[SOLVED] Failed to run lxc.hook.pre-start

S

saures

New Member
Nov 24, 2016
10
1
1
35
Hello,
after a reboot of Proxmox i am not able to boot a lxc Debian installation anymore.
It is stored in an ZFS-Container. Except from snaphots i did nothing with the storage. ZFS rollback doesn't help.
Where should i look for the cause? Do you think it is Proxmox or something in the container?

thank you in advance!

lxc-start -n 101 -F -lDEBUG -o lxc-101.log:
Code: 
      lxc-start 20160225210321.565 INFO     lxc_start_ui - tools/lxc_start.c:main:275 - using rcfile /var/lib/lxc/101/config
      lxc-start 20160225210321.565 WARN     lxc_confile - confile.c:config_pivotdir:1910 - lxc.pivotdir is ignored.  It will soon become an error.
      lxc-start 20160225210321.578 WARN     lxc_start - start.c:lxc_check_inherited:238 - Inherited fd: 3.
      lxc-start 20160225210321.578 INFO     lxc_lsm - lsm/lsm.c:lsm_init:48 - LSM security driver AppArmor
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:402 - processing: .reject_force_umount  # comment this to allow umount -f;  not recommended.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:567 - Adding native rule for reject_force_umount action 0.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:do_resolve_add_rule:251 - Setting Seccomp rule to reject force umounts.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:570 - Adding compat rule for reject_force_umount action 0.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:do_resolve_add_rule:251 - Setting Seccomp rule to reject force umounts.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:402 - processing: .[all].
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:402 - processing: .kexec_load errno 1.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:567 - Adding native rule for kexec_load action 327681.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:570 - Adding compat rule for kexec_load action 327681.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:402 - processing: .open_by_handle_at errno 1.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:567 - Adding native rule for open_by_handle_at action 327681.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:570 - Adding compat rule for open_by_handle_at action 327681.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:402 - processing: .init_module errno 1.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:567 - Adding native rule for init_module action 327681.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:570 - Adding compat rule for init_module action 327681.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:402 - processing: .finit_module errno 1.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:567 - Adding native rule for finit_module action 327681.
      lxc-start 20160225210321.580 WARN     lxc_seccomp - seccomp.c:do_resolve_add_rule:270 - Seccomp: got negative for syscall: -10085: finit_module.
      lxc-start 20160225210321.580 WARN     lxc_seccomp - seccomp.c:do_resolve_add_rule:271 - This syscall will NOT be blacklisted.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:570 - Adding compat rule for finit_module action 327681.
      lxc-start 20160225210321.580 WARN     lxc_seccomp - seccomp.c:do_resolve_add_rule:270 - Seccomp: got negative for syscall: -10085: finit_module.
      lxc-start 20160225210321.580 WARN     lxc_seccomp - seccomp.c:do_resolve_add_rule:271 - This syscall will NOT be blacklisted.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:402 - processing: .delete_module errno 1.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:567 - Adding native rule for delete_module action 327681.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:570 - Adding compat rule for delete_module action 327681.
      lxc-start 20160225210321.580 INFO     lxc_seccomp - seccomp.c:parse_config_v2:580 - Merging in the compat Seccomp ctx into the main one.
      lxc-start 20160225210321.581 INFO     lxc_conf - conf.c:run_script_argv:424 - Executing script "/usr/share/lxc/hooks/lxc-pve-prestart-hook" for container "101", config section "lxc".
      lxc-start 20160225210321.331 ERROR    lxc_conf - conf.c:run_buffer:405 - Script exited with status 2.
      lxc-start 20160225210321.331 ERROR    lxc_start - start.c:lxc_init:450 - Failed to run lxc.hook.pre-start for container "101".
      lxc-start 20160225210321.331 ERROR    lxc_start - start.c:__lxc_start:1321 - Failed to initialize container "101".
      lxc-start 20160225210321.331 ERROR    lxc_start_ui - tools/lxc_start.c:main:366 - The container failed to start.
      lxc-start 20160225210321.331 ERROR    lxc_start_ui - tools/lxc_start.c:main:370 - Additional information can be obtained by setting the --logfile and --logpriority options.

pveversion -v
Code: 
proxmox-ve: 4.4-82 (running kernel: 4.4.40-1-pve)
pve-manager: 4.4-12 (running version: 4.4-12/e71b7a74)
pve-kernel-4.4.35-1-pve: 4.4.35-77
pve-kernel-4.4.35-2-pve: 4.4.35-79
pve-kernel-4.4.40-1-pve: 4.4.40-82
lvm2: 2.02.116-pve3
corosync-pve: 2.4.2-1
libqb0: 1.0-1
pve-cluster: 4.0-48
qemu-server: 4.0-109
pve-firmware: 1.1-10
libpve-common-perl: 4.0-92
libpve-access-control: 4.0-23
libpve-storage-perl: 4.0-76
pve-libspice-server1: 0.12.8-2
vncterm: 1.3-1
pve-docs: 4.4-3
pve-qemu-kvm: 2.7.1-4
pve-container: 1.0-94
pve-firewall: 2.0-33
pve-ha-manager: 1.0-40
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u3
lxc-pve: 2.0.7-3
lxcfs: 2.0.6-pve1
criu: 1.6.0-1
novnc-pve: 0.5-8
smartmontools: 6.5+svn4324-1~pve80
zfsutils: 0.6.5.9-pve15~bpo80

pct config 101:
Code: 
arch: amd64
cores: 3
hostname: yyy
memory: 512
mp0: /XXX,mp=/xxx
mp1: /XXX,mp=/xxx
net1: name=eth1,bridge=vmbr0,hwaddr=XXX,ip=XXX/24,tag=105,type=veth
net2: name=net2,bridge=vmbr0,gw=192.168.39.1,hwaddr=XXX,ip=XXX24,tag=202,type=veth
onboot: 0
ostype: debian
rootfs: zContainer:subvol-101-disk-1,size=5G
swap: 512
 
  • Like
Reactions: Psilospiral
Thank you for your Answer!

One day later i tried to get you your requestet answer. Out of nothing it works again. I don't get it. I tried two reboots of Proxmox yesterday.
 
Okay, here it is again:

Code: 
lxc-start -n 101 -F -lDEBUG -o lxc-101.log
storage does not support content type 'none'
unable to detect OS distribution
lxc-start: conf.c: run_buffer: 405 Script exited with status 2.
lxc-start: start.c: lxc_init: 450 Failed to run lxc.hook.pre-start for container "101".
lxc-start: start.c: __lxc_start: 1321 Failed to initialize container "101".
lxc-start: tools/lxc_start.c: main: 366 The container failed to start.
lxc-start: tools/lxc_start.c: main: 370 Additional information can be obtained by setting the --logfile and --logpriority options.
 
can you post your /etc/pve/storage.cfg ?
 
Hello Dominik,

Code: 
ir: local
    disable
    path /var/lib/vz
    shared 0
    content vztmpl,iso
    maxfiles 0

lvmthin: local-lvm
    disable
    vgname pve
    thinpool data
    content none

zfspool: zContainer
    pool naspool/container
    content rootdir
    sparse 0
    mkdir 0

zfspool: zDiskImage
    pool naspool/diskimage
    content images
    sparse 0
    mkdir 0

dir: folderTemplates
    path /naspool/templates
    shared 0
    content vztmpl,iso
    maxfiles 5
    mkdir 0

dir: folderContBackup
    path /naspool/contBackup
    shared 0
    content backup
    maxfiles 5
    mkdir 0

As you see, i use ZFS for the container storage.

thank you in Advance!
Greetings!
 
Last edited:
according to the config this is a debian container, does the file /etc/debian_version exist?
you can mount the container root system with
Code: 
pct mount <CTID>

it will be mounted under
/var/lib/lxc/<CTID>/rootfs

if you can verify that the file exist you can unmount the container with

Code: 
pct unmount <CTID>
 
  • Like
Reactions: semanticbeeng and Hyacin
also:

lvmthin: local-lvm
disable
vgname pve
thinpool data
content none
Click to expand...

is invalid because the lvmthin storage type does not support a content type "none".
 
Hallo Fabian,
Thank you!
It really was content none

Furthermore it seems that mkdir 0 also generated Problems, but i think that's another problem.
So far it is working again. Thank you a lot!

cat debian_version:
Code: 
8.7

p.S. You guys create a great product. Thank you for your work!
 
Hello to all,
after today's upgrade from 7.2-11 to 7.2.14 LXC's won't boot

run_buffer: 321 Script exited with status 2
lxc_init: 847 Failed to run lxc.hook.pre-start for container "109"
__lxc_start: 2008 Failed to initialize container "109"
TASK ERROR: startup for container '109' failed

lxc-start 109 20221118200745.382 INFO confile - ../src/lxc/confile.c:set_config_idmaps:2267 - Read uid map: type u nsid 0 hostid 100000 range 65536
lxc-start 109 20221118200745.382 INFO confile - ../src/lxc/confile.c:set_config_idmaps:2267 - Read uid map: type g nsid 0 hostid 100000 range 65536
lxc-start 109 20221118200745.383 INFO lsm - ../src/lxc/lsm/lsm.c:lsm_init_static:38 - Initialized LSM security driver AppArmor
lxc-start 109 20221118200745.383 INFO conf - ../src/lxc/conf.c:run_script_argv:337 - Executing script "/usr/share/lxc/hooks/lxc-pve-prestart-hook" for container "109", config section "lxc"
lxc-start 109 20221118200747.295 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-prestart-hook 109 lxc pre-start produced output: objdump on /lib/systemd/systemd failed: open3: exec of objdump -p /var/lib/lxc/109/rootfs/lib/systemd/systemd failed: No such file or directory at /usr/share/perl5/PVE/Tools.pm line 455.

lxc-start 109 20221118200747.321 ERROR conf - ../src/lxc/conf.c:run_buffer:321 - Script exited with status 2
lxc-start 109 20221118200747.321 ERROR start - ../src/lxc/start.c:lxc_init:847 - Failed to run lxc.hook.pre-start for container "109"
lxc-start 109 20221118200747.321 ERROR start - ../src/lxc/start.c:__lxc_start:2008 - Failed to initialize container "109"
lxc-start 109 20221118200747.321 INFO conf - ../src/lxc/conf.c:run_script_argv:337 - Executing script "/usr/share/lxcfs/lxc.reboot.hook" for container "109", config section "lxc"
lxc-start 109 20221118200747.827 INFO conf - ../src/lxc/conf.c:run_script_argv:337 - Executing script "/usr/share/lxc/hooks/lxc-pve-poststop-hook" for container "109", config section "lxc"
lxc-start 109 20221118200749.635 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 109 lxc post-stop produced output: umount: /var/lib/lxc/.pve-staged-mounts/mp0: not mounted.

lxc-start 109 20221118200749.636 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 109 lxc post-stop produced output: command 'umount -- /var/lib/lxc/.pve-staged-mounts/mp0' failed: exit code 32

lxc-start 109 20221118200749.737 ERROR lxc_start - ../src/lxc/tools/lxc_start.c:main:306 - The container failed to start
lxc-start 109 20221118200749.738 ERROR lxc_start - ../src/lxc/tools/lxc_start.c:main:311 - Additional information can be obtained by setting the --logfile and --logpriority options


Host restart, restore from bck , ... nothing helps

so take caution ....
 
Last edited:
Hello everybody,

i have the same problem like tonci.
Here my log output , it seems like to be the same output like tonci .

lxc-start 202 20221118201852.612 INFO confile - ../src/lxc/confile.c:set_config_idmaps:2267 - Read uid map: type u nsid 0 hostid 100000 range 65536
lxc-start 202 20221118201852.612 INFO confile - ../src/lxc/confile.c:set_config_idmaps:2267 - Read uid map: type g nsid 0 hostid 100000 range 65536
lxc-start 202 20221118201852.615 INFO lsm - ../src/lxc/lsm/lsm.c:lsm_init_static:38 - Initialized LSM security driver AppArmor
lxc-start 202 20221118201852.615 INFO conf - ../src/lxc/conf.c:run_script_argv:337 - Executing script "/usr/share/lxc/hooks/lxc-pve-prestart-hook" for container "202", config section "lxc"
lxc-start 202 20221118201852.559 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-prestart-hook 202 lxc pre-start produced output: objdump on /lib/systemd/systemd failed: open3: exec of objdump -p /var/lib/lxc/202/rootfs/lib/systemd/systemd failed: No such file or directory at /usr/share/perl5/PVE/Tools.pm line 455.

lxc-start 202 20221118201852.569 ERROR conf - ../src/lxc/conf.c:run_buffer:321 - Script exited with status 2
lxc-start 202 20221118201852.569 ERROR start - ../src/lxc/start.c:lxc_init:847 - Failed to run lxc.hook.pre-start for container "202"
lxc-start 202 20221118201852.569 ERROR start - ../src/lxc/start.c:__lxc_start:2008 - Failed to initialize container "202"
lxc-start 202 20221118201852.569 INFO conf - ../src/lxc/conf.c:run_script_argv:337 - Executing script "/usr/share/lxcfs/lxc.reboot.hook" for container "202", config section "lxc"
lxc-start 202 20221118201853.716 INFO conf - ../src/lxc/conf.c:run_script_argv:337 - Executing script "/usr/share/lxc/hooks/lxc-pve-poststop-hook" for container "202", config section "lxc"
lxc-start 202 20221118201853.486 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 202 lxc post-stop produced output: umount: /var/lib/lxc/.pve-staged-mounts/mp0: not mounted.

lxc-start 202 20221118201853.486 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 202 lxc post-stop produced output: command 'umount -- /var/lib/lxc/.pve-staged-mounts/mp0' failed: exit code 32

lxc-start 202 20221118201853.519 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 202 lxc post-stop produced output: umount: /var/lib/lxc/.pve-staged-mounts/mp1: not mounted.

lxc-start 202 20221118201853.519 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 202 lxc post-stop produced output: command 'umount -- /var/lib/lxc/.pve-staged-mounts/mp1' failed: exit code 32

lxc-start 202 20221118201853.524 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 202 lxc post-stop produced output: umount: /var/lib/lxc/.pve-staged-mounts/mp2: not mounted.

lxc-start 202 20221118201853.524 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 202 lxc post-stop produced output: command 'umount -- /var/lib/lxc/.pve-staged-mounts/mp2' failed: exit code 32

lxc-start 202 20221118201853.549 ERROR lxc_start - ../src/lxc/tools/lxc_start.c:main:306 - The container failed to start
lxc-start 202 20221118201853.549 ERROR lxc_start - ../src/lxc/tools/lxc_start.c:main:311 - Additional information can be obtained by setting the --logfile and --logpriority options

I have no solution after 3 hours. o_O


;)
 
ProXXXX said:
Hello everybody,

i have the same problem like tonci.
Here my log output , it seems like to be the same output like tonci .

lxc-start 202 20221118201852.612 INFO confile - ../src/lxc/confile.c:set_config_idmaps:2267 - Read uid map: type u nsid 0 hostid 100000 range 65536
lxc-start 202 20221118201852.612 INFO confile - ../src/lxc/confile.c:set_config_idmaps:2267 - Read uid map: type g nsid 0 hostid 100000 range 65536
lxc-start 202 20221118201852.615 INFO lsm - ../src/lxc/lsm/lsm.c:lsm_init_static:38 - Initialized LSM security driver AppArmor
lxc-start 202 20221118201852.615 INFO conf - ../src/lxc/conf.c:run_script_argv:337 - Executing script "/usr/share/lxc/hooks/lxc-pve-prestart-hook" for container "202", config section "lxc"
lxc-start 202 20221118201852.559 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-prestart-hook 202 lxc pre-start produced output: objdump on /lib/systemd/systemd failed: open3: exec of objdump -p /var/lib/lxc/202/rootfs/lib/systemd/systemd failed: No such file or directory at /usr/share/perl5/PVE/Tools.pm line 455.

lxc-start 202 20221118201852.569 ERROR conf - ../src/lxc/conf.c:run_buffer:321 - Script exited with status 2
lxc-start 202 20221118201852.569 ERROR start - ../src/lxc/start.c:lxc_init:847 - Failed to run lxc.hook.pre-start for container "202"
lxc-start 202 20221118201852.569 ERROR start - ../src/lxc/start.c:__lxc_start:2008 - Failed to initialize container "202"
lxc-start 202 20221118201852.569 INFO conf - ../src/lxc/conf.c:run_script_argv:337 - Executing script "/usr/share/lxcfs/lxc.reboot.hook" for container "202", config section "lxc"
lxc-start 202 20221118201853.716 INFO conf - ../src/lxc/conf.c:run_script_argv:337 - Executing script "/usr/share/lxc/hooks/lxc-pve-poststop-hook" for container "202", config section "lxc"
lxc-start 202 20221118201853.486 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 202 lxc post-stop produced output: umount: /var/lib/lxc/.pve-staged-mounts/mp0: not mounted.

lxc-start 202 20221118201853.486 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 202 lxc post-stop produced output: command 'umount -- /var/lib/lxc/.pve-staged-mounts/mp0' failed: exit code 32

lxc-start 202 20221118201853.519 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 202 lxc post-stop produced output: umount: /var/lib/lxc/.pve-staged-mounts/mp1: not mounted.

lxc-start 202 20221118201853.519 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 202 lxc post-stop produced output: command 'umount -- /var/lib/lxc/.pve-staged-mounts/mp1' failed: exit code 32

lxc-start 202 20221118201853.524 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 202 lxc post-stop produced output: umount: /var/lib/lxc/.pve-staged-mounts/mp2: not mounted.

lxc-start 202 20221118201853.524 DEBUG conf - ../src/lxc/conf.c:run_buffer:310 - Script exec /usr/share/lxc/hooks/lxc-pve-poststop-hook 202 lxc post-stop produced output: command 'umount -- /var/lib/lxc/.pve-staged-mounts/mp2' failed: exit code 32

lxc-start 202 20221118201853.549 ERROR lxc_start - ../src/lxc/tools/lxc_start.c:main:306 - The container failed to start
lxc-start 202 20221118201853.549 ERROR lxc_start - ../src/lxc/tools/lxc_start.c:main:311 - Additional information can be obtained by setting the --logfile and --logpriority options

I have no solution after 3 hours. o_O


;)
Click to expand...
THE SOLUTION

apt install binutils

[mod edit]: ACTUAL LONG TERM SOLUTION: update to pve-container version 4.3-5
 
Last edited by a moderator:
  • Like
Reactions: newfoundland_republic, Marc_in_the_dark, KarateNils and 12 others
ProXXXX said:
THE SOLUTION

apt install binutils
Click to expand...
i also faced the issue on my cluster, but i didnt figure it out untill i saw the post, as i migrated one of the LXC's to a node which apparently had binutils already installed ( even tho i do try to take good care of keeping package-installations all in sync on the nodes).

But as said, this is the solution.

Question remains .. what has changed so this package is now 'required' ?
 
Last edited:
  • Like
Reactions: semanticbeeng, templar and zpider
This also solved my issue. However would appreciate a person with know-how to explain why binutils is the solution.

My problem started following an update of Proxmox to latest version. But why we need binutils is not very clear to me and would appreciate someone in the know to explain why it is needed as it seems unrelated to the problem.

The GNU Binutils are a collection of binary tools. The main ones are:


  • ld - the GNU linker.
  • as - the GNU assembler.
  • gold - a new, faster, ELF only linker.

But they also include:


  • addr2line - Converts addresses into filenames and line numbers.
  • ar - A utility for creating, modifying and extracting from archives.
  • c++filt - Filter to demangle encoded C++ symbols.
  • dlltool - Creates files for building and using DLLs.
  • elfedit - Allows alteration of ELF format files.
  • gprof - Displays profiling information.
  • gprofng - Collects and displays application performance data.
  • nlmconv - Converts object code into an NLM.
  • nm - Lists symbols from object files.
  • objcopy - Copies and translates object files.
  • objdump - Displays information from object files.
  • ranlib - Generates an index to the contents of an archive.
  • readelf - Displays information from any ELF format object file.
  • size - Lists the section sizes of an object or archive file.
  • strings - Lists printable strings from files.
  • strip - Discards symbols.
  • windmc - A Windows compatible message compiler.
  • windres - A compiler for Windows resource files.

Most of these programs use BFD, the Binary File Descriptor library, to do low-level manipulation. Many of them also use the opcodes library to assemble and disassemble machine instructions.


The binutils have been ported to most major Unix variants as well as Wintel systems, and their main reason for existence is to give the GNU system (and GNU/Linux) the facility to compile and link programs.
 
  • Like
Reactions: semanticbeeng and templar
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back