[SOLVED] CEPH Cluster

[ChrisJM]

Hello,

This is driving me insane.

I have done exactly in the CEPH video and documentation but it does not work.

When i create the OSD it makes it but doesnt show in the gui it just shows "default"

I also made the pool and it shows as 0 available

I think some documentation needs to be updated.

I am using version 5.2-1

 

[tom]

Works here. I think you should post more info about what you do and what is not working.

 

[ChrisJM]

When i add the disk via the OSD, it seems to add but does not show up in OSD section. it just shows default. it does this on all 3 nodes.

currently trying to do it manually.

 

[ChrisJM]

Just done it manually and still does not works

root@INETC1083:~# pveceph createosd /dev/sdc
create OSD on /dev/sdc (bluestore)
Caution: invalid backup GPT header, but valid main header; regenerating
backup header from main header.

****************************************************************************
Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk
verification and recovery are STRONGLY recommended.
****************************************************************************
GPT data structures destroyed! You may now partition the disk using fdisk or
other utilities.
Creating new GPT entries.
The operation has completed successfully.
Setting name!
partNum is 0
REALLY setting name!
The operation has completed successfully.
Setting name!
partNum is 1
REALLY setting name!
The operation has completed successfully.
The operation has completed successfully.
meta-data=/dev/sdc1              isize=2048   agcount=4, agsize=6400 blks
         =                       sectsz=512   attr=2, projid32bit=1
         =                       crc=1        finobt=1, sparse=0, rmapbt=0, reflink=0
data     =                       bsize=4096   blocks=25600, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
log      =internal log           bsize=4096   blocks=864, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0
The operation has completed successfully.

also getting this

root@INETC1083:~# ceph osd stat
0 osds: 0 up, 0 in

 

[ChrisJM]

I have now fixed it, i needed to zap and add via the command like

for example

ceph-disk zap /dev/sdb
pveceph createosd /dev/sdb

Then it should show in

ceph osd stat

Example

root@INETC1084:~# ceph osd stat
6 osds: 6 up, 6 in