EEE disable eth0

Discussion in 'Proxmox VE: Networking and Firewall' started by José Claudio, Aug 9, 2018.

  1. José Claudio

    José Claudio New Member

    Joined:
    Aug 9, 2018
    Messages:
    1
    Likes Received:
    0
    good evening everyone..

    I recently installed a proxmox 5.2.1 server and I have two vms on it, samba domain controller and one with a debian with a LAMP.
    I am facing serious problems when running a backup on local or remote storage via NFS, my firewall simply for the eth0 local interface.

    in the cat / var / log / syslog of my firewall server displays the following error

    [18:54, 9/8/2018] Claudio: ug 1 19:57:45 firewall kernel: tg3 0000: 01: 00.0 eth0: 0x00007000: 0x08000008, 0x00000000, 0x00000000, 0x00004af4
    Aug 1 19:57:45 Firewall kernel: tg3 0000: 01: 00.0 eth0: 0x00007010: 0x6078fa0d, 0x01c08073, 0x00d70081, 0x03008200
    Aug 1 19:57:45 Firewall kernel: tg3 0000: 01: 00.0 eth0: 0x00007020: 0x00000000, 0x00000000, 0x00000406, 0x10004000
    Aug 1 19:57:45 Firewall kernel: tg3 0000: 01: 00.0 eth0: 0x00007030: 0x000e0000, 0x00004af8, 0x00170030, 0x00000000
    Aug 1 19:57:45 firewall kernel: tg3 0000: 01: 00.0 eth0: 0: Host status block [00000001: 00000023: (0000: 0003: 0000) :( 0000: 0064)]
    Aug 1 19:57:45 Firewall kernel: tg3 0000: 01: 00.0 eth0: 0: NAPI info [00000023: 00000023: (006d: 0064: 01ff): 0000: (00db: 0000: 0000: 0000)]
    Aug 1 19:57:45 firewall kernel: tg3 0000: 01: 00.0 eth0: 1: Host status block [00000001: 00000018: (0000: 0000: 0000) :( 001d: 0000)]
    Aug 1 19:57:45 firewall kernel: tg3 0000: 01: 00.0 eth0: 1: NAPI info [0000000d: 0000000d: (0000: 0000: 01ff): 000c: (000c: 000c: 0000: 0000)]
    Aug 1 19:57:45 firewall kernel: tg3 0000: 01: 00.0 eth0: 2: Host status block [00000001: 00000001: (0000: 0000: 0000) :( 0000: 0000)]
    Aug 1 19:57:45 Firewall kernel: tg3 0000: 01: 00.0 eth0: 2: NAPI info [00000001: 00000001: (0000: 0000: 01ff): 0000: (0000: 0000: 0000: 0000)]
    Aug 1 19:57:45 firewall kernel: tg3 0000: 01: 00.0 eth0: 3: Host status block [00000001: 00000009: (0000: 0000: 0000) :( 0000: 0000)]
    Aug 1 19:57:45 Firewall kernel: tg3 0000: 01: 00.0 eth0: 3: NAPI info [00000009: 00000009: (0000: 0000: 01ff): 0008: (0008: 0007: 0000: 0000)]
    Aug 1 19:57:45 firewall kernel: tg3 0000: 01: 00.0 eth0: 4: Host status block [00000001: 00000005: (0000: 0000: 0004) :( 0000: 0000)]
    Aug 1 19:57:45 Firewall kernel: tg3 0000: 01: 00.0 eth0: 4: NAPI info [00000005: 00000005: (0000: 0000: 01ff): 0004: (0004: 0000: 0000: 0000)]
    Aug 1 19:57:45 firewall kernel: tg3 0000: 01: 00.0 eth0: Link is down
    Aug 1 19:57:47 firewall kernel: tg3 0000: 01: 00.0 eth0: Link is up to 100 Mbps, full duplex
    Aug 1 19:57:47 firewall kernel: tg3 0000: 01: 00.0 eth0: Flow control is on for TX and on RX
    Aug 1 19:57:47 firewall kernel: tg3 0000: 01: 00.0 eth0: EEE is disabled
    Aug 1 19:57:48 firewall kernel: IPv4: martian source 192.168.1.18 from 192.168.1.1, on dev eth3
    Aug 1 19:57:48 firewall kernel: ll header: 00000000: ff ff ff ff ff ff 74 e6 e2 d1 7d 99 08 06 ...... t ...} ...
    Aug 1 19:57:48 firewall kernel: IPv4: martian source 192.168.1.10 from 192.16
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice