Hi.
I'm building a two node proxmox setup for a scenario I call "primary/secondary", that means all the VMs (windows on kvm) are active on one node, the secondary node is there with the VMs always turned off, they should be turned on MANUALLY only if the first node has problems, the VM storage should be obviously in sync.
I can use a third proxmox installation just for quorum purpose, if needed.
Hardware I'm running on is low budget, 2xHDD but no hardware raid controller, usually I use ZFS raid1, 1xSSD I can put proxmox on, Intel core i7 processor, no ECC RAM.
I'm using proxmox usually in non-cluster configurations, so I don't really have a lot of knowledge about cluster best practise.
In this case what could be the best storage to use (I can't use SAN or other expensive technology), i read a lot about ceph, gluster and DRBD but I can't understand what could be better in my case.
Thanks
I'm building a two node proxmox setup for a scenario I call "primary/secondary", that means all the VMs (windows on kvm) are active on one node, the secondary node is there with the VMs always turned off, they should be turned on MANUALLY only if the first node has problems, the VM storage should be obviously in sync.
I can use a third proxmox installation just for quorum purpose, if needed.
Hardware I'm running on is low budget, 2xHDD but no hardware raid controller, usually I use ZFS raid1, 1xSSD I can put proxmox on, Intel core i7 processor, no ECC RAM.
I'm using proxmox usually in non-cluster configurations, so I don't really have a lot of knowledge about cluster best practise.
In this case what could be the best storage to use (I can't use SAN or other expensive technology), i read a lot about ceph, gluster and DRBD but I can't understand what could be better in my case.
Thanks