Fresh install ZFS (RAID1), can't boot after reboot

[atec666]

Hello,

i've just installing Proxomox 5.3 on HP core i5 3470 16 Go , 2 x HDD 500 Go
Choosing ZFS RAID1 for this two drive, in order to have RAID 1 (i hope that ZFS , in RAID1 mode will not eat all my 16 Go memory ...).
Installing is ok, but when the computer reboot .... tadadadddadaa : PXE boot only !

Bios setup is legacy , when installing with one drive /dev/sda ... everything is ok.

Do you have an idea ?

(i'm newb with zfs, but skilled with mdadm ... and is working perfectly with pve 5.3 , from a debian vanilla install)

 

[atec666]

plop,

no idea ?

 

[atec666]

Trying to install on HP pro 3500 with uefi disabled , it seems proxmox install can't install grub on disk !
partition scheme ... with ZFS RADI1 install :
1MB biosgrub
539 MB B
499.6GB zfs ...

on sda and sdb but cant' boot ...

 

[MikeP]

I have a similar issue:
https://forum.proxmox.com/threads/intel-nuc-issues.52314/

 

[Elehob]

Sorry for bumping an old thread but were you able to figure this out? I’m running into this issue with Proxmox 7