vm is pfsense (freebsd 12.3)
trying to copy in nano, but also tried ee
copying from a mac on safari, but also tried chrome.
Once paste a big chunk, webconsole will hang, sometime disconnect. I have to go with xvnc or ssh to kill the process.
If I paste to proxmox host web console itself instead of a vm, that works...
I had freebsd configured as :
/etc/ttys:
# name getty type status comments
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console "/usr/libexec/getty Pc" xterm on secure
#
ttyv0 "/usr/libexec/getty Pc" xterm onifexists secure
# Virtual terminals
ttyv1 "/usr/libexec/getty Pc" xterm onifexists secure
ttyv2 "/usr/libexec/getty Pc" xterm onifexists secure
ttyv3 "/usr/libexec/getty Pc" xterm onifexists secure
ttyv4 "/usr/libexec/getty Pc" xterm onifexists secure
ttyv5 "/usr/libexec/getty Pc" xterm onifexists secure
ttyv6 "/usr/libexec/getty Pc" xterm onifexists secure
ttyv7 "/usr/libexec/getty Pc" xterm onifexists secure
ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyu0 "/usr/libexec/getty 3wire" vt100 off secure
ttyu1 "/usr/libexec/getty 3wire" vt100 off secure
ttyu2 "/usr/libexec/getty 3wire" vt100 off secure
ttyu3 "/usr/libexec/getty 3wire" vt100 off secure
# Dumb console
dcons "/usr/libexec/getty std.9600" vt100 off secure
xc0 "/usr/libexec/getty Pc" xterm onifexists secure
qm config 1001
bios: ovmf
boot: order=virtio0;net0
cores: 8
memory: 8192
meta: creation-qemu=6.1.1,ctime=1645039349
name: PfSense
net0: virtio=00:0a:f7:50:a0:83,bridge=vmbr1,tag=35
net1: virtio=06:5A:35:03:C6:5B,bridge=vmbr0
numa: 0
onboot: 1
ostype: l24
protection: 1
scsihw: virtio-scsi-pci
serial0: socket
smbios1: uuid=76400d77-d743-4f33-ab04-28ce65a96752
sockets: 2
startup: order=1,up=60
vga: std
virtio0: R1_1.6TB_SSD_EVO860:vm-1001-disk-0,size=32G
vmgenid: f058a37c-f729-40e3-8577-06b54fc60b31
