Heya,
I have an hp dl380p g8 running proxmox 6.1-7
I'm trying to pass through a quadro 600 (also tried 950 but same results, everything below is relating to the quadro) but I keep getting the error in the title, no matter what I try.
the gpu and its audio device are in the same group but separate from everything else
this is currently my grub line:
i need insecure interrupts
and added the following according to the proxmox guide
my gpu audio device gives this issue but even the solutions for it have not worked:
i have tried using bios and uefi guests but that doesnt change anything
i even updated the bios to a recent version (2015 -> 2019) since there was a known issue
this doc shows the issue and the resolution, but the res for gpus (update the bios) did not work, i would try the one for nics but its confusing to me
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-c04781229+
guides i've followed:
https://pve.proxmox.com/wiki/Pci_passthrough
https://www.unrelatedshit.com/2016/02/19/enable-pci-passthrough-for-qemukvm/
https://www.jimmdenton.com/gpu-offloading-openstack/
https://forums.unraid.net/topic/75869-solved-issue-getting-gpu-passthrough-working-on-new-server/
ask me for any info and i will do what i can to get it.
I'm not great with Linux so there's a good chance i did something wrong
update: i have an old ati card that i was able to "passthrough" but i was unable to use it on kubuntu 20.04 (detected as pci device but not listed under graphics), there was no monitor output when set as primary gpu, and windows did not have drivers for it so i was unable to test there, i have a rx 470 on the way, should be here either friday or next monday
edit: fixed spacing
I have an hp dl380p g8 running proxmox 6.1-7
cpu: 2x xeon e5 2620
ram: 94GB ecc
drives:
os: sata ssd 512gb
data: 1.2tb sas drive
ram: 94GB ecc
drives:
os: sata ssd 512gb
data: 1.2tb sas drive
I'm trying to pass through a quadro 600 (also tried 950 but same results, everything below is relating to the quadro) but I keep getting the error in the title, no matter what I try.
the gpu and its audio device are in the same group but separate from everything else
Code:
IOMMU Group 23:
0a:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108GL [Quadro 600] [10de:0df8] (rev a1)
0a:00.1 Audio device [0403]: NVIDIA Corporation GF108 High Definition Audio Controller [10de:0bea] (rev a1)
this is currently my grub line:
Code:
GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on iommu=pt pcie_acs_override=10de:0df8,10de:0bea vfio-pci.ids=10de:0df8,10de:0bea"
i need insecure interrupts
Code:
root@proxmox:~# dmesg | grep 'remapping'
[ 0.912539] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.912540] x2apic: IRQ remapping doesn't support X2APIC mode
Code:
root@proxmox:~# cat /etc/modprobe.d/iommu_unsafe_interrupts.conf
options vfio_iommu_type1 allow_unsafe_interrupts=1
my gpu audio device gives this issue but even the solutions for it have not worked:
Code:
[ 1176.469918] vfio-pci 0000:0a:00.1: DMAR: Device is ineligible for IOMMU domain attach due to platform RMRR requirement. Contact your platform vendor.
i have tried using bios and uefi guests but that doesnt change anything
i even updated the bios to a recent version (2015 -> 2019) since there was a known issue
this doc shows the issue and the resolution, but the res for gpus (update the bios) did not work, i would try the one for nics but its confusing to me
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-c04781229+
guides i've followed:
https://pve.proxmox.com/wiki/Pci_passthrough
https://www.unrelatedshit.com/2016/02/19/enable-pci-passthrough-for-qemukvm/
https://www.jimmdenton.com/gpu-offloading-openstack/
https://forums.unraid.net/topic/75869-solved-issue-getting-gpu-passthrough-working-on-new-server/
ask me for any info and i will do what i can to get it.
I'm not great with Linux so there's a good chance i did something wrong
update: i have an old ati card that i was able to "passthrough" but i was unable to use it on kubuntu 20.04 (detected as pci device but not listed under graphics), there was no monitor output when set as primary gpu, and windows did not have drivers for it so i was unable to test there, i have a rx 470 on the way, should be here either friday or next monday
edit: fixed spacing
Last edited: