Disk Failure after Proxmox installation

M

manues50

Active Member
Jul 25, 2019
58
0
26
36
Hello

I have installed Proxmox VE over Raid 1 on my 1TB SSDs
And I can see that one of the disks in Raid 1 getting failed, I try to destroyed raid 1 and created new but the same issue continue

Also, I tried with new two SSDs and the same issue is happening
 
how did you create your raid? hw raid/zfs ? and where do you see that it fails? anything in the logs (journalctl / dmesg)
 
what exactly is your 'Server UI' ? what message exactly do you get? also please check your logs for errors
 
I am using an HP blade server, so there will be a UI to do Raid and I can see the storage status, etc

Please find the attachment
 

Attachments

  • blade.PNG
    blade.PNG
    207 KB · Views: 11
maybe the cable to the raid controller is broken? anyway if it is a hardware raid it probably has nothing to do with proxmox, as it will only see the logical disk
 
I don't think so this is a Raid controller issue because this error is happing once the OS installation is complete
Do you think We should go for any specific SSDs? Like any Brand/series
 
manues50 said:
I don't think so this is a Raid controller issue because this error is happing once the OS installation is complete
Click to expand...
did you try also with a different os? also please post the log/dmesg
 
Its looks stable with zfs


I am facing another strange thing, was trying to restore my VM(from another Proxmox) and I am getting an error

restore vma archive: lzop -d -c /var/lib/vz/dump/vzdump-qemu-210-2020_10_08-11_59_08.vma.lzo | vma extract -v -r /var/tmp/vzdumptmp33845.fifo - /var/tmp/vzdumptmp33845
CFG: size: 427 name: qemu-server.conf
DEV: dev_id=1 size: 68719476736 devname: drive-scsi0
CTIME: Thu Oct 8 11:59:11 2020
no lock found trying to remove 'create' lock
TASK ERROR: command 'set -o pipefail && lzop -d -c /var/lib/vz/dump/vzdump-qemu-210-2020_10_08-11_59_08.vma.lzo | vma extract -v -r /var/tmp/vzdumptmp33845.fifo - /var/tmp/vzdumptmp33845' failed: storage 'local-lvm' does not exist
 
We have still issues

Can you tell me how to change Kernel in Proxmox ? I would like to try another kernel version
 
You must log in or register to reply here.
Top Bottom