CentOS Cloud Init - doesn’t work

[KAMALA]

Hello,
Everyone I am trying some automation with cloud init Images it works fine with Ubuntu and Debian.

However I could not managed to make it work for centos.

Could you please advise me on that or if you have any image already tested and worked would be nice to share it.

Thanks
Kamala

 

[bbgeek17]

Hi @KAMALA ,
Perhaps you could add more details, someone can advise you. For example:
What image/s you tried to use?
What type of cloudinit did you try?
What was the VM config?
What did not work?
What troubleshooting did you try?

Standard Cloud images (are they still available?) work just fine with both PVE built-in cloudinit and custom one.

Best

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[KAMALA]

Hi @KAMALA ,
Perhaps you could add more details, someone can advise you. For example:
What image/s you tried to use?
What type of cloudinit did you try?
What was the VM config?
What did not work?
What troubleshooting did you try?

Standard Cloud images (are they still available?) work just fine with both PVE built-in cloudinit and custom one.

Best

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

Hi @bbgeek17 ,

Here are VMs configs:
qm create 9000 --memory 2048 --core 2 --name CentOS-Cloud --net0 virtio,bridge=vmbr0
qm disk import 9000 CentOS.qcow2 HDD_Pool
qm set 9000 --scsihw virtio-scsi-pci --scsi0 HDD_Pool:vm-9000-disk-0
qm set 9000 --ide2 HDD_Pool:cloudinit
qm set 9000 --boot c --bootdisk scsi0
qm set 9000 --serial0 socket --vga serial0
qm template 9000

Teamplate creation went well with this Image that i used "CentOS-Stream-GenericCloud-x86_64-9-20241021.0.x86_64.qcow2"

- VM creation was successfull too

qm clone 9000 1003 --name CentOS01--full

- VM started




By default I keept IP config on DHCP



as you can see everything went well but I am not able to access or connect to the VM!


All the the comments are wellcomed as I said same steps worked for Ubuntu and Debian.

 

[bbgeek17]

I suspect you are missing the the boot trace.
Stop your VM, then run: qm start 901 && qm terminal 901

For me this image crashes with Kernel panic, which has nothing to do with cloudinit

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[KAMALA]

I suspect you are missing the the boot trace.
Stop your VM, then run: qm start 901 && qm terminal 901

For me this image crashes with Kernel panic, which has nothing to do with cloudinit

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

This is what I get from:

2J[ 0.000000] Linux version 5.14.0-522.el9.x86_64 (mockbuild@x86-05.stream.rdu2.redhat.com) (gcc (GCC) 11.5.0 20240719 (Red Hat 11.5.0-2), GNU ld version 2.35.2-54.el9) #1 SMP PREEMPT_DYNAMIC Sun Oct 20 13:04:34 UTC 2024

[ 0.000000] The list of certified hardware and cloud instances for Red Hat Enterprise Linux 9 can be viewed at the Red Hat Ecosystem Catalog, https://catalog.redhat.com.

[ 0.000000] Command line: BOOT_IMAGE=(hd0,gpt3)/vmlinuz-5.14.0-522.el9.x86_64 root=UUID=74c8a951-d254-4f9e-a83f-116a727217a6 ro console=ttyS0,115200n8 no_timer_check net.ifnames=0 crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable

[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable

[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] APIC: Static calls initialized

[ 0.000000] SMBIOS 2.8 present.

[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014

[ 0.000000] Hypervisor detected: KVM

[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00

[ 0.000000] kvm-clock: using sched offset of 5761803918 cycles

[ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns

[ 0.000005] tsc: Detected 3500.000 MHz processor

[ 0.000381] last_pfn = 0x7ffda max_arch_pfn = 0x400000000

[ 0.000407] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs

[ 0.000409] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT

[ 0.002530] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf]

[ 0.002744] RAMDISK: [mem 0x2eab6000-0x33552fff]

[ 0.002757] ACPI: Early table checksum verification disabled

[ 0.002762] ACPI: RSDP 0x00000000000F59A0 000014 (v00 BOCHS )

[ 0.002768] ACPI: RSDT 0x000000007FFE2507 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)

[ 0.002773] ACPI: FACP 0x000000007FFE22C9 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)

[ 0.002778] ACPI: DSDT 0x000000007FFDF040 003289 (v01 BOCHS BXPC 00000001 BXPC 00000001)

[ 0.002780] ACPI: FACS 0x000000007FFDF000 000040

[ 0.002783] ACPI: APIC 0x000000007FFE233D 0000A0 (v01 BOCHS BXPC 00000001 BXPC 00000001)

[ 0.002785] ACPI: SSDT 0x000000007FFE23DD 0000CA (v01 BOCHS VMGENID 00000001 BXPC 00000001)

[ 0.002788] ACPI: HPET 0x000000007FFE24A7 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)

[ 0.002790] ACPI: WAET 0x000000007FFE24DF 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)

[ 0.002792] ACPI: Reserving FACP table memory at [mem 0x7ffe22c9-0x7ffe233c]

[ 0.002793] ACPI: Reserving DSDT table memory at [mem 0x7ffdf040-0x7ffe22c8]

[ 0.002794] ACPI: Reserving FACS table memory at [mem 0x7ffdf000-0x7ffdf03f]

[ 0.002795] ACPI: Reserving APIC table memory at [mem 0x7ffe233d-0x7ffe23dc]

[ 0.002796] ACPI: Reserving SSDT table memory at [mem 0x7ffe23dd-0x7ffe24a6]

[ 0.002796] ACPI: Reserving HPET table memory at [mem 0x7ffe24a7-0x7ffe24de]

[ 0.002797] ACPI: Reserving WAET table memory at [mem 0x7ffe24df-0x7ffe2506]

[ 0.002993] No NUMA configuration found

[ 0.002993] Faking a node at [mem 0x0000000000000000-0x000000007ffd9fff]

[ 0.003004] NODE_DATA(0) allocated [mem 0x7ffaf000-0x7ffd9fff]

[ 0.003212] Reserving 192MB of memory at 1776MB for crashkernel (System RAM: 2047MB)

[ 0.003227] Zone ranges:

[ 0.003228] DMA [mem 0x0000000000001000-0x0000000000ffffff]

[ 0.003230] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]

[ 0.003231] Normal empty

[ 0.003232] Device empty

[ 0.003232] Movable zone start for each node

[ 0.003235] Early memory node ranges

[ 0.003235] node 0: [mem 0x0000000000001000-0x000000000009efff]

[ 0.003236] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]

[ 0.003238] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]

[ 0.003519] On node 0, zone DMA: 1 pages in unavailable ranges

[ 0.003545] On node 0, zone DMA: 97 pages in unavailable ranges

[ 0.004434] On node 0, zone DMA32: 38 pages in unavailable ranges

[ 0.004954] ACPI: PM-Timer IO Port: 0x608

[ 0.004964] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])

[ 0.004985] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23

[ 0.004987] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.004989] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)

[ 0.004990] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.004991] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)

[ 0.004992] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)

[ 0.004995] ACPI: Using ACPI (MADT) for SMP configuration information

[ 0.004995] ACPI: HPET id: 0x8086a201 base: 0xfed00000

[ 0.005002] CPU topo: Max. logical packages: 2

[ 0.005003] CPU topo: Max. logical dies: 2

[ 0.005003] CPU topo: Max. dies per package: 1

[ 0.005007] CPU topo: Max. threads per core: 1

[ 0.005008] CPU topo: Num. cores per package: 3

[ 0.005008] CPU topo: Num. threads per package: 3

[ 0.005008] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs

[ 0.005023] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()

[ 0.005040] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]

[ 0.005041] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

[ 0.005042] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]

[ 0.005043] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]

[ 0.005044] [mem 0x80000000-0xfeffbfff] available for PCI devices

[ 0.005045] Booting paravirtualized kernel on KVM

[ 0.005047] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns

[ 0.005049] Warning: Deprecated Hardware is detected: x86_64-v1:AuthenticAMD:Common KVM processor will not be maintained in a future major release and may be disabled

[ 0.009596] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1

[ 0.009930] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144

[ 0.009959] kvm-guest: PV spinlocks enabled

[ 0.009960] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear)

[ 0.009966] Kernel command line: BOOT_IMAGE=(hd0,gpt3)/vmlinuz-5.14.0-522.el9.x86_64 root=UUID=74c8a951-d254-4f9e-a83f-116a727217a6 ro console=ttyS0,115200n8 no_timer_check net.ifnames=0 crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M

[ 0.010047] Unknown kernel command line parameters "BOOT_IMAGE=(hd0,gpt3)/vmlinuz-5.14.0-522.el9.x86_64", will be passed to user space.

[ 0.010224] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)

[ 0.010323] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)

[ 0.010357] Fallback order for Node 0: 0

[ 0.010361] Built 1 zonelists, mobility grouping on. Total pages: 515802

[ 0.010362] Policy zone: DMA32

[ 0.010554] mem auto-init: stackff, heap allocff, heap freeff

[ 0.013965] Memory: 260860K/2096608K available (16384K kernel code, 5666K rwdata, 13072K rodata, 3996K init, 7680K bss, 366668K reserved, 0K cma-reserved)

[ 0.018307] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1

[ 0.018406] ftrace: allocating 48425 entries in 190 pages

[ 0.026617] ftrace: allocated 190 pages with 6 groups

[ 0.027249] Dynamic Preempt: voluntary

[ 0.027604] rcu: Preemptible hierarchical RCU implementation.

[ 0.027606] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6.

[ 0.027607] Trampoline variant of Tasks RCU enabled.

[ 0.027607] Rude variant of Tasks RCU enabled.

[ 0.027607] Tracing variant of Tasks RCU enabled.

[ 0.027608] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.

[ 0.027608] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6

[ 0.030933] NR_IRQS: 524544, nr_irqs: 472, preallocated irqs: 16

[ 0.031270] rcu: srcu_init: Setting srcu_struct sizes based on contention.

[ 0.031426] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)

[ 0.031547] Console: colour *CGA 80x25

[ 0.031583] printk: console [ttyS0] enabled

[ 0.110344] ACPI: Core revision 20230331

[ 0.111141] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns

[ 0.112139] APIC: Switch to symmetric I/O mode setup

[ 0.112813] x2apic enabled

[ 0.113318] APIC: Switched APIC routing to: physical x2apic

[ 0.114699] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.115349] tsc: Marking TSC unstable due to TSCs unsynchronized

[ 0.115944] Calibrating delay loop (skipped) preset value.. 7000.00 BogoMIPS (lpj=3500000)

[ 0.117063] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127

[ 0.117943] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0

[ 0.118945] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization

[ 0.119795] Spectre V2 : Mitigation: Retpolines

[ 0.119943] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[ 0.120943] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT

[ 0.121615] x86/fpu: x87 FPU will use FXSAVE

[ 0.135837] Freeing SMP alternatives memory: 40K

[ 0.135946] pid_max: default: 32768 minimum: 301

[ 0.137321] LSM: initializing lsm=lockdown,capability,yama,integrity,selinux,bpf

[ 0.138287] Yama: becoming mindful.

[ 0.138715] SELinux: Initializing.

[ 0.140087] LSM support for eBPF active

[ 0.140877] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)

[ 0.140945] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)

[ 0.245184] smpboot: CPU0: AMD Common KVM processor (family: 0xf, model: 0x6, stepping: 0x1)

[ 0.245956] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.

[ 0.246706] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.

[ 0.246960] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.

[ 0.247959] Performance Events: AMD PMU driver.

[ 0.248430] ... version: 0

[ 0.248943] ... bit width: 48

[ 0.249360] ... generic registers: 4

[ 0.249943] ... value mask: 0000ffffffffffff

[ 0.250503] ... max period: 00007fffffffffff

[ 0.250943] ... fixed-purpose events: 0

[ 0.251363] ... event mask: 000000000000000f

[ 0.252036] signal: max sigframe size: 1440

[ 0.252506] rcu: Hierarchical SRCU implementation.

[ 0.252507] rcu: Max phase no-delay instances is 400.

[ 0.254032] smp: Bringing up secondary CPUs ...

[ 0.254652] smpboot: x86: Booting SMP configuration:

[ 0.254656] .... node #0, CPUs: #1 #2 #3 #4 #5

[ 0.256996] smp: Brought up 1 node, 6 CPUs

[ 0.257002] smpboot: Total of 6 processors activated (42000.00 BogoMIPS)

[ 0.262202] node 0 deferred pages initialised in 2ms

[ 0.263142] devtmpfs: initialized

[ 0.263142] x86/mm: Memory block size: 128MB

[ 0.264011] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns

[ 0.264016] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)

[ 0.264130] pinctrl core: initialized pinctrl subsystem

[ 0.266897] NET: Registered PF_NETLINK/PF_ROUTE protocol family

[ 0.267015] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations

[ 0.267021] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations

[ 0.267024] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations

[ 0.267202] audit: initializing netlink subsys (disabled)

[ 0.267212] audit: type=2000 audit(1730396077.761:1): state=initialized audit_enabled=0 res=1

[ 0.267212] thermal_sys: Registered thermal governor 'fair_share'

[ 0.267212] thermal_sys: Registered thermal governor 'step_wise'

[ 0.267212] thermal_sys: Registered thermal governor 'user_space'

[ 0.267947] cpuidle: using governor menu

[ 0.269564] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[ 0.271013] PCI: Using configuration type 1 for base access

[ 0.273007] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.

[ 0.276021] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages

[ 0.276021] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page

[ 0.278070] cryptd: max_cpu_qlen set to 1000

[ 0.279124] ACPI: Added _OSI(Module Device)

[ 0.279124] ACPI: Added _OSI(Processor Device)

[ 0.279385] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.279943] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.282045] ACPI: 2 ACPI AML tables successfully acquired and loaded

[ 0.283331] ACPI: _OSC evaluation for CPUs failed, trying _PDC

[ 0.283331] ACPI: Interpreter enabled

[ 0.283331] ACPI: PM: (supports S0 S3 S4 S5)

[ 0.283331] ACPI: Using IOAPIC for interrupt routing

[ 0.283331] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.283331] PCI: Using E820 reservations for host bridge windows

[ 0.283415] ACPI: Enabled 3 GPEs in block 00 to 0F

[ 0.287209] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 0.287218] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI EDR HPX-Type3]

[ 0.287221] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]

[ 0.287228] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge

[ 0.287598] acpiphp: Slot [2] registered

[ 0.287611] acpiphp: Slot [3] registered

[ 0.287625] acpiphp: Slot [4] registered

[ 0.287669] acpiphp: Slot [5] registered

[ 0.287683] acpiphp: Slot [6] registered

[ 0.287719] acpiphp: Slot [7] registered

[ 0.287743] acpiphp: Slot [8] registered

[ 0.287784] acpiphp: Slot [9] registered

[ 0.287821] acpiphp: Slot [10] registered

[ 0.287879] acpiphp: Slot [11] registered

[ 0.287925] acpiphp: Slot [12] registered

[ 0.287952] acpiphp: Slot [13] registered

[ 0.288014] acpiphp: Slot [14] registered

[ 0.288030] acpiphp: Slot [15] registered

[ 0.288063] acpiphp: Slot [16] registered

[ 0.288077] acpiphp: Slot [17] registered

[ 0.288098] acpiphp: Slot [18] registered

[ 0.288141] acpiphp: Slot [19] registered

[ 0.288201] acpiphp: Slot [20] registered

[ 0.288277] acpiphp: Slot [21] registered

[ 0.288289] acpiphp: Slot [22] registered

[ 0.288300] acpiphp: Slot [23] registered

[ 0.288318] acpiphp: Slot [24] registered

[ 0.288329] acpiphp: Slot [25] registered

[ 0.288351] acpiphp: Slot [26] registered

[ 0.288376] acpiphp: Slot [27] registered

[ 0.288388] acpiphp: Slot [28] registered

 

[KAMALA]

I suspect you are missing the the boot trace.
Stop your VM, then run: qm start 901 && qm terminal 901

For me this image crashes with Kernel panic, which has nothing to do with cloudinit

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

[ 0.288413] acpiphp: Slot [29] registered

[ 0.288455] PCI host bridge to bus 0000:00

[ 0.288458] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]

[ 0.288460] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]

[ 0.288461] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[ 0.288462] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]

[ 0.288464] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]

[ 0.288465] pci_bus 0000:00: root bus resource [bus 00-ff]

[ 0.288542] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint

[ 0.290246] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint

[ 0.292524] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint

[ 0.294530] pci 0000:00:01.1: BAR 4 [io 0xe0c0-0xe0cf]

[ 0.295490] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk

[ 0.295492] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk

[ 0.295493] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk

[ 0.295495] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk

[ 0.295835] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 conventional PCI endpoint

[ 0.297943] pci 0000:00:01.2: BAR 4 [io 0xe080-0xe09f]

[ 0.299220] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint

[ 0.300635] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI

[ 0.300663] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB

[ 0.301417] pci 0000:00:03.0: [1af4:1002] type 00 class 0x00ff00 conventional PCI endpoint

[ 0.301944] pci 0000:00:03.0: BAR 0 [io 0xe000-0xe03f]

[ 0.305272] pci 0000:00:03.0: BAR 4 [mem 0xfea00000-0xfea03fff 64bit pref]

[ 0.307790] pci 0000:00:05.0: [1af4:1004] type 00 class 0x010000 conventional PCI endpoint

[ 0.308943] pci 0000:00:05.0: BAR 0 [io 0xe040-0xe07f]

[ 0.309943] pci 0000:00:05.0: BAR 1 [mem 0xfe440000-0xfe440fff]

[ 0.313586] pci 0000:00:05.0: BAR 4 [mem 0xfea04000-0xfea07fff 64bit pref]

[ 0.317580] pci 0000:00:12.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint

[ 0.318268] pci 0000:00:12.0: BAR 0 [io 0xe0a0-0xe0bf]

[ 0.318943] pci 0000:00:12.0: BAR 1 [mem 0xfe441000-0xfe441fff]

[ 0.320918] pci 0000:00:12.0: BAR 4 [mem 0xfea08000-0xfea0bfff 64bit pref]

[ 0.321279] pci 0000:00:12.0: ROM [mem 0xfe400000-0xfe43ffff pref]

[ 0.323140] pci 0000:00:1e.0: [1b36:0001] type 01 class 0x060400 conventional PCI bridge

[ 0.323944] pci 0000:00:1e.0: BAR 0 [mem 0xfe442000-0xfe4420ff 64bit]

[ 0.324531] pci 0000:00:1e.0: PCI bridge to [bus 01]

[ 0.324564] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]

[ 0.324583] pci 0000:00:1e.0: bridge window [mem 0xfe200000-0xfe3fffff]

[ 0.325144] pci 0000:00:1e.0: bridge window [mem 0xfe800000-0xfe9fffff 64bit pref]

[ 0.327457] pci 0000:00:1f.0: [1b36:0001] type 01 class 0x060400 conventional PCI bridge

[ 0.328252] pci 0000:00:1f.0: BAR 0 [mem 0xfe443000-0xfe4430ff 64bit]

[ 0.328746] pci 0000:00:1f.0: PCI bridge to [bus 02]

[ 0.328792] pci 0000:00:1f.0: bridge window [io 0xc000-0xcfff]

[ 0.328951] pci 0000:00:1f.0: bridge window [mem 0xfe000000-0xfe1fffff]

[ 0.329327] pci 0000:00:1f.0: bridge window [mem 0xfe600000-0xfe7fffff 64bit pref]

[ 0.331024] pci_bus 0000:01: extended config space not accessible

[ 0.331280] acpiphp: Slot [0] registered

[ 0.331307] acpiphp: Slot [1] registered

[ 0.331330] acpiphp: Slot [2-2] registered

[ 0.331359] acpiphp: Slot [3-2] registered

[ 0.331391] acpiphp: Slot [4-2] registered

[ 0.331412] acpiphp: Slot [5-2] registered

[ 0.331453] acpiphp: Slot [6-2] registered

[ 0.331478] acpiphp: Slot [7-2] registered

[ 0.331510] acpiphp: Slot [8-2] registered

[ 0.331537] acpiphp: Slot [9-2] registered

[ 0.331558] acpiphp: Slot [10-2] registered

[ 0.331590] acpiphp: Slot [11-2] registered

[ 0.331629] acpiphp: Slot [12-2] registered

[ 0.331658] acpiphp: Slot [13-2] registered

[ 0.331678] acpiphp: Slot [14-2] registered

[ 0.331705] acpiphp: Slot [15-2] registered

[ 0.331735] acpiphp: Slot [16-2] registered

[ 0.331763] acpiphp: Slot [17-2] registered

[ 0.331802] acpiphp: Slot [18-2] registered

[ 0.331829] acpiphp: Slot [19-2] registered

[ 0.331865] acpiphp: Slot [20-2] registered

[ 0.331893] acpiphp: Slot [21-2] registered

[ 0.331914] acpiphp: Slot [22-2] registered

[ 0.331951] acpiphp: Slot [23-2] registered

[ 0.331982] acpiphp: Slot [24-2] registered

[ 0.332019] acpiphp: Slot [25-2] registered

[ 0.332050] acpiphp: Slot [26-2] registered

[ 0.332078] acpiphp: Slot [27-2] registered

[ 0.332098] acpiphp: Slot [28-2] registered

[ 0.332120] acpiphp: Slot [29-2] registered

[ 0.332155] acpiphp: Slot [30] registered

[ 0.332184] acpiphp: Slot [31] registered

[ 0.332632] pci 0000:00:1e.0: PCI bridge to [bus 01]

[ 0.333164] pci_bus 0000:02: extended config space not accessible

[ 0.333412] acpiphp: Slot [0-2] registered

[ 0.333444] acpiphp: Slot [1-2] registered

[ 0.333473] acpiphp: Slot [2-3] registered

[ 0.333507] acpiphp: Slot [3-3] registered

[ 0.333531] acpiphp: Slot [4-3] registered

[ 0.333558] acpiphp: Slot [5-3] registered

[ 0.333581] acpiphp: Slot [6-3] registered

[ 0.333617] acpiphp: Slot [7-3] registered

[ 0.333644] acpiphp: Slot [8-3] registered

[ 0.333669] acpiphp: Slot [9-3] registered

[ 0.333692] acpiphp: Slot [10-3] registered

[ 0.333713] acpiphp: Slot [11-3] registered

[ 0.333752] acpiphp: Slot [12-3] registered

[ 0.333789] acpiphp: Slot [13-3] registered

[ 0.333819] acpiphp: Slot [14-3] registered

[ 0.333960] acpiphp: Slot [15-3] registered

[ 0.333989] acpiphp: Slot [16-3] registered

[ 0.334017] acpiphp: Slot [17-3] registered

[ 0.334039] acpiphp: Slot [18-3] registered

[ 0.334061] acpiphp: Slot [19-3] registered

[ 0.334082] acpiphp: Slot [20-3] registered

[ 0.334118] acpiphp: Slot [21-3] registered

[ 0.334151] acpiphp: Slot [22-3] registered

[ 0.334178] acpiphp: Slot [23-3] registered

[ 0.334199] acpiphp: Slot [24-3] registered

[ 0.334226] acpiphp: Slot [25-3] registered

[ 0.334259] acpiphp: Slot [26-3] registered

[ 0.334292] acpiphp: Slot [27-3] registered

[ 0.334316] acpiphp: Slot [28-3] registered

[ 0.334345] acpiphp: Slot [29-3] registered

[ 0.334372] acpiphp: Slot [30-2] registered

[ 0.334406] acpiphp: Slot [31-2] registered

[ 0.334823] pci 0000:00:1f.0: PCI bridge to [bus 02]

[ 0.336051] ACPI: PCI: Interrupt link LNKA configured for IRQ 10

[ 0.336166] ACPI: PCI: Interrupt link LNKB configured for IRQ 10

[ 0.336506] ACPI: PCI: Interrupt link LNKC configured for IRQ 11

[ 0.336621] ACPI: PCI: Interrupt link LNKD configured for IRQ 11

[ 0.336701] ACPI: PCI: Interrupt link LNKS configured for IRQ 9

[ 0.337304] iommu: Default domain type: Translated

[ 0.337304] iommu: DMA domain TLB invalidation policy: lazy mode

[ 0.337414] SCSI subsystem initialized

[ 0.337433] ACPI: bus type USB registered

[ 0.337449] usbcore: registered new interface driver usbfs

[ 0.337455] usbcore: registered new interface driver hub

[ 0.337460] usbcore: registered new device driver usb

[ 0.337482] pps_core: LinuxPPS API ver. 1 registered

[ 0.337483] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[ 0.337485] PTP clock support registered

[ 0.337977] EDAC MC: Ver: 3.0.0

[ 0.338237] NetLabel: Initializing

[ 0.338238] NetLabel: domain hash size = 128

[ 0.338239] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO

[ 0.338258] NetLabel: unlabeled traffic allowed by default

[ 0.338259] PCI: Using ACPI for IRQ routing

[ 0.339285] vgaarb: loaded

[ 0.339292] hpet: 3 channels of 0 reserved for per-cpu timers

[ 0.339292] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[ 0.339292] hpet0: 3 comparators, 64-bit 100.000000 MHz counter

[ 0.345083] clocksource: Switched to clocksource kvm-clock

[ 0.358450] VFS: Disk quotas dquot_6.6.0

[ 0.358488] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 0.358597] pnp: PnP ACPI init

[ 0.359067] pnp: PnP ACPI: found 5 devices

[ 0.368192] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[ 0.368526] NET: Registered PF_INET protocol family

[ 0.369113] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)

[ 0.369992] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)

[ 0.370003] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)

[ 0.370065] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)

[ 0.370086] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)

[ 0.370113] TCP: Hash tables configured (established 16384 bind 16384)

[ 0.370228] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)

[ 0.370264] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)

[ 0.370269] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)

[ 0.370480] NET: Registered PF_UNIX/PF_LOCAL protocol family

[ 0.370486] NET: Registered PF_XDP protocol family

[ 0.370498] pci 0000:00:1e.0: PCI bridge to [bus 01]

[ 0.370520] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]

[ 0.371103] pci 0000:00:1e.0: bridge window [mem 0xfe200000-0xfe3fffff]

[ 0.371424] pci 0000:00:1e.0: bridge window [mem 0xfe800000-0xfe9fffff 64bit pref]

[ 0.372080] pci 0000:00:1f.0: PCI bridge to [bus 02]

[ 0.372097] pci 0000:00:1f.0: bridge window [io 0xc000-0xcfff]

[ 0.372592] pci 0000:00:1f.0: bridge window [mem 0xfe000000-0xfe1fffff]

[ 0.372916] pci 0000:00:1f.0: bridge window [mem 0xfe600000-0xfe7fffff 64bit pref]

[ 0.373550] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]

[ 0.373553] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]

[ 0.373555] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]

[ 0.373557] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]

[ 0.373559] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]

[ 0.373560] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]

[ 0.373562] pci_bus 0000:01: resource 1 [mem 0xfe200000-0xfe3fffff]

[ 0.373563] pci_bus 0000:01: resource 2 [mem 0xfe800000-0xfe9fffff 64bit pref]

[ 0.373565] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]

[ 0.373566] pci_bus 0000:02: resource 1 [mem 0xfe000000-0xfe1fffff]

[ 0.373567] pci_bus 0000:02: resource 2 [mem 0xfe600000-0xfe7fffff 64bit pref]

 

[KAMALA]

I suspect you are missing the the boot trace.
Stop your VM, then run: qm start 901 && qm terminal 901

For me this image crashes with Kernel panic, which has nothing to do with cloudinit

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

[ 0.373747] pci 0000:00:01.0: PIIX3: Enabling Passive Release

[ 0.373759] pci 0000:00:00.0: Limiting direct PCI/PCI transfers

[ 0.388771] ACPI: \_SB_.LNKD: Enabled at IRQ 11

[ 0.401339] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x140 took 26896 usecs

[ 0.401461] PCI: CLS 0 bytes, default 64

[ 0.401486] ACPI: bus type thunderbolt registered

[ 0.401570] Trying to unpack rootfs image as initramfs...

[ 0.426488] Initialise system trusted keyrings

[ 0.426511] Key type blacklist registered

[ 0.426622] workingset: timestamp_bits=36 max_order=19 bucket_order=0

[ 0.426646] zbud: loaded

[ 0.429157] integrity: Platform Keyring initialized

[ 0.429170] integrity: Machine keyring initialized

[ 0.437695] NET: Registered PF_ALG protocol family

[ 0.437702] xor: measuring software checksum speed

[ 0.438132] prefetch64-sse : 23878 MB/sec

[ 0.438604] generic_sse : 21088 MB/sec

[ 0.438606] xor: using function: prefetch64-sse (23878 MB/sec)

[ 0.438607] Key type asymmetric registered

[ 0.438609] Asymmetric key parser 'x509' registered

[ 0.438610] Running certificate verification selftests

[ 0.440867] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'

[ 0.441314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)

[ 0.441425] io scheduler mq-deadline registered

[ 0.441427] io scheduler kyber registered

[ 0.441490] io scheduler bfq registered

[ 0.446576] atomic64_test: passed for x86-64 platform with CX8 and with SSE

[ 0.446989] shpchp 0000:00:1e.0: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0.SF0_)

[ 0.446997] shpchp 0000:00:1e.0: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0)

[ 0.447011] shpchp 0000:00:1e.0: Cannot get control of SHPC hotplug

[ 0.447112] shpchp 0000:00:1f.0: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0.SF8_)

[ 0.447118] shpchp 0000:00:1f.0: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0)

[ 0.447121] shpchp 0000:00:1f.0: Cannot get control of SHPC hotplug

[ 0.447128] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 0.447244] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0

[ 0.454776] ACPI: button: Power Button [PWRF]

[ 0.465598] ACPI: \_SB_.LNKC: Enabled at IRQ 10

[ 0.476715] ACPI: \_SB_.LNKA: Enabled at IRQ 10

[ 0.488016] ACPI: \_SB_.LNKB: Enabled at IRQ 11

[ 0.489238] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 0.489907] 00:00: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[ 0.490702] Non-volatile memory driver v1.3

[ 0.491545] rdac: device handler registered

[ 0.491640] hp_sw: device handler registered

[ 0.491643] emc: device handler registered

[ 0.491745] alua: device handler registered

[ 0.502399] uhci_hcd 0000:00:01.2: UHCI Host Controller

[ 0.502486] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1

[ 0.502541] uhci_hcd 0000:00:01.2: detected 2 ports

[ 0.502718] uhci_hcd 0000:00:01.2: irq 11, io port 0x0000e080

[ 0.502891] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.14

[ 0.502894] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.502896] usb usb1: Product: UHCI Host Controller

[ 0.502897] usb usb1: Manufacturer: Linux 5.14.0-522.el9.x86_64 uhci_hcd

[ 0.502899] usb usb1: SerialNumber: 0000:00:01.2

[ 0.503025] hub 1-0:1.0: USB hub found

[ 0.503035] hub 1-0:1.0: 2 ports detected

[ 0.503240] usbcore: registered new interface driver usbserial_generic

[ 0.503244] usbserial: USB Serial support registered for generic

[ 0.503280] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12

[ 0.504478] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.504484] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 0.504612] mousedev: PS/2 mouse device common for all mice

[ 0.504780] rtc_cmos 00:04: RTC can wake from S4

[ 0.506065] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

[ 0.506620] rtc_cmos 00:04: registered as rtc0

[ 0.506774] rtc_cmos 00:04: setting system clock to 2024-10-31T17:34:37 UTC (1730396077)

[ 0.506914] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs

[ 0.506990] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled

[ 0.507741] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input4

[ 0.508424] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3

[ 0.511372] hid: raw HID events driver (C) Jiri Kosina

[ 0.511407] usbcore: registered new interface driver usbhid

[ 0.511409] usbhid: USB HID core driver

[ 0.511425] drop_monitor: Initializing network drop monitor service

[ 0.522398] Initializing XFRM netlink socket

[ 0.522608] NET: Registered PF_INET6 protocol family

[ 0.797271] Freeing initrd memory: 76404K

[ 0.799421] Segment Routing with IPv6

[ 0.799464] NET: Registered PF_PACKET protocol family

[ 0.799544] mpls_gso: MPLS GSO support

[ 0.800989] IPI shorthand broadcast: enabled

[ 0.801022] sched_clock: Marking stable (718252840, 82662620)->(800738550, 176910)

[ 0.802138] registered taskstats version 1

[ 0.802902] Loading compiled-in X.509 certificates

[ 0.803619] Loaded X.509 cert 'The CentOS Project: CentOS Stream kernel signing key: 5be16e6833714d6763b280373eeb63dc7c088ef6'

[ 0.803899] Loaded X.509 cert 'Red Hat Enterprise Linux Driver Update Program (key 3): bf57f3e87362bc7229d9f465321773dfd1f77a80'

[ 0.804152] Loaded X.509 cert 'Red Hat Enterprise Linux kpatch signing key: 4d38fd864ebe18c5f0b72e3852e2014c3a676fc8'

[ 0.804284] Loaded X.509 cert 'RH-IMA-CA: Red Hat IMA CA: fb31825dd0e073685b264e3038963673f753959a'

[ 0.804297] Loaded X.509 cert 'Nvidia GPU OOT signing 001: 55e1cef88193e60419f0b0ec379c49f77545acf0'

[ 0.806330] page_owner is disabled

[ 0.806578] Key type .fscrypt registered

[ 0.806580] Key type fscrypt-provisioning registered

[ 0.806644] Key type big_key registered

[ 0.810515] Key type encrypted registered

[ 0.810530] ima: No TPM chip found, activating TPM-bypass!

[ 0.810535] Loading compiled-in module X.509 certificates

[ 0.810811] Loaded X.509 cert 'The CentOS Project: CentOS Stream kernel signing key: 5be16e6833714d6763b280373eeb63dc7c088ef6'

[ 0.810813] ima: Allocated hash algorithm: sha256

[ 0.810823] ima: No architecture policies found

[ 0.810832] evm: Initialising EVM extended attributes:

[ 0.810833] evm: security.selinux

[ 0.810834] evm: security.SMACK64 (disabled)

[ 0.810835] evm: security.SMACK64EXEC (disabled)

[ 0.810836] evm: security.SMACK64TRANSMUTE (disabled)

[ 0.810836] evm: security.SMACK64MMAP (disabled)

[ 0.810837] evm: security.apparmor (disabled)

[ 0.810837] evm: security.ima

[ 0.810838] evm: security.capability

[ 0.810839] evm: HMAC attrs: 0x1

[ 0.913226] clk: Disabling unused clocks

[ 0.915006] Freeing unused decrypted memory: 2028K

[ 0.915936] Freeing unused kernel image (initmem) memory: 3996K

[ 0.915946] Write protecting the kernel read-only data: 30720k

[ 0.917209] Freeing unused kernel image (rodata/data gap) memory: 1264K

[ 0.956018] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[ 0.956031] Run /init as init process

Fatal glibc error: CPU does not support x86-64-v[ 0.959953] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00

[ 0.960849] CPU: 4 PID: 1 Comm: init Not tainted 5.14.0-522.el9.x86_64 #1

[ 0.961535] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014

[ 0.962674] Call Trace:

[ 0.962942] <TASK>

[ 0.963163] dump_stack_lvl+0x34/0x48

[ 0.963539] panic+0x107/0x2bb

[ 0.963859] do_exit.cold+0x15/0x15

[ 0.964211] ? iterate_tty_write+0x19c/0x240

[ 0.964648] do_group_exit+0x2d/0x90

[ 0.965010] __x64_sys_exit_group+0x14/0x20

[ 0.965437] do_syscall_64+0x5f/0xf0

[ 0.965803] ? do_iter_readv_writev+0x1ae/0x220

[ 0.966270] ? do_iter_write+0x81/0x150

[ 0.966661] ? vfs_writev+0xcb/0x170

[ 0.967028] ? page_add_file_rmap+0xa2/0x1c0

[ 0.967467] ? do_set_pte+0xc9/0x280

[ 0.967830] ? exit_to_user_mode_prepare+0xef/0x100

[ 0.968320] ? syscall_exit_to_user_mode+0x19/0x40

[ 0.968800] ? do_syscall_64+0x6b/0xf0

[ 0.969180] ? do_read_fault+0x108/0x160

[ 0.969578] ? do_pte_missing+0x10d/0x190

[ 0.970043] ? __handle_mm_fault+0x2d7/0x660

[ 0.970482] ? syscall_exit_to_user_mode+0x19/0x40

[ 0.970970] ? do_syscall_64+0x6b/0xf0

[ 0.971348] ? handle_mm_fault+0x116/0x270

[ 0.971767] ? do_user_addr_fault+0x1c6/0x590

[ 0.972207] ? exc_page_fault+0x62/0x150

[ 0.972608] entry_SYSCALL_64_after_hwframe+0x78/0x80

[ 0.973123] RIP: 0033:0x7f3d382d70e5

[ 0.973494] Code: f7 d8 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa ba e7 00 00 00 eb 06 0f 1f 44 00 00 f4 89 d0 0f 05 <48> 3d 00 f0 ff ff 76 f3 f7 d8 89 05 db 30 01 00 eb e9 66 0f 1f 84

[ 0.975363] RSP: 002b:00007ffea8f49a48 EFLAGS: 00000246

[ 0.975894] RAX: ffffffffffffffda RBX: 00007f3d382d1c20 RCX: 00007f3d382d70e5

[ 0.976602] RDX: 00000000000000e7 RSI: 00007ffea8f49610 RDI: 000000000000007f

[ 0.977302] RBP: 00007ffea8f49bd0 R08: 00007ffea8f495b9 R09: 0000000000000000

[ 0.978021] R10: 00000000ffffffff R11: 0000000000000246 R12: 00007f3d382b3000

[ 0.978738] R13: 0000000000000025 R14: 0000000000000025 R15: 00007ffea8f49be0

[ 0.979460] </TASK>

[ 2.045766] Shutting down cpus with NMI

[ 2.046205] Kernel Offset: 0x10e00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)

[ 2.047218] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 ]---

 

[bbgeek17]

First, please use either CODE <> tags, or, for this amount of text, SPOILER option (under street light dots (3 dots) on the right side).

Second, there was no need to post the entirety of the log:

[ 2.047218] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 ]---

As mentioned earlier, the image/OS crashes with Kernel panic. There may be many reasons for that.
Its a "bleeding edge" release and could be broken, it may be in some way incompatible with Qemu9, it may not be liking particular CPU architecture, etc.
You are welcome to troubleshoot it more. If you do: try older image, try Rocky and/or Alma, wait a week and try next release, try to change CPU, reduce/increase memory, reduce/increase cores, change hardware, etc.

It's unlikely to be directly related to the topic of this forum, which is: "Proxmox VE: Installation and configuration"

Good luck

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[BobhWasatch]

Fatal glibc error: CPU does not support x86-64-v[ 0.959953] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00

This seems to be saying the image was built to use some x86 instruction set extensions that aren't enabled. If you are using the default "kvm64" CPU settings that might be the problem. Have you tried using "host" instead? If so, what CPU does the host have?

 

[KAMALA]

Fatal glibc error: CPU does not support x86-64-v[ 0.959953] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00

This seems to be saying the image was built to use some x86 instruction set extensions that aren't enabled. If you are using the default "kvm64" CPU settings that might be the problem. Have you tried using "host" instead? If so, what CPU does the host have?

what do you mean by? "Have you tried using "host" instead?"

This my CPU:
lscpu | grep "Model name:"
Model name: AMD Ryzen Threadripper 1920X 12-Core Processor

 

[bbgeek17]

what do you mean by? "Have you tried using "host" instead?"

https://pve.proxmox.com/wiki/Qemu/K...cific host cores.-,CPU Type,-QEMU can emulate

https://qemu-project.gitlab.io/qemu...#:~:text=-,Host passthrough,-This passes the

qm set 100 --cpu host

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox