Thanks for such clear instructions.
First time seeing this, but glad I ran across it in case I need to do this again. Thanks!
First time seeing this, but glad I ran across it in case I need to do this again. Thanks!
[GUIDE] Install Home Assistant OS in a VM
- Thread starter dondizzurp
- Start date
I created an account here just to say thank you to dondizzurp. Awesome guide, my friend! Everything worked flawlessly on the first try.
I keep getting this error when trying to start, I've followed all directions very carefully. Anyone have any ideas? Thanks:
kvm: -readconfig /usr/share/qemu-server/pve-q35-4.0.cfg: Duplicate ID 'pci.1' for deviceTASK ERROR: start failed: QEMU exited with code 1@dondizzurp
Perfect. Thank you for sharing! Quick question. The EFI disk, can be removed once the new hard disk is added? So far up and running.
Perfect. Thank you for sharing! Quick question. The EFI disk, can be removed once the new hard disk is added? So far up and running.
This was perfect, thank you! I couldn't get my image to boot because I didn't do any of the steps under the 'System' portion while trying it by myself. Thank you thank you!
Did you enable the QEMU Guest Agent setting in the Option configuration of your VM ?
I saw your post and enabled mine before I checked whether it had data or not -- it did after, so maybe ?
Wonderful! Yes, it's helped. I prefer known the process as well!
This is my first Proxmox import and first exposure to HA - I appreciate you removing some of the mystery.
I had missed the boot option - despite having read your notes. When I saw PXE fail I knew immediately
I've not encountered that error - but here are 2 things you can try to gather more info - it's not a fix, but path to troubleshooting:
How many virtual machines do you have?
Can you get to a cli/terminal as root:
1) run 'lspci' and see if there are indeed duplicate devices (left column)
Then check the contents of the files in :
/usr/share/qemu-server - starting ith the listed pve-q35-4.0.cfg
2) Is there more than one [device "pci.1"] entry. Or similarly, the info in that device section repeated elsewhere?
For example - this is the section in my config - and it's not repeated in either way:
Code:
[device "pci.1"]
driver = "pci-bridge"
bus = "pcidmi"
addr = "2.0"
chassis_nr = "2"Hi All,
Someone has resolved this error ?
no success after deleting all pci.* (if you delete the 1, the 2nd appear as duplicate etc...) in /usr/share/qemu-server/pve-q35-4.0.cfg
for the command "lspci" :
Code:
root@rasp5:~# lspci
0000:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)
0000:01:00.0 Non-Volatile memory controller: MAXIO Technology (Hangzhou) Ltd. NVMe SSD Controller MAP1202 (rev 01)
0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)
0001:01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South BridgeThx
Hi,
Having exactly the same problem I started some "newbie" investigations...
I have seen that there is a second file which is almost identical "pve-q35.cfg" which has basically the same data as "pve-q35-4.0.cfg". Could this be what is generating the duplication error? And what would happen if one cleared out all the data in "pve-q35.cfg"??
Good job sir! I couldn't figure out how to handle the drive on the VM, but this explained it perfectly.
Stopping in to say thank you! This is exactly what I was looking for. I know the helper scripts exist, but I find the "DIY" method helps to understand what's going on. I wish Home Assistant would just include these steps in their documentation. Well done!
Thank you for this explanation. Installed HA on Proxmox 3 years ago and found sufficient tips at the time.
Now I ended up following some recommendations on mounting disks and importing files etc.
It became a mess, so I reinstalled Proxmox and followed these instructions before making any changes.
Now I ended up following some recommendations on mounting disks and importing files etc.
It became a mess, so I reinstalled Proxmox and followed these instructions before making any changes.