Errors in kern.log

odesport

New Member
Jul 8, 2013
27
0
1
Hi,

A lot of errors are written in kern.log, when VMs are launched :

Code:
 WARNING: at net/core/dev.c:1711 skb_gso_segment+0x220/0x310() (Tainted: G        W  ---------------   )
Jul 17 15:36:38 aragon3 kernel: Hardware name: PowerEdge M620
Jul 17 15:36:38 aragon3 kernel: tun: caps=(0x80000000, 0x0) len=9827 data_len=8327 ip_summed=1
Jul 17 15:36:38 aragon3 kernel: Modules linked in: ext4 jbd2 vzethdev vznetdev pio_nfs pio_direct pfmt_raw pfmt_ploop1 ploop simfs vzrst nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 vzcpt nf_conntrack vzdquota vzmon vzdev ip6t_REJECT ip6table_mangle ip6table_filter ip6_tables xt_length xt_hl xt_tcpmss xt_TCPMSS iptable_mangle iptable_filter xt_multiport xt_limit xt_dscp vhost_net ipt_REJECT tun macvtap macvlan kvm_intel ip_tables kvm dlm configfs fuse vzevent dm_round_robin ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi nfsd nfs auth_rpcgss nfs_acl fscache lockd sunrpc bonding 8021q garp ipv6 xfs dm_multipath snd_pcsp snd_pcm snd_page_alloc snd_timer snd soundcore sb_edac dcdbas iTCO_wdt wmi edac_core iTCO_vendor_support shpchp power_meter ext3 mbcache jbd ses sg enclosure ahci megaraid_sas bnx2x mdio [last unloaded: scsi_wait_scan]
Jul 17 15:36:38 aragon3 kernel: Pid: 3845, comm: rsyslogd veid: 0 Tainted: G        W  ---------------    2.6.32-20-pve #1
Jul 17 15:36:38 aragon3 kernel: Call Trace:
Jul 17 15:36:38 aragon3 kernel: <IRQ>  [<ffffffff8106b3e7>] ? warn_slowpath_common+0x87/0xe0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8106b4f6>] ? warn_slowpath_fmt+0x46/0x50
Jul 17 15:36:38 aragon3 kernel: [<ffffffff814494a0>] ? skb_gso_segment+0x220/0x310
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8144bc42>] ? dev_hard_start_xmit+0x1b2/0x4f0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff81480ae6>] ? ip_local_deliver_finish+0x126/0x2e0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff81468e7a>] ? sch_direct_xmit+0x16a/0x1d0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8144c445>] ? dev_queue_xmit+0x4c5/0x6a0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff814e2b80>] ? br_dev_queue_push_xmit+0x60/0xc0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff814e2c38>] ? br_forward_finish+0x58/0x60
Jul 17 15:36:38 aragon3 kernel: [<ffffffff814e2f2b>] ? __br_forward+0x9b/0xc0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8147660c>] ? nf_hook_slow+0xac/0x120
Jul 17 15:36:38 aragon3 kernel: [<ffffffff814e3e20>] ? br_handle_frame_finish+0x0/0x2f0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff814e30bd>] ? br_forward+0x5d/0x70
Jul 17 15:36:38 aragon3 kernel: [<ffffffff814e4017>] ? br_handle_frame_finish+0x1f7/0x2f0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff814e42ba>] ? br_handle_frame+0x1aa/0x250
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8144c91c>] ? __netif_receive_skb+0x23c/0x6e0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8144d008>] ? napi_skb_finish+0x38/0x70
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8144cf08>] ? netif_receive_skb+0x58/0x60
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8143de85>] ? __alloc_skb+0x95/0x260
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8144d020>] ? napi_skb_finish+0x50/0x70
Jul 17 15:36:38 aragon3 kernel: [<ffffffff814f24ac>] ? vlan_gro_receive+0x8c/0xa0
Jul 17 15:36:38 aragon3 kernel: [<ffffffffa004197a>] ? bnx2x_rx_int+0xefa/0x16b0 [bnx2x]
Jul 17 15:36:38 aragon3 kernel: [<ffffffff81051626>] ? enqueue_task+0x66/0x80
Jul 17 15:36:38 aragon3 kernel: [<ffffffff81010fef>] ? ich_force_enable_hpet+0x1cf/0x200
Jul 17 15:36:38 aragon3 kernel: [<ffffffffa00421d4>] ? bnx2x_poll+0xa4/0x2e0 [bnx2x]
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8144d879>] ? net_rx_action+0x199/0x3c0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff81074c7b>] ? __do_softirq+0x11b/0x260
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8100c32c>] ? call_softirq+0x1c/0x30
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8100de95>] ? do_softirq+0x75/0xb0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff81074f55>] ? irq_exit+0xc5/0xd0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff81523452>] ? do_IRQ+0x72/0xe0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8100bb13>] ? ret_from_intr+0x0/0x11
Jul 17 15:36:38 aragon3 kernel: <EOI>  [<ffffffff8106c3b8>] ? do_syslog+0x218/0x670
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8106c3e5>] ? do_syslog+0x245/0x670
Jul 17 15:36:38 aragon3 kernel: [<ffffffff810b4a59>] ? do_futex+0x159/0xad0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff81208100>] ? kmsg_read+0x0/0x60
Jul 17 15:36:38 aragon3 kernel: [<ffffffff81095300>] ? autoremove_wake_function+0x0/0x40
Jul 17 15:36:38 aragon3 kernel: [<ffffffff81208143>] ? kmsg_read+0x43/0x60
Jul 17 15:36:38 aragon3 kernel: [<ffffffff811fc5db>] ? proc_reg_read+0x7b/0xc0
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8151ad3c>] ? thread_return+0xbc/0x870
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8119333e>] ? vfs_read+0x9e/0x190
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8119347a>] ? sys_read+0x4a/0x90
Jul 17 15:36:38 aragon3 kernel: [<ffffffff8100b182>] ? system_call_fastpath+0x16/0x1b
Jul 17 15:36:38 aragon3 kernel: ---[ end trace ba10d782271997b7 ]---
Jul 17 15:40:23 aragon3 kernel: vmbr0: port 2(tap101i0) entering disabled state
Jul 17 15:40:23 aragon3 kernel: vmbr0: port 2(tap101i0) entering disabled state
Jul 17 15:40:23 aragon3 kernel: vmbr1: port 2(tap101i1) entering disabled state
Jul 17 15:40:23 aragon3 kernel: vmbr1: port 2(tap101i1) entering disabled state
Jul 17 15:40:39 aragon3 kernel: device tap101i0 entered promiscuous mode
Jul 17 15:40:39 aragon3 kernel: vmbr0: port 2(tap101i0) entering forwarding state
Jul 17 15:40:39 aragon3 kernel: device tap101i1 entered promiscuous mode
Jul 17 15:40:39 aragon3 kernel: vmbr1: port 2(tap101i1) entering forwarding state
Jul 17 15:40:50 aragon3 kernel: tap101i0: no IPv6 routers present
Jul 17 15:40:50 aragon3 kernel: tap101i1: no IPv6 routers present
Jul 17 15:45:13 aragon3 kernel: kvm: 226574: cpu0 unhandled rdmsr: 0x345
Jul 17 15:45:13 aragon3 kernel: kvm: 226574: cpu0 unhandled wrmsr: 0x40 data 0
Jul 17 15:45:13 aragon3 kernel: kvm: 226574: cpu0 unhandled wrmsr: 0x60 data 0

I've tried different processors (kvm64, qemu64, core2duo), network cards (virio, intel) or hard disks (virtio, scsi) but there's no change.

Code:
pveversion --verbose
pve-manager: 3.0-23 (pve-manager/3.0/957f0862)
running kernel: 2.6.32-20-pve
proxmox-ve-2.6.32: 3.0-100
pve-kernel-2.6.32-20-pve: 2.6.32-100
lvm2: 2.02.95-pve3
clvm: 2.02.95-pve3
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-1
pve-cluster: 3.0-4
qemu-server: 3.0-20
pve-firmware: 1.0-22
libpve-common-perl: 3.0-4
libpve-access-control: 3.0-4
libpve-storage-perl: 3.0-8
vncterm: 1.1-4
vzctl: 4.0-1pve3
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-13
ksm-control-daemon: 1.1-1

Product : Dell PowerEdge M620
Version : PowerEdge M1000e
 
pls test with latest kernel (2.6.32-22-107) and report.
 
I've installed pve-kernel-2.6.32-22-pve_2.6.32-107_amd64.deb but the problem is the same.
 
Have exactly the same problem with PowerEdge M620 and Proxmox 3.0.
Did you find any answer/fix for this error?
 
The only solution I've found is to disable rx-checksumming on the hypervisors :

ethtool -K eth0 rx off
 
I'm hopping into this thread because I am experiencing the same problem on a dell t110. I do indeed have several FreeBSD guests:

Code:
Sep  8 21:11:08 asgaard kernel: WARNING: at net/core/dev.c:1758 skb_gso_segment+0x220/0x310() (Tainted: G        W  ---------------   )Sep  8 21:11:08 asgaard kernel: Hardware name: PowerEdge T110
Sep  8 21:11:08 asgaard kernel: tg3: caps=(0x9b3, 0x0) len=4396 data_len=0 ip_summed=0
Sep  8 21:11:08 asgaard kernel: Modules linked in: vzethdev vznetdev pio_nfs pio_direct pfmt_raw pfmt_ploop1 ploop simfs vzrst nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 vzcpt nf_conntrack vzdquota vzmon vzdev ip6t_REJECT ip6table_mangle ip6table_filter ip6_tables xt_length xt_hl xt_tcpmss xt_TCPMSS iptable_mangle iptable_filter xt_multiport xt_limit xt_dscp ipt_REJECT ip_tables vhost_net macvtap macvlan kvm_intel kvm dlm configfs drbd fuse tun vzevent ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ipv6 dummy snd_pcsp dcdbas snd_pcm snd_page_alloc snd_timer snd soundcore power_meter iTCO_wdt iTCO_vendor_support ext3 mbcache jbd raid1 sg tg3 ahci ata_generic pata_acpi [last unloaded: scsi_wait_scan]
Sep  8 21:11:08 asgaard kernel: Pid: 3461, comm: vhost-3448 veid: 0 Tainted: G        W
 
My last information on that is that the problem is related to the FreeBSD packet filtering code ('pfctl -e' triggers those messages).
 
My last information on that is that the problem is related to the FreeBSD packet filtering code ('pfctl -e' triggers those messages).

Thank you. That did seem to be the problem. As soon as switched from PF to another firewall the errors went away.
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!