Help for setting up network on dedicated server

[Guillaume Soucy]

Hi,

I have an dedicated server with Proxmox on it but I'm unable to setup network. I can access the server using his main IP but I'm unable to use additional IP (I have ordered) with my VMs.

This is my /etc/network/interfaces file content:

auto lo
iface lo inet loopback

iface eno3 inet manual

iface eno4 inet manual

auto vmbr1
iface vmbr1 inet manual
bridge_ports dummy0
bridge_stp off
bridge_fd 0

auto vmbr0
iface vmbr0 inet static
address 54.39.49.187
netmask 255.255.0.0
gateway 54.39.49.254
bridge_ports eno3
bridge_stp off
bridge_fd 0

auto vmbr2
iface vmbr2 inet static
address 54.39.49.187
netmask 255.255.255.255
bridge_ports none
bridge_stp off
bridge_fd 0
up ip route add 198.27.122.255/32 dev vmbr2
down ip route del 198.27.122.255/32 dev vmbr2



Thanks a lot for helping.


Guillaume

 

[Guillaume Soucy]

Also when doing this: service networking restart

I got that:

Job for networking.service failed because the control process exited with error code.
See "systemctl status networking.service" and "journalctl -xe" for details.

 

[kotakomputer]

You don't need to create vmbr2.

Delete this part:

auto vmbr2
iface vmbr2 inet static
address 54.39.49.187
netmask 255.255.255.255
bridge_ports none
bridge_stp off
bridge_fd 0
up ip route add 198.27.122.255/32 dev vmbr2
down ip route del 198.27.122.255/32 dev vmbr2

Just inside your VM:
- enter IP 54.39.49.187/255.255.255.255 and gateway 54.39.49.254
- set to vmbr0

 

[Guillaume Soucy]

Ok I will try.

Thanks!

 

[DerDanilo]

Did you solve your issue?