mpt2sas_cm0: expander_add: handle(0x0011), parent(0x0001), sas_addr(0x500604806828e13f), phys(25)
[ 4.900943] Modules linked in: hid_generic dm_thin_pool usbkbd usbmouse dm_persistent_data dm_bio_prison dm_bufio libcrc32c usbhid hid crc32_pclmul xhci_pci megaraid_sas xhci_pci_renesas lpc_ich tg3 ehci_pci ehci_hcd xhci_hcd mpt3sas raid_class pata_acpi scsi_transport_sas wmi
[ 4.900970] Workqueue: fw_event_mpt2sas0 _firmware_event_work [mpt3sas]
[ 4.901043] ? scsih_target_alloc+0x10d/0x330 [mpt3sas]
[ 4.901078] mpt3sas_transport_port_add+0x313/0x4a0 [mpt3sas]
[ 4.901090] _scsih_add_device.constprop.0+0x3fa/0x510 [mpt3sas]
[ 4.901102] _firmware_event_work+0xdff/0x1f60 [mpt3sas]
[ 5.233386] mpt2sas_cm0: expander_add: handle(0x001c), parent(0x0002), sas_addr(0x500604806829733f), phys(25)
[ 10.478090] mpt2sas_cm0: port enable: SUCCESS
[ 813.675762] mptctl: Registered with Fusion MPT base driver
[ 813.675762] mptctl: /dev/mptctl @ (major,minor=10,220)Kinda grinding my head against the wall since I do not understand why the card would see the drives and enclosure and mpt isn't reporting anything but lsscsi reports no drives. Any help would be appreciated!
