Can't detect HP Smart Array B110i at RAID 1 and IBM DS (SAN) on SAS Ext Port

[chut]

Proxmox 2.0 Release date 05-04-2012 , setup screen boot: show disk error when use RAID 1 with HP Smart Array B110i

and i try to use only SAN
IBM System Storage DS3512 Dual Controller use SAS Port (6x 2TB SAS NL with RAID 10)
Server : HP ProLiant DL165G7
CPU : 2x AMD Opteron 6128
Memory : 4x 4GB ECC DDR3
HDD : Internal 2x WD Black 2TB RAID 1 with B110i
HP Modular Smart Array SC08e 2-ports Ext PCIe x8 SAS HBA

How to manual proxmox boot or promox command boot


I try with CentOS 6.2 x86_64 Installer it can detection SAN on SAS Port without error

Thank you
Ronachut

 

[tom]

seems that B110i is a fake raid controller? not supported. we only supports real hardware raidcontroller.

 

[chut]

seems that B110i is a fake raid controller? not supported. we only supports real hardware raidcontroller.

before i replace HP Smart Array SAS Ext Port i use HP P212 256MB Cache and Proxmox 2.0 can't detect too i don't know why but before i try to test with installer CentOS 6.0 x86_64 and Debian 6 AMD64 it can install on 4x 2TB WD Black without any error

Proxmox it can manual config partition or not ?

Thanks
Best Regards,
Ronachut