Connection to Frontend lost

cpzengel

cpzengel

Renowned Member
Nov 12, 2015
221
27
93
Aschaffenburg, Germany
zfs.rocks
Hi,

after moving my Proxmox ZFS Installation to another Machine, after a few hours the Frontend does not get any Feedback from the System.
So Machines asume to have only 512MB, no Statistics etc
I just moved the Disks from a HP Microserver G8 to a ML10 System
I am using the Test Repo

proxmox-ve: 4.0-22 (running kernel: 4.2.3-2-pve)
pve-manager: 4.0-64 (running version: 4.0-64/fc76ac6c)
pve-kernel-4.2.2-1-pve: 4.2.2-16
pve-kernel-4.2.3-2-pve: 4.2.3-22
lvm2: 2.02.116-pve2
corosync-pve: 2.3.5-2
libqb0: 0.17.2-1
pve-cluster: 4.0-29
qemu-server: 4.0-40
pve-firmware: 1.1-7
libpve-common-perl: 4.0-41
libpve-access-control: 4.0-10
libpve-storage-perl: 4.0-37
pve-libspice-server1: 0.12.5-2
vncterm: 1.2-1
pve-qemu-kvm: 2.4-17
pve-container: 1.0-32
pve-firewall: 2.0-14
pve-ha-manager: 1.0-14
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u1
lxc-pve: 1.1.5-5
lxcfs: 0.13-pve1
cgmanager: 0.39-pve1
criu: 1.6.0-1
zfsutils: 0.6.5-pve6~jessie
 
when yo say "does not respond" - does that mean https://<ip>:8006 does not load ?

netstat -a | grep 8006
Click to expand...

if that says - that proxmox is listening on those ports, it is most likely a cache error - and you should try and reset your browser cache.



when you say you are using "test repo" - do you mean
pve-no-subscription
or
pvetest
 
So here we are.
Its taking forever.
Correct view shows up after 30 sec
Its a Xeon E3 v3 with >3GHz and 32GB RAM, so no Reason for that

i am getting a lot of timeouts followed by response.
only thing i changed is the server hardware, not the disks
 
Last edited:
You must log in or register to reply here.
Top Bottom