Debian VM sehr langsam

klotzma

Member
Jul 23, 2019
32
1
13
27
Hallo Liebe Community,

Ich habe ein Problem seit 3 Tagen, eine Debian VM indem ich mein ioBroker laufen habe, ist sehr langsam.
Wenn ich über SSH auf das Terminal gehe, kann ich alles nur sehr Zeitversetzt eingeben und mit viel warten, genauso der ioBroker läuft darauf sehr stockend.

Ich habe nun schon mehrere Sachen ausprobiert: den ioBroker service gestoppt, hat sich nichts verändert.
Über den Befehl "Top", die laufenden Prozesse ausgelesen, war nichts auffälliges zu erkennen.
VM und Proxmox neugestartet und zu guter letzt ein Rollback eines Backups, hat aber alles nichts geändert!

Der CPU ist so gut wie gar nicht belastet, aber man sieht auf der VM über der Proxmox Oberfläche, ein Zickzack des Disk I/O die andauernd beschrieben wird und das alle paar Minuten und um ein paar MB mehr.

Der Ram ist zur hälfte belegt, was mir die Oberfläche anzeigt, aber über SSH sehe ich nur 200 MB belegter Ram.

Meine Hardware:
Intel NUC6CAYH
8GB Ram
250 GB SSD

Ich hoffe mir kann hier jemand weiterhelfen, habe alles schon versucht, mit Hilfe aus anderen Foren.
Danke.

1563743855252-screenshot_20190721-231650_samsung-internet.jpg
 
hi,

wie schaut deine vm config aus? irgendwelche weird settings vielleicht? `qm config VMID`
 
Hier die Ausgabe:
Code:
root@pve:~# qm config 100
bootdisk: scsi0
cores: 2
ide2: local:iso/debian-9.8.0-amd64-netinst.iso,media=cdrom
memory: 3072
name: IoBroker
net0: virtio=EA:D7:A4:C4:3C:93,bridge=vmbr0
numa: 0
onboot: 1
ostype: l26
scsi0: local-lvm:vm-100-disk-0,size=32G
scsihw: virtio-scsi-pci
smbios1: uuid=16a78f91-c8e9-487c-987a-e4be96aa300d
sockets: 1
usb0: host=1-2
usb2: host=8087:0aa7
vmgenid: 4a545b29-48d0-49b1-ad6d-83a2e7216a7b
root@pve:~#
 
Naja du hast immer wieder hohes Diskwrite. 500MB/s spitzen. Was passiert denn da? VM-Config sieht gut aus. Was sagt denn das Log in der VM?
 
Ich habe den Fehler gedunden, ich habe gerade anfangen wollen alles neu in eine andere VM aufzusetzen und habe dann auch wieder das interne Bluetooth durchgereicht und plötzlich war das gleiche Problem in der anderen VM.
Also habe ich das Bluetooth unter der VM Hardware rausgenommen und plötzlich lief es wieder stabil.

Wie kann das sein ?
 
Journal Log:

Code:
root@iobroker:~# journalctl
-- Logs begin at Wed 2019-07-24 22:17:38 CEST, end at Wed 2019-07-24 22:19:05 CEST. --
Jul 24 22:17:38 iobroker kernel: Linux version 4.9.0-9-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.1
Jul 24 22:17:38 iobroker kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-9-amd64 root=UUID=5f18ae93-4eca-4ad9-bc09-d7dca66975a4 ro quiet
Jul 24 22:17:38 iobroker kernel: x86/fpu: Legacy x87 FPU detected.
Jul 24 22:17:38 iobroker kernel: e820: BIOS-provided physical RAM map:
Jul 24 22:17:38 iobroker kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Jul 24 22:17:38 iobroker kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Jul 24 22:17:38 iobroker kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
Jul 24 22:17:38 iobroker kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000bffd6fff] usable
Jul 24 22:17:38 iobroker kernel: BIOS-e820: [mem 0x00000000bffd7000-0x00000000bfffffff] reserved
Jul 24 22:17:38 iobroker kernel: BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
Jul 24 22:17:38 iobroker kernel: BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
Jul 24 22:17:38 iobroker kernel: NX (Execute Disable) protection: active
Jul 24 22:17:38 iobroker kernel: SMBIOS 2.8 present.
Jul 24 22:17:38 iobroker kernel: DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
Jul 24 22:17:38 iobroker kernel: Hypervisor detected: KVM
Jul 24 22:17:38 iobroker kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Jul 24 22:17:38 iobroker kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Jul 24 22:17:38 iobroker kernel: AGP: No AGP bridge found
Jul 24 22:17:38 iobroker kernel: e820: last_pfn = 0xbffd7 max_arch_pfn = 0x400000000
Jul 24 22:17:38 iobroker kernel: MTRR default type: write-back
Jul 24 22:17:38 iobroker kernel: MTRR fixed ranges enabled:
Jul 24 22:17:38 iobroker kernel:   00000-9FFFF write-back
Jul 24 22:17:38 iobroker kernel:   A0000-BFFFF uncachable
Jul 24 22:17:38 iobroker kernel:   C0000-FFFFF write-protect
Jul 24 22:17:38 iobroker kernel: MTRR variable ranges enabled:
Jul 24 22:17:38 iobroker kernel:   0 base 00C0000000 mask FFC0000000 uncachable
Jul 24 22:17:38 iobroker kernel:   1 disabled
Jul 24 22:17:38 iobroker kernel:   2 disabled
Jul 24 22:17:38 iobroker kernel:   3 disabled
Jul 24 22:17:38 iobroker kernel:   4 disabled
Jul 24 22:17:38 iobroker kernel:   5 disabled
Jul 24 22:17:38 iobroker kernel:   6 disabled
Jul 24 22:17:38 iobroker kernel:   7 disabled
Jul 24 22:17:38 iobroker kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC
Jul 24 22:17:38 iobroker kernel: found SMP MP-table at [mem 0x000f58f0-0x000f58ff] mapped at [ffff899e800f58f0]
Jul 24 22:17:38 iobroker kernel: Base memory trampoline at [ffff899e80099000] 99000 size 24576
Jul 24 22:17:38 iobroker kernel: BRK [0x70934000, 0x70934fff] PGTABLE
Jul 24 22:17:38 iobroker kernel: BRK [0x70935000, 0x70935fff] PGTABLE
Jul 24 22:17:38 iobroker kernel: BRK [0x70936000, 0x70936fff] PGTABLE
Jul 24 22:17:38 iobroker kernel: BRK [0x70937000, 0x70937fff] PGTABLE
Jul 24 22:17:38 iobroker kernel: BRK [0x70938000, 0x70938fff] PGTABLE
Jul 24 22:17:38 iobroker kernel: BRK [0x70939000, 0x70939fff] PGTABLE
root@iobroker:~#
 
Dmesg

Code:
root@iobroker:~# dmesg
[    0.000000] Linux version 4.9.0-9-amd64 (debian-kernel@lists.debian.org) (gcc                                                                                        version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.168-1+deb9u4                                                                                        (2019-07-19)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-9-amd64 root=UUID=5f1                                                                                       8ae93-4eca-4ad9-bc09-d7dca66975a4 ro quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd6fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffd7000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9                                                                                       626ccb91-prebuilt.qemu-project.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0xbffd7 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask FFC0000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC
[    0.000000] found SMP MP-table at [mem 0x000f58f0-0x000f58ff] mapped at [ffff8                                                                                       99e800f58f0]
[    0.000000] Base memory trampoline at [ffff899e80099000] 99000 size 24576
[    0.000000] BRK [0x70934000, 0x70934fff] PGTABLE
[    0.000000] BRK [0x70935000, 0x70935fff] PGTABLE
[    0.000000] BRK [0x70936000, 0x70936fff] PGTABLE
[    0.000000] BRK [0x70937000, 0x70937fff] PGTABLE
[    0.000000] BRK [0x70938000, 0x70938fff] PGTABLE
[    0.000000] BRK [0x70939000, 0x70939fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35d4f000-0x36e9efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F5700 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000BFFE14C7 000034 (v01 BOCHS  BXPCRSDT 00000001                                                                                        BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000BFFE12D1 000074 (v01 BOCHS  BXPCFACP 00000001                                                                                        BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000BFFDF040 002291 (v01 BOCHS  BXPCDSDT 00000001                                                                                        BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000BFFDF000 000040
[    0.000000] ACPI: APIC 0x00000000BFFE1345 000080 (v01 BOCHS  BXPCAPIC 00000001                                                                                        BXPC 00000001)
[    0.000000] ACPI: SSDT 0x00000000BFFE13C5 0000CA (v01 BOCHS  VMGENID  00000001                                                                                        BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000BFFE148F 000038 (v01 BOCHS  BXPCHPET 00000001                                                                                        BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bffd6fff]
[    0.000000] NODE_DATA(0) allocated [mem 0xbffd2000-0xbffd6fff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:bffca001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 18953373710 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd                                                                                       42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000bffd6fff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bffd6fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bffd6fff]
[    0.000000] On node 0 totalpages: 786293
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12224 pages used for memmap
[    0.000000]   DMA32 zone: 782295 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xfffff                                                                                       fff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node                                                                                       _ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff899f3fa00000 s105304 r8192 d298                                                                                       64 u1048576
[    0.000000] pcpu-alloc: s105304 r8192 d29864 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr bfa101c0
[    0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total page                                                                                       s: 773984
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-9-amd64 root=U                                                                                       UID=5f18ae93-4eca-4ad9-bc09-d7dca66975a4 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3062200K/3145172K available (6273K kernel code, 1162K rwda                                                                                       ta, 2876K rodata, 1424K init, 656K bss, 82972K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:440 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_id                                                                                       le_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 1497.600 MHz processor
[    0.235006] Calibrating delay loop (skipped) preset value.. 2995.20 BogoMIPS (                                                                                       lpj=5990400)
[    0.235010] pid_max: default: 32768 minimum: 301
[    0.235030] ACPI: Core revision 20160831
[    0.238127] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.238189] Security Framework initialized
[    0.238191] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.238199] AppArmor: AppArmor disabled by boot time parameter
[    0.238944] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.240781] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.241351] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.241361] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.242263] mce: CPU supports 10 MCE banks
[    0.242327] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.242328] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.242331] Spectre V2 : Mitigation: Full generic retpoline
[    0.242332] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on co                                                                                       ntext switch
[    0.242333] Speculative Store Bypass: Vulnerable
[    0.242430] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.245080] Freeing SMP alternatives memory: 24K
[    0.253740] ftrace: allocating 25319 entries in 99 pages
[    0.301418] smpboot: Max logical packages: 1
[    0.301823] x2apic enabled
[    0.302227] Switched APIC routing to physical x2apic.
[    0.304014] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.411223] smpboot: CPU0: Intel Common KVM processor (family: 0xf, model: 0x6                                                                                       , stepping: 0x1)
[    0.411232] Performance Events: unsupported Netburst CPU model 6 no PMU driver                                                                                       , software events only.
[    0.411263] KVM setup paravirtual spinlock
[    0.412299] x86: Booting SMP configuration:
[    0.412302] .... node  #0, CPUs:      #1
[    0.423343] kvm-clock: cpu 1, msr 0:bffca041, secondary cpu clock
[    0.425717] KVM setup async PF for cpu 1
[    0.425726] kvm-stealtime: cpu 1, msr bfb101c0
[    0.425761] x86: Booted up 1 node, 2 CPUs
[    0.425764] smpboot: Total of 2 processors activated (5990.40 BogoMIPS)
[    0.426928] devtmpfs: initialized
[    0.427056] x86/mm: Memory block size: 128MB
[    0.430559] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max                                                                                       _idle_ns: 7645041785100000 ns
[    0.430568] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.430635] pinctrl core: initialized pinctrl subsystem
[    0.430879] NET: Registered protocol family 16
[    0.441661] cpuidle: using governor ladder
[    0.457729] cpuidle: using governor menu
[    0.458066] ACPI: bus type PCI registered
[    0.458069] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.458451] PCI: Using configuration type 1 for base access
[    0.475696] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.476904] ACPI: Added _OSI(Module Device)
[    0.476906] ACPI: Added _OSI(Processor Device)
[    0.476907] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.476908] ACPI: Added _OSI(Processor Aggregator Device)
[    0.480131] ACPI: Interpreter enabled
[    0.480157] ACPI: (supports S0 S3 S4 S5)
[    0.480159] ACPI: Using IOAPIC for interrupt routing
[    0.480186] PCI: Using host bridge windows from ACPI; if necessary, use "pci=n                                                                                       ocrs" and report a bug
[    0.489847] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.489855] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.489865] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.489876] acpi PNP0A03:00: fail to add MMCONFIG information, can't access ex                                                                                       tended PCI configuration space under this bridge.
[    0.490480] acpiphp: Slot [3] registered
[    0.490551] acpiphp: Slot [4] registered
[    0.490624] acpiphp: Slot [5] registered
[    0.490698] acpiphp: Slot [6] registered
[    0.490769] acpiphp: Slot [7] registered
[    0.490855] acpiphp: Slot [8] registered
[    0.490928] acpiphp: Slot [9] registered
[    0.491003] acpiphp: Slot [10] registered
[    0.491094] acpiphp: Slot [11] registered
[    0.491165] acpiphp: Slot [12] registered
[    0.491237] acpiphp: Slot [13] registered
[    0.491329] acpiphp: Slot [14] registered
[    0.491400] acpiphp: Slot [15] registered
[    0.491469] acpiphp: Slot [16] registered
[    0.491542] acpiphp: Slot [17] registered
[    0.491616] acpiphp: Slot [18] registered
[    0.491687] acpiphp: Slot [19] registered
[    0.491757] acpiphp: Slot [20] registered
[    0.491827] acpiphp: Slot [21] registered
[    0.491896] acpiphp: Slot [22] registered
[    0.491969] acpiphp: Slot [23] registered
[    0.492073] acpiphp: Slot [24] registered
[    0.492147] acpiphp: Slot [25] registered
[    0.492220] acpiphp: Slot [26] registered
[    0.492309] acpiphp: Slot [27] registered
[    0.492381] acpiphp: Slot [28] registered
[    0.492485] PCI host bridge to bus 0000:00
[    0.492489] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.492491] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.492493] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff wind                                                                                       ow]
[    0.492494] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff wind                                                                                       ow]
[    0.492496] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff wi                                                                                       ndow]
[    0.492499] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.492573] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.493355] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.494461] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.498738] pci 0000:00:01.1: reg 0x20: [io  0xe100-0xe10f]
[    0.500533] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.500536] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.500538] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.500539] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.500916] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
[    0.505184] pci 0000:00:01.2: reg 0x20: [io  0xe040-0xe05f]
[    0.507241] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.508056] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.508077] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.508550] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.514443] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.519250] pci 0000:00:02.0: reg 0x18: [mem 0xfea50000-0xfea50fff]
[    0.528885] pci 0000:00:02.0: reg 0x30: [mem 0xfea40000-0xfea4ffff pref]
[    0.529459] pci 0000:00:03.0: [1af4:1002] type 00 class 0x00ff00
[    0.531149] pci 0000:00:03.0: reg 0x10: [io  0xe060-0xe07f]
[    0.539242] pci 0000:00:03.0: reg 0x20: [mem 0xfe400000-0xfe403fff 64bit pref]
[    0.542090] pci 0000:00:05.0: [1af4:1004] type 00 class 0x010000
[    0.545522] pci 0000:00:05.0: reg 0x10: [io  0xe000-0xe03f]
[    0.550718] pci 0000:00:05.0: reg 0x14: [mem 0xfea51000-0xfea51fff]
[    0.558875] pci 0000:00:05.0: reg 0x20: [mem 0xfe404000-0xfe407fff 64bit pref]
[    0.565602] pci 0000:00:12.0: [1af4:1000] type 00 class 0x020000
[    0.568052] pci 0000:00:12.0: reg 0x10: [io  0xe080-0xe09f]
[    0.570324] pci 0000:00:12.0: reg 0x14: [mem 0xfea52000-0xfea52fff]
[    0.579383] pci 0000:00:12.0: reg 0x20: [mem 0xfe408000-0xfe40bfff 64bit pref]
[    0.581621] pci 0000:00:12.0: reg 0x30: [mem 0xfea00000-0xfea3ffff pref]
[    0.582960] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.589426] pci 0000:00:1d.0: reg 0x20: [io  0xe0a0-0xe0bf]
[    0.591514] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.595797] pci 0000:00:1d.1: reg 0x20: [io  0xe0c0-0xe0df]
[    0.600467] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.604798] pci 0000:00:1d.2: reg 0x20: [io  0xe0e0-0xe0ff]
[    0.606951] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.607874] pci 0000:00:1d.7: reg 0x10: [mem 0xfea53000-0xfea53fff]
[    0.615596] pci 0000:00:1e.0: [1b36:0001] type 01 class 0x060400
[    0.617624] pci 0000:00:1e.0: reg 0x10: [mem 0xfea54000-0xfea540ff 64bit]
[    0.620366] pci 0000:00:1f.0: [1b36:0001] type 01 class 0x060400
[    0.622253] pci 0000:00:1f.0: reg 0x10: [mem 0xfea55000-0xfea550ff 64bit]
[    0.628340] acpiphp: Slot [0] registered
[    0.628415] acpiphp: Slot [1] registered
[    0.628493] acpiphp: Slot [2] registered
[    0.628574] acpiphp: Slot [3-2] registered
[    0.628653] acpiphp: Slot [4-2] registered
[    0.628734] acpiphp: Slot [5-2] registered
[    0.628813] acpiphp: Slot [6-2] registered
[    0.628895] acpiphp: Slot [7-2] registered
[    0.628978] acpiphp: Slot [8-2] registered
[    0.629060] acpiphp: Slot [9-2] registered
[    0.629142] acpiphp: Slot [10-2] registered
[    0.629223] acpiphp: Slot [11-2] registered
[    0.629304] acpiphp: Slot [12-2] registered
[    0.629384] acpiphp: Slot [13-2] registered
[    0.629464] acpiphp: Slot [14-2] registered
[    0.629547] acpiphp: Slot [15-2] registered
[    0.629630] acpiphp: Slot [16-2] registered
[    0.629710] acpiphp: Slot [17-2] registered
[    0.629790] acpiphp: Slot [18-2] registered
[    0.629869] acpiphp: Slot [19-2] registered
[    0.629949] acpiphp: Slot [20-2] registered
[    0.630030] acpiphp: Slot [21-2] registered
[    0.630113] acpiphp: Slot [22-2] registered
 
Fortsetzung dmesg
Code:
[    0.630195] acpiphp: Slot [23-2] registered
[    0.630276] acpiphp: Slot [24-2] registered
[    0.630357] acpiphp: Slot [25-2] registered
[    0.630437] acpiphp: Slot [26-2] registered
[    0.630518] acpiphp: Slot [27-2] registered
[    0.630600] acpiphp: Slot [28-2] registered
[    0.630677] acpiphp: Slot [29] registered
[    0.630751] acpiphp: Slot [30] registered
[    0.630826] acpiphp: Slot [31] registered
[    0.631369] pci 0000:00:1e.0: PCI bridge to [bus 01]
[    0.631408] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.631445] pci 0000:00:1e.0:   bridge window [mem 0xfe800000-0xfe9fffff]
[    0.631512] pci 0000:00:1e.0:   bridge window [mem 0xfe200000-0xfe3fffff 64bit                                                                                        pref]
[    0.633402] acpiphp: Slot [0-2] registered
[    0.633486] acpiphp: Slot [1-2] registered
[    0.633569] acpiphp: Slot [2-2] registered
[    0.633650] acpiphp: Slot [3-3] registered
[    0.633732] acpiphp: Slot [4-3] registered
[    0.633812] acpiphp: Slot [5-3] registered
[    0.633893] acpiphp: Slot [6-3] registered
[    0.633973] acpiphp: Slot [7-3] registered
[    0.634054] acpiphp: Slot [8-3] registered
[    0.634136] acpiphp: Slot [9-3] registered
[    0.634217] acpiphp: Slot [10-3] registered
[    0.634300] acpiphp: Slot [11-3] registered
[    0.635993] acpiphp: Slot [12-3] registered
[    0.636133] acpiphp: Slot [13-3] registered
[    0.636215] acpiphp: Slot [14-3] registered
[    0.636302] acpiphp: Slot [15-3] registered
[    0.636384] acpiphp: Slot [16-3] registered
[    0.636469] acpiphp: Slot [17-3] registered
[    0.636552] acpiphp: Slot [18-3] registered
[    0.636637] acpiphp: Slot [19-3] registered
[    0.636723] acpiphp: Slot [20-3] registered
[    0.636806] acpiphp: Slot [21-3] registered
[    0.636891] acpiphp: Slot [22-3] registered
[    0.636975] acpiphp: Slot [23-3] registered
[    0.637060] acpiphp: Slot [24-3] registered
[    0.637144] acpiphp: Slot [25-3] registered
[    0.637230] acpiphp: Slot [26-3] registered
[    0.637311] acpiphp: Slot [27-3] registered
[    0.637392] acpiphp: Slot [28-3] registered
[    0.637473] acpiphp: Slot [29-2] registered
[    0.637556] acpiphp: Slot [30-2] registered
[    0.637642] acpiphp: Slot [31-2] registered
[    0.638178] pci 0000:00:1f.0: PCI bridge to [bus 02]
[    0.638216] pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
[    0.638252] pci 0000:00:1f.0:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.638319] pci 0000:00:1f.0:   bridge window [mem 0xfe000000-0xfe1fffff 64bit                                                                                        pref]
[    0.641589] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.641793] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.641974] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.642152] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.642246] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.642645] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.643191] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.643194] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,                                                                                       locks=none
[    0.643199] vgaarb: loaded
[    0.643201] vgaarb: bridge control possible 0000:00:02.0
[    0.643595] PCI: Using ACPI for IRQ routing
[    0.643600] PCI: pci_cache_line_size set to 64 bytes
[    0.644177] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.644181] e820: reserve RAM buffer [mem 0xbffd7000-0xbfffffff]
[    0.644808] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.644844] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.644849] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.648328] clocksource: Switched to clocksource kvm-clock
[    0.658743] VFS: Disk quotas dquot_6.6.0
[    0.658786] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.658975] pnp: PnP ACPI init
[    0.659077] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.659142] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.659193] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.659211] pnp 00:03: [dma 2]
[    0.659238] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.659901] pnp: PnP ACPI: found 4 devices
[    0.670850] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idl                                                                                       e_ns: 2085701024 ns
[    0.672935] pci 0000:00:1e.0: PCI bridge to [bus 01]
[    0.672966] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.674245] pci 0000:00:1e.0:   bridge window [mem 0xfe800000-0xfe9fffff]
[    0.675102] pci 0000:00:1e.0:   bridge window [mem 0xfe200000-0xfe3fffff 64bit                                                                                        pref]
[    0.678113] pci 0000:00:1f.0: PCI bridge to [bus 02]
[    0.678155] pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
[    0.679421] pci 0000:00:1f.0:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.680308] pci 0000:00:1f.0:   bridge window [mem 0xfe000000-0xfe1fffff 64bit                                                                                        pref]
[    0.682058] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.682061] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.682063] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.682065] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.682067] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[    0.682071] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.682073] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
[    0.682075] pci_bus 0000:01: resource 2 [mem 0xfe200000-0xfe3fffff 64bit pref]
[    0.682078] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.682080] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe7fffff]
[    0.682081] pci_bus 0000:02: resource 2 [mem 0xfe000000-0xfe1fffff 64bit pref]
[    0.682332] NET: Registered protocol family 2
[    0.682601] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.683167] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.683344] TCP: Hash tables configured (established 32768 bind 32768)
[    0.683389] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.683426] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.683638] NET: Registered protocol family 1
[    0.683656] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.683725] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.683765] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.737834] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.792017] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c000                                                                                       0-0x000dffff]
[    0.845438] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    1.231666] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    1.339212] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    1.500763] PCI: CLS 0 bytes, default 64
[    1.500852] Unpacking initramfs...
[    1.950770] Freeing initrd memory: 17728K
[    1.952073] audit: initializing netlink subsys (disabled)
[    1.952101] audit: type=2000 audit(1563999447.002:1): initialized
[    1.953207] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.953278] zbud: loaded
[    1.956179] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 25                                                                                       0)
[    1.956262] io scheduler noop registered
[    1.956263] io scheduler deadline registered
[    1.956300] io scheduler cfq registered (default)
[    1.956563] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.956571] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.956749] GHES: HEST is not enabled!
[    1.956899] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.958157] Linux agpgart interface v0.103
[    1.958372] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.958373] AMD IOMMUv2 functionality not available on this system
[    1.958694] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64                                                                                        irq 1,12
[    1.959959] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.959971] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.960294] mousedev: PS/2 mouse device common for all mice
[    1.960789] input: AT Translated Set 2 keyboard as /devices/platform/i8042/ser                                                                                       io0/input/input0
[    1.961214] rtc_cmos 00:00: RTC can wake from S4
[    1.961921] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.962150] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet i                                                                                       rqs
[    1.962381] ledtrig-cpu: registered to indicate activity on CPUs
[    1.962732] NET: Registered protocol family 10
[    1.963291] mip6: Mobile IPv6
[    1.963293] NET: Registered protocol family 17
[    1.963297] mpls_gso: MPLS GSO support
[    1.963998] registered taskstats version 1
[    1.964046] zswap: loaded using pool lzo/zbud
[    1.964307] ima: No TPM chip found, activating TPM-bypass!
[    1.964310] ima: Allocated hash algorithm: sha256
[    1.965612] rtc_cmos 00:00: setting system clock to 2019-07-24 20:17:26 UTC (1                                                                                       563999446)
[    1.965656] PM: Hibernation image not present or could not be loaded.
[    1.967066] Freeing unused kernel memory: 1424K
[    1.967069] Write protecting the kernel read-only data: 12288k
[    1.968090] Freeing unused kernel memory: 1904K
[    1.972198] Freeing unused kernel memory: 1220K
[    1.980444] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.020490] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.020702] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.020725] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.109413] SCSI subsystem initialized
[    2.113169] ACPI: bus type USB registered
[    2.113209] usbcore: registered new interface driver usbfs
[    2.113224] usbcore: registered new interface driver hub
[    2.113314] FDC 0 is a S82078B
[    2.118272] usbcore: registered new device driver usb
[    2.119338] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.119962] uhci_hcd: USB Universal Host Controller Interface driver
[    2.122498] ehci-pci: EHCI PCI platform driver
[    2.128057] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio                                                                                       1/input/input3
[    2.128639] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio                                                                                       1/input/input2
[    2.129133] libata version 3.00 loaded.
[    2.308880] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision                                                                                        0
[    2.318437] virtio_net virtio2 ens18: renamed from eth0
[    2.322229] scsi host0: Virtio SCSI HBA
[    2.324568] scsi 0:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ:                                                                                        0 ANSI: 5
[    2.363871] uhci_hcd 0000:00:01.2: UHCI Host Controller
[    2.363908] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number                                                                                        1
[    2.363951] uhci_hcd 0000:00:01.2: detected 2 ports
[    2.364198] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000e040
[    2.364402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.364404] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.364406] usb usb1: Product: UHCI Host Controller
[    2.364407] usb usb1: Manufacturer: Linux 4.9.0-9-amd64 uhci_hcd
[    2.364409] usb usb1: SerialNumber: 0000:00:01.2
[    2.364653] hub 1-0:1.0: USB hub found
[    2.364664] hub 1-0:1.0: 2 ports detected
[    2.417383] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.417403] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number                                                                                        2
[    3.450980] tsc: Refined TSC clocksource calibration: 1497.580 MHz
[    3.450990] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159634818                                                                                       f7, max_idle_ns: 440795230006 ns
[    3.451038] ehci-pci 0000:00:1d.7: irq 11, io mem 0xfea53000
[    3.464424] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.464635] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.464638] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.464640] usb usb2: Product: EHCI Host Controller
[    3.464642] usb usb2: Manufacturer: Linux 4.9.0-9-amd64 ehci_hcd
[    3.464644] usb usb2: SerialNumber: 0000:00:1d.7
[    3.465246] hub 2-0:1.0: USB hub found
[    3.465265] hub 2-0:1.0: 6 ports detected
[    3.466094] ata_piix 0000:00:01.1: version 2.13
[    3.467060] scsi host1: ata_piix
[    3.467207] scsi host2: ata_piix
[    3.467276] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xe100 irq 14
[    3.467277] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xe108 irq 15
[    3.521468] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.521509] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number                                                                                        3
[    3.521552] uhci_hcd 0000:00:1d.0: detected 2 ports
[    3.521766] random: fast init done
[    3.521789] uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000e0a0
[    3.521948] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.521950] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.521952] usb usb3: Product: UHCI Host Controller
[    3.521954] usb usb3: Manufacturer: Linux 4.9.0-9-amd64 uhci_hcd
[    3.521955] usb usb3: SerialNumber: 0000:00:1d.0
[    3.522182] hub 3-0:1.0: USB hub found
[    3.522192] hub 3-0:1.0: 2 ports detected
[    3.574889] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.574910] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number                                                                                        4
[    3.574951] uhci_hcd 0000:00:1d.1: detected 2 ports
[    3.575050] uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000e0c0
[    3.575227] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.575230] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.575231] usb usb4: Product: UHCI Host Controller
[    3.575233] usb usb4: Manufacturer: Linux 4.9.0-9-amd64 uhci_hcd
[    3.575235] usb usb4: SerialNumber: 0000:00:1d.1
[    3.575608] hub 4-0:1.0: USB hub found
[    3.575619] hub 4-0:1.0: 2 ports detected
[    3.627739] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.627759] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number                                                                                        5
[    3.627800] uhci_hcd 0000:00:1d.2: detected 2 ports
[    3.627897] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000e0e0
[    3.628072] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.628074] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.628076] usb usb5: Product: UHCI Host Controller
[    3.628078] usb usb5: Manufacturer: Linux 4.9.0-9-amd64 uhci_hcd
[    3.628079] usb usb5: SerialNumber: 0000:00:1d.2
[    3.629418] ata2.01: NODEV after polling detection
[    3.629874] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    3.629965] hub 5-0:1.0: USB hub found
[    3.629978] hub 5-0:1.0: 2 ports detected
[    3.630666] ata2.00: configured for MWDMA2
[    3.633927] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ:                                                                                        0 ANSI: 5
[    3.657150] sd 0:0:0:0: [sda] 67108864 512-byte logical blocks: (34.4 GB/32.0                                                                                        GiB)
[    3.658061] sd 0:0:0:0: [sda] Write Protect is off
[    3.658064] sd 0:0:0:0: [sda] Mode Sense: 63 00 00 08
[    3.658182] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn                                                                                       't support DPO or FUA
[    3.660787]  sda: sda1 sda2 < sda5 >
[    3.661546] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    3.661550] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.662527] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    3.662623] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.676412] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    4.225311] usb 1-1: not running at top speed; connect to a high speed hub
[    4.254161] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[    4.254164] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[    4.254166] usb 1-1: Product: QEMU USB Tablet
[    4.254168] usb 1-1: Manufacturer: QEMU
[    4.254170] usb 1-1: SerialNumber: 42
[    4.263250] hidraw: raw HID events driver (C) Jiri Kosina
[    4.269244] usbcore: registered new interface driver usbhid
[    4.269247] usbhid: USB HID core driver
[    4.271333] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/us                                                                                       b1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4
[    4.271532] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mous                                                                                       e [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[    4.572902] PM: Starting manual resume from disk
[    4.572908] PM: Hibernation image partition 8:5 present
[    4.572909] PM: Looking for hibernation image.
[    4.573801] PM: Image not found (code -22)
[    4.573803] PM: Hibernation image not present or could not be loaded.
[    4.668503] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    5.018076] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (                                                                                       null)
[    5.115520] usb 3-1: New USB device found, idVendor=0451, idProduct=16a8
[    5.115523] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.115525] usb 3-1: Product: TI CC2531 USB CDC
[    5.115527] usb 3-1: Manufacturer: Texas Instruments
[    5.115529] usb 3-1: SerialNumber: __0X00124B0018E1AA6E
[    5.331468] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.351220] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELI                                                                                       NUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ                                                                                        +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.351330] systemd[1]: Detected virtualization qemu.
[    5.351345] systemd[1]: Detected architecture x86-64.
[    5.353013] systemd[1]: Set hostname to <iobroker>.
[   14.125582] systemd[1]: Listening on udev Kernel Socket.
[   14.125798] systemd[1]: Reached target Remote File Systems.
[   14.125925] systemd[1]: Listening on Syslog Socket.
[   14.126370] systemd[1]: Started Dispatch Password Requests to Console Director                                                                                       y Watch.
[   14.126546] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   14.126929] systemd[1]: Created slice User and Session Slice.
[   14.127158] systemd[1]: Listening on Journal Audit Socket.
[   14.127628] systemd[1]: Started Forward Password Requests to Wall Directory Wa                                                                                       tch.
[   14.127685] systemd[1]: Reached target Encrypted Volumes.
[   14.127714] systemd[1]: Reached target Paths.
[   14.220578] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   14.378289] systemd-journald[443]: Received request to flush runtime journal f                                                                                       rom PID 1
[   14.603892] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inpu                                                                                       t5
[   14.603899] ACPI: Power Button [PWRF]
[   14.693990] [drm] Initialized
[   14.724158] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   14.777517] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.777590] sr 2:0:0:0: Attached scsi generic sg1 type 5
[   14.814989] [drm] Found bochs VGA, ID 0xb0c0.
[   14.814992] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfea50000.
[   14.824297] [TTM] Zone  kernel: Available graphics memory: 1542250 kiB
[   14.824300] [TTM] Initializing pool allocator
[   14.824309] [TTM] Initializing DMA pool allocator
[   14.830634] fbcon: bochsdrmfb (fb0) is primary device
[   14.858679] cdc_acm 3-1:1.0: ttyACM0: USB ACM device
[   14.860952] usbcore: registered new interface driver cdc_acm
[   14.860953] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN                                                                                        adapters
[   14.880846] Console: switching to colour frame buffer device 128x48
[   14.883344] bochs-drm 0000:00:02.0: fb0: bochsdrmfb frame buffer device
[   14.906211] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on min                                                                                       or 0
[   14.907053] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.080013] Adding 3143676k swap on /dev/sda5.  Priority:-1 extents:1 across:3                                                                                       143676k FS
[   24.767636] random: crng init done
[   24.767640] random: 7 urandom warning(s) missed due to ratelimiting
 
Ich verstehe nicht warum das BT nicht mehr funktioniert, eine Zeit lang hat es funktioniert.
Aber hat öfters schon proxmox gemacht und diesmal gehts garnicht mehr.
Kannst du mir helfen das wieder zum laufen zu griegen?
 
Schränke bitte mal das Log auf nur Fehler ein. Geht so:
Code:
journalctl -b -p3

dmesg --level=err,warn
 
Code:
root@iobroker:~# journalctl -b -p3
-- No entries --
root@iobroker:~# dmesg --level=err,warn
[    0.482156] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.728547] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.835608] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    1.220252] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10                             
[    1.327695] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11                             
root@iobroker:~# dmesg --level=err,warn
[    0.482156] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.728547] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.835608] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    1.220252] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    1.327695] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
root@iobroker:~#
 
Ich hatte jetzt das Bluetooth wieder kurz durchgereicht und neugestartet.
Es war sofort wieder so langsam wie vorher und habe dann diese Befehle dmesg und journal ausgeführt.

Nach dem entfernen des BT war wieder alles flüssig gelaufen.
 
Sehr strange. Kann dir dabei nun leider nicht weiterhelfen. Event. findet sich hier wer der ähnliches erfahren hat. Über Logs kann ich jetzt zumindest nichts hilfreiches sagen. Möglicherweise schreibt Proxmox in sein Journallog was brauchbares in dem Moment wo du den Dongle durch reichst. Also wirklich während des anschließens die Logs in der VM und am Host live mit schauen, event. fällt dir hier was auf. Hättest du event. auch noch nen anderen Dongle zum Testen?
 
Im Log vom Host steht schon mehr

Code:
[97585.250233] Bluetooth: hci0 sending initial HCI reset command failed (-110)
[97587.682188] Bluetooth: hci0: command 0x0c03 tx timeout
[97595.746041] Bluetooth: hci0 sending initial HCI reset command failed (-110)
[97598.177976] Bluetooth: hci0: command 0x0c03 tx timeout
[97606.241937] Bluetooth: hci0 sending initial HCI reset command failed (-110)
[97608.673904] Bluetooth: hci0: command 0x0c03 tx timeout
[97616.737791] Bluetooth: hci0 sending initial HCI reset command failed (-110)
[97619.169772] Bluetooth: hci0: command 0x0c03 tx timeout
[97627.233660] Bluetooth: hci0 sending initial HCI reset command failed (-110)
[97629.665559] Bluetooth: hci0: command 0x0c03 tx timeout
[97637.729475] Bluetooth: hci0 sending initial HCI reset command failed (-110)
[97640.161490] Bluetooth: hci0: command 0x0c03 tx timeout
[97648.225410] Bluetooth: hci0 sending initial HCI reset command failed (-110)
[97650.657345] Bluetooth: hci0: command 0x0c03 tx timeout
[97658.721182] Bluetooth: hci0 sending initial HCI reset command failed (-110)
[97661.153135] Bluetooth: hci0: command 0x0c03 tx timeout
[97669.217104] Bluetooth: hci0 sending initial HCI reset command failed (-110)
[97671.648995] Bluetooth: hci0: command 0x0c03 tx timeout
root@pve:~#

Code:
root@pve:~# journalctl -b -p3
-- Logs begin at Thu 2019-07-25 15:52:32 CEST, end at Thu 2019-07-25 19:52:43 CE
Jul 25 15:52:32 pve kernel: Bluetooth: hci0: command 0x0c03 tx timeout
Jul 25 15:52:40 pve kernel: Bluetooth: hci0 sending initial HCI reset command fa
Jul 25 15:52:43 pve kernel: Bluetooth: hci0: command 0x0c03 tx timeout
Jul 25 15:52:51 pve kernel: Bluetooth: hci0 sending initial HCI reset command fa
Jul 25 15:52:53 pve kernel: Bluetooth: hci0: command 0x0c03 tx timeout
Jul 25 15:53:01 pve kernel: Bluetooth: hci0 sending initial HCI reset command fa
Jul 25 15:53:04 pve kernel: Bluetooth: hci0: command 0x0c03 tx timeout
Jul 25 15:53:12 pve kernel: Bluetooth: hci0 sending initial HCI reset command fa
Jul 25 15:53:14 pve kernel: Bluetooth: hci0: command 0x0c03 tx timeout
Jul 25 15:53:22 pve kernel: Bluetooth: hci0 sending initial HCI reset command fa
Jul 25 15:53:25 pve kernel: Bluetooth: hci0: command 0x0c03 tx timeout
Jul 25 15:53:33 pve kernel: Bluetooth: hci0 sending initial HCI reset command fa
Jul 25 15:53:35 pve kernel: Bluetooth: hci0: command 0x0c03 tx timeout
Jul 25 15:53:43 pve kernel: Bluetooth: hci0 sending initial HCI reset command fa
Jul 25 15:53:46 pve kernel: Bluetooth: hci0: command 0x0c03 tx timeout
Jul 25 15:53:54 pve kernel: Bluetooth: hci0 sending initial HCI reset command fa
Jul 25 15:53:56 pve kernel: Bluetooth: hci0: command 0x0c03 tx timeout
Jul 25 15:54:04 pve kernel: Bluetooth: hci0 sending initial HCI reset command fa
Jul 25 15:54:07 pve kernel: Bluetooth: hci0: command 0x0c03 tx timeout
Jul 25 15:54:15 pve kernel: Bluetooth: hci0 sending initial HCI reset command fa
Jul 25 15:54:17 pve kernel: Bluetooth: hci0: command 0x0c03 tx timeout
Jul 25 15:54:25 pve kernel: Bluetooth: hci0 sending initial HCI reset command fa
lines 1-23
 
Ja definitiv. Da scheint was nicht mit dem Adapter zu passen. Entweder Adpapter defekt, Problem mit dem PVE Server oder Kerneltreiberproblem. Schwer zu sagen. Teste mal nen anderen Dongle.

Hmm, hängt das Teil per USB3 oder USB2 drann? Wie auch immer, change das mal.
 
I
Code:
root@pve:~# dmesg --level=err,warn
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.048000]  #2 #3
[    0.125947] pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    0.126443] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    0.127017] pci 0000:03:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    1.384605] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.408965] tpm tpm0: A TPM error (378) occurred get tpm pcr allocation
[    1.481282] Couldn't get size: 0x800000000000000e
[    1.644849] i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A
[    1.644852] i801_smbus 0000:00:1f.1: PCI INT A: not connected
[    3.546833] spl: loading out-of-tree module taints kernel.
[    3.550546] znvpair: module license 'CDDL' taints kernel.
[    3.550548] Disabling lock debugging due to kernel taint
[    3.774972] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.803118] Error: Driver 'pcspkr' is already registered, aborting...
[    3.846185] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq failed with error -2
[    3.846193] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq(-2)
[    3.846219] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2
[    3.846221] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.8.bseq
[    4.063497] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    4.063528] thermal thermal_zone1: failed to read out thermal zone (-61)
[    4.695246] EDAC pnd2: Failed to register device with error -22.
[    4.817315] EDAC pnd2: Failed to register device with error -22.
[    8.012681] new mount options do not match the existing superblock, will be ignored

Falscher Treiber ?
Wie griege ich den richtigen
Es ist ein Intel® Wireless-AC 3168 + Bluetooth 4.2, habe jz schon alle iwlwifi.ucode in /lib/firmware gelöscht und gegen die 3168.ucode getauscht.
Immernoch gleiche Fehlermeldung
 
Hab ein wenig danach gesucht. Anscheinend geht es mit einem aktuelleren Kernel.
Code:
apt install linux-generic-hwe-16.04
Sollte das Problem lösen.
 
Geht irgendwie nicht ?

Code:
root@pve:~# apt install linux-generic-hwe-16.04
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package linux-generic-hwe-16.04
E: Couldn't find any package by glob 'linux-generic-hwe-16.04'
E: Couldn't find any package by regex 'linux-generic-hwe-16.04'
 
Geht irgendwie nicht ?

Code:
root@pve:~# apt install linux-generic-hwe-16.04
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package linux-generic-hwe-16.04
E: Couldn't find any package by glob 'linux-generic-hwe-16.04'
E: Couldn't find any package by regex 'linux-generic-hwe-16.04'
Ne, nicht in PVE, du hast den Stick doch in der Vm oder?
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!