[SOLVED] CentOS 6 OpenVZ to LXC migration issues

[jazzl0ver]

Hi all.

I'd like to share some issues I faced after migration CentOS 6 containers from OpenVZ (Proxmox VE 3.4) to LXC (Proxmox VE 4.1) using https://pve.proxmox.com/wiki/Convert_OpenVZ_to_LXC.

I had a CentOS 6 CT installed from a standard template. After migrating it to LXC there were two issues:
1. No more /dev/shm folder
2. The CT didn't react to shutdown command

To address the 1st issue one must add a line to /usr/share/lxc/config/centos.common.conf or create a file under /usr/share/lxc/config/common.conf.d on the Proxmox host. The magic line is:

lxc.mount.entry = none dev/shm tmpfs rw,nosuid,nodev,create=dir

Then make sure the CT's /etc/fstab no longer mounts /dev/shm

The 2nd issue happened due to missing files in the CT's file system which LXC requires. Here are they:

/etc/init.d/lxc-halt
/etc/rc.d/rc0.d/S00lxc-halt -> ../init.d/lxc-halt
/etc/rc.d/rc6.d/S00lxc-reboot -> ../init.d/lxc-halt
/etc/init/lxc-sysinit.conf
/etc/init/power-status-changed.conf

Also the following might be required in /etc/securetty:

# LXC (Linux Containers)
lxc/console
lxc/tty1
lxc/tty2
lxc/tty3
lxc/tty4
# For libvirt/Virtual Machine Monitor
pts/0

And don't forget to comment out /sbin/start_udev line in /etc/rc.sysinit

I was unable to quickly find those files on the net, so I put them here: https://github.com/jazzl0ver/lxc-centos
Or one can extract them from any publicly available LXC Centos templates.

 

[t.lamprecht]

Thanks for the notes, I linked this thread in the Convert OpenVZ to LXC wiki article: https://pve.proxmox.com/wiki/Convert_OpenVZ_to_LXC#CentOS_6_OpenVZ_to_LXC_migration_issues
Also this may be out of interest if your converted CentOS:
https://forum.proxmox.com/threads/l...to-converted-lxc-container.33221/#post-163326

But actually I may look if we can improve the restore code a little bit, we already have the functionality included to fix up securetty, etc. but we only call that when setting up a new container, because we do not want to modify an already configured container which a backed up one normally is.
But maybe we can execute a reduced fix up on restore.

 

[moxfan]

I am getting these 2 errors when running your lxc-setup script in PMX6:

ln: failed to create symbolic link '/etc/rc.d/rc0.d/S00lxc-halt': No such file or directory
ln: failed to create symbolic link '/etc/rc.d/rc6.d/S00lxc-reboot': No such file or directory

root@pmx5:~# ll /etc/rc.d
total 20
drwxr-xr-x  3 root root  4096 Jul 17 17:29 .
drwxr-xr-x 98 root root 12288 Oct 28 10:01 ..
drwxr-xr-x  2 root root  4096 Jul 17 17:29 init.d

Should I create the rc0.d and rc6.d directories under rc.d or are those two 500lxc files not very important?