Ceph Status Page Health and OSDs strangeness.

[devinacosta]

So i have successfully upgraded my Proxmox 5.0-29 environment running Luminous 12.1.1, the weird thing is that when I look at the health screen in the GUI, it displays the Performance, but the Health is blank and so is what it thinks the OSD's are (0 in, 0 out). However if i go to the Ceph->OSD menu everything looks good there. Also if i check "ceph health" and "ceph osd df" from the cli it works just fine.

See attached images. It shows the same on all 3 nodes of my cluster.

 

[devinacosta]

Ok I have figured it out it appears to be related to the "Chrome" Browser. If i use Firefox it works just fine. I presume something about Chrome is interfering with it functioning properly.

 

[joopmartens]

I'm running into the exact same issue on my pve5 test cluster though IE11, Firefox and Chrome behave the same. (Tried clearing cache and ctrl + f5 which most often solves GUI related issues)

pveversion -v
proxmox-ve: 5.0-15 (running kernel: 4.10.15-1-pve)
pve-manager: 5.0-23 (running version: 5.0-23/af4267bf)
pve-kernel-4.4.62-1-pve: 4.4.62-88
pve-kernel-4.10.15-1-pve: 4.10.15-15
pve-kernel-4.2.2-1-pve: 4.2.2-16
pve-kernel-4.4.67-1-pve: 4.4.67-92
libpve-http-server-perl: 2.0-5
lvm2: 2.02.168-pve2
corosync: 2.4.2-pve3
libqb0: 1.0.1-1
pve-cluster: 5.0-10
qemu-server: 5.0-12
pve-firmware: 2.0-2
libpve-common-perl: 5.0-16
libpve-guest-common-perl: 2.0-11
libpve-access-control: 5.0-5
libpve-storage-perl: 5.0-12
pve-libspice-server1: 0.12.8-3
vncterm: 1.5-2
pve-docs: 5.0-8
pve-qemu-kvm: 2.9.0-2
pve-container: 2.0-15
pve-firewall: 3.0-1
pve-ha-manager: 2.0-2
ksm-control-daemon: 1.2-2
glusterfs-client: 3.8.8-1
lxc-pve: 2.0.8-3
lxcfs: 2.0.7-pve2
criu: 2.11.1-1~bpo90
novnc-pve: 0.6-4
smartmontools: 6.5+svn4324-1
zfsutils-linux: 0.6.5.9-pve16~bpo90
ceph: 12.1.1-pve1

 

[dcsapak]

I'm running into the exact same issue on my pve5 test cluster though IE11, Firefox and Chrome behave the same. (Tried clearing cache and ctrl + f5 which most often solves GUI related issues)

when you are on the enterprise repository this is normal, there were some changes in ceph and the changes our gui are still only on no-subscription
also note that ceph luminous is still only a release candidate and not suited for production environments

 

[joopmartens]

Thanks for the feedback.
It's a test setup not used for production so that's fine. I shall just wait with further testing until the updates are released for the enterprise channel.