cluster 2-node problem (596)

W

whoim

Member
Jul 20, 2015
32
0
6
Hello!
Problem:
vDr8E8vCP8zym6.jpg

at second node in gui.
First node (i connected to this) normally.

Main node:
Code: 
cat cluster.conf
<?xml version="1.0"?>
<cluster name="cluster" config_version="9">

  <cman keyfile="/var/lib/pve-cluster/corosync.authkey" transport="udpu">
  </cman>

  <clusternodes>
  <clusternode name="z4907" votes="1" nodeid="1"/>
  <clusternode name="z5871" votes="1" nodeid="2"/></clusternodes>

</cluster>
Code: 
root@z4907:/var/log# pveversion -v
proxmox-ve-2.6.32: not correctly installed (running kernel: 2.6.32-39-pve)
pve-manager: 3.4-11 (running version: 3.4-11/6502936f)
pve-kernel-2.6.32-39-pve: 2.6.32-157
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.10-3
pve-cluster: 3.0-19
qemu-server: 3.4-6
pve-firmware: 1.1-5
libpve-common-perl: 3.0-24
libpve-access-control: 3.0-16
libpve-storage-perl: 3.0-34
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 2.2-20
ksm-control-daemon: 1.1-1
glusterfs-client: 3.5.2-1
Code: 
 pvecm status
Version: 6.2.0
Config Version: 9
Cluster Name: cluster
Cluster Id: 13364
Cluster Member: Yes
Cluster Generation: 48
Membership state: Cluster-Member
Nodes: 2
Expected votes: 2
Total votes: 2
Node votes: 1
Quorum: 2
Active subsystems: 5
Flags:
Ports Bound: 0
Node name: z4907
Node ID: 1
Multicast addresses: 255.255.255.255
Node addresses: 10.9.8.1

Second node:
Code: 
pveversion -v
proxmox-ve-2.6.32: 3.4-171 (running kernel: 2.6.32-44-pve)
pve-manager: 3.4-11 (running version: 3.4-11/6502936f)
pve-kernel-2.6.32-32-pve: 2.6.32-136
pve-kernel-2.6.32-44-pve: 2.6.32-171
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.10-3
pve-cluster: 3.0-19
qemu-server: 3.4-6
pve-firmware: 1.1-5
libpve-common-perl: 3.0-24
libpve-access-control: 3.0-16
libpve-storage-perl: 3.0-34
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 2.2-20
ksm-control-daemon: 1.1-1
glusterfs-client: 3.5.2-1

Code: 
pvecm status
Version: 6.2.0
Config Version: 9
Cluster Name: cluster
Cluster Id: 13364
Cluster Member: Yes
Cluster Generation: 48
Membership state: Cluster-Member
Nodes: 2
Expected votes: 2
Total votes: 2
Node votes: 1
Quorum: 2
Active subsystems: 5
Flags:
Ports Bound: 0
Node name: z5871
Node ID: 2
Multicast addresses: 255.255.255.255
Node addresses: 10.9.8.2

At all nodes hosts-file contains local ip-addressed


On main node i see: proxmox-ve-2.6.32: not correctly installed (running kernel: 2.6.32-39-pve)
Its this problem?
Thanks
 
Last edited:
I see: second node not reply to pveproxy port (8006). Port listen (netstat: 0.0.0.0:8006 pveproxy), but no get data.
access.log empty after adding node to cluster..
 
You must log in or register to reply here.
Top Bottom