Can't access to web interface or SSH after fresh install

JeanL said:
Hi,

What is the complete IP configuration of your workstation ?

Have you tried with your workstation connected with ethernet ?

Best regards,
Click to expand...

Yeah, i tried but same issue.

Code: 
Windows IP Configuration


Ethernet Adapter Ethernet:

   Media Status. . . . . . . . . . . : Media Disconnected
   Connection-Specific DNS Suffix. . :

Wireless LAN Adapter Local Area Connection* 9:

   Media status. . . . . . . . . . . : media disconnected
   Connection-specific DNS suffix. . :

Wireless LAN adapter Local Area Connection* 10:

   Media status. . . . . . . . . . . : media disconnected
   Connection-specific DNS suffix:

Wi-Fi wireless LAN adapter:

   Connection-specific DNS suffix: home
   Link: local IPv6 address: fe80::c78f:a0a7:e05:3149%8
   IPv4 address. . . . . . . . . . . . . . : 192.168.1.20
   Subnet mask . . . . . . . . . . . . : 255.255.255.0
   Default gateway . . . . . . . . . . . : 192.168.1.1
 
But we can see that every adapter is disconnected but Wi-Fi.
Disconnect Wi-Fi and configure (wired) adapter.
 
Onslow said:
Yes.

No :-). Disconnect WiFi in the PC.
Start from the most simple setup. No WiFi, no router, no switch. Only:
PC ------- ethernet_cable -------- PVE
Click to expand...
Yep!

Assigned the Static addres to work station and connecting via eth.

That worked!

1761299193647.png
 
So the problem seems to be when the proxmox is connect via eth to the router and i try to access from my workstation.
 
Seems that there is something in the rest of you network that doesn't let the traffic. A router, a switch, a Wi-Fi, a firewall... I don't know the details of your setup so I don't know what is the reason :-(.

Try to start from the situation in which it works and gradually approach the setup which is your target. Observe when it has stopped to work and you will likely know which change causes the failure.
 
Onslow said:
Seems that there is something in the rest of you network that doesn't let the traffic. A router, a switch, a Wi-Fi, a firewall... I don't know the details of your setup so I don't know what is the reason :-(.

Try to start from the situation in which it works and gradually approach the setup which is your target. Observe when it has stopped to work and you will likely know which change causes the failure.
Click to expand...

Okay ),:

Thanks a lot for your time!! <3
 
You must log in or register to reply here.
Top Bottom