Can't access to web interface or SSH after fresh install

X

xjvrz

New Member
Oct 22, 2025
6
0
1
Hello everyone,
I m totally new to proxmox and i m having trouble triying to access to the web interface or connecting via SSH. (I think it should be some router or firewall issue).
Here you have the displays of some comands.


Also:

Ping google.com OK
Ping another computer in network OK
Ping pve from another computer OK


Thx in advance.
 

Attachments

  • cap.png
    cap.png
    978.1 KB · Views: 12
Welcome to the Forum!
We don't know what is the IP address of your workstation. It's difficult to help you without it.

BTW, it's better to send information in textual form, not photos.
As you have the physical access to the host, you can copy the output of the commands to a text file, then insert some USB stick, mount it and copy the file to the stick.
 
curl -k localhost:8006 should be curl -k https://localhost:8006 The HTTPS is rather important as HTTP does not work and port 8006 does not have a default protocol.
Maybe 192.168.1.49 is inside the DHCP-range of your router and, since Proxmox does not use DHCP (except for the installer), it blocks the traffic? This is not that uncommon.
 
Onslow said:
Welcome to the Forum!
We don't know what is the IP address of your workstation. It's difficult to help you without it.

BTW, it's better to send information in textual form, not photos.
As you have the physical access to the host, you can copy the output of the commands to a text file, then insert some USB stick, mount it and copy the file to the stick.
Click to expand...
Hey thanks a lot for the tip!
The IP of the proxmox server is 192.168.1.49 and the router is 192.168.1.1.
Here are the outputs:

Code: 
IP A ->
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute
       valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master vmbr0 state UP group default qlen 1000
    link/ether c4:34:6b:64:da:61 brd ff:ff:ff:ff:ff:ff
    altname enp0s25
    altname enxc4346b64da61
3: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether c4:34:6b:64:da:61 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.49/24 scope global vmbr0
       valid_lft forever preferred_lft forever
    inet6 fe80::c634:6bff:fe64:da61/64 scope link proto kernel_ll
       valid_lft forever preferred_lft forever

Code: 
cat /etc/network/interfaces

auto lo
iface lo inet loopback

iface eno1 inet manual

auto vmbr0
iface vmbr0 inet static
    address 192.168.1.49/24
    gateway 192.168.1.1
    bridge-ports eno1
    bridge-stp off
    bridge-fd 0


source /etc/network/interfaces.d/*

Code: 
cat /etc/hosts

127.0.0.1 localhost.localdomain localhost
192.168.1.49 pve.serverProx pve

# The following lines are desirable for IPv6 capable hosts

::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
 
leesteken said:
curl -k localhost:8006 should be curl -k https://localhost:8006 The HTTPS is rather important as HTTP does not work and port 8006 does not have a default protocol.
Maybe 192.168.1.49 is inside the DHCP-range of your router and, since Proxmox does not use DHCP (except for the installer), it blocks the traffic? This is not that uncommon.
Click to expand...
Hi!

Yeah the DHCP range of my router goes from 192.168.1.1 to 192.168.1.150.
¿Should i assign an IP out of the DHCP range (Like 192.168.1.151) to the server?
 
xjvrz said:
Yeah the DHCP range of my router goes from 192.168.1.1 to 192.168.1.150.
¿Should i assign an IP out of the DHCP range (Like 192.168.1.151) to the server?
Click to expand...
Yes of course! Otherwise you might get a duplicate IP address on your local network. Also change /etc/hosts accordingly.
 
Buuut, it is pingleable but still no access.
Click to expand...
You can also use nmap -p1-8006 <ip> to list open ports.

Is the issue that the web interface is not running at all (i.e. curl -v -k https://localhost:8006 fails on the server) or just that you can't reach it from your workstation?
 
Robert Obkircher said:
You can also use nmap -p1-8006 <ip> to list open ports.

Is the issue that the web interface is not running at all (i.e. curl -v -k https://localhost:8006 fails on the server) or just that you can't reach it from your workstation?
Click to expand...
Hi!

The issue is that i cant reach it from my workstation, i also tried proxmox mobile app to access.

Code: 
nmap -p1-8006 <ip>

Starting Nmap 7.95 ( https://nmap.org ) at 2025-10-23 17:01 CEST
Nmap scan report for pve.serverProx (192.168.1.151)
Host is up (0.0000030s latency).
Not shown: 8002 closed tcp ports (reset)
PORT     STATE SERVICE
22/tcp   open  ssh
111/tcp  open  rpcbind
3128/tcp open  squid-http
8006/tcp open  wpl-analytics

Nmap done: 1 IP address (1 host up) scanned in 0.14 seconds

Code: 
CURL ->

<!DOCTYPE html>
<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <meta http-equiv="X-UA-Compatible" content="IE=edge">
    <meta name="viewport" content="width=device-width, initial-scale=1, maximum-scale=1, user-scalable=no">
    <title>pve - Proxmox Virtual Environment</title>
    <link rel="icon" sizes="128x128" href="/pve2/images/logo-128.png" />
    <link rel="apple-touch-icon" sizes="128x128" href="/pve2/images/logo-128.png" />
    <link rel="stylesheet" type="text/css" href="/pve2/ext6/theme-crisp/resources/theme-crisp-all.css?ver=7.0.0" />
    <link rel="stylesheet" type="text/css" href="/pve2/ext6/crisp/resources/charts-all.css?ver=7.0.0" />
    <link rel="stylesheet" type="text/css" href="/pve2/fa/css/font-awesome.css" />
    <link rel="stylesheet" type="text/css" href="/pve2/font-logos/css/font-logos.css" />
    <link rel="stylesheet" type="text/css" href="/pve2/css/ext6-pve.css?ver=9.0.3" />
    <link rel="stylesheet" type="text/css" href="/pwt/css/ext6-pmx.css?ver=v5.0.4-t1754316706" />
    <link rel="stylesheet" type="text/css" media="(prefers-color-scheme: dark)" href="/pwt/themes/theme-proxmox-dark.css?ver=v5.0.4-t1754316706" />
    
    <script type='text/javascript'>
        function gettext(message) { return message; }
        function ngettext(singular, plural, count) { return count === 1 ? singular : plural; }
    </script>
    
    <script type="text/javascript" src="/pve2/ext6/ext-all.js?ver=7.0.0"></script>
    <script type="text/javascript" src="/pve2/ext6/charts.js?ver=7.0.0"></script>
    
    <script type="text/javascript" src="/pve2/js/u2f-api.js"></script>
    <script type="text/javascript" src="/qrcode.min.js"></script>
    <script type="text/javascript">
    Proxmox = {
        Setup: { auth_cookie_name: 'PVEAuthCookie' },
        defaultLang: 'en',
        NodeName: 'pve',
        UserName: '',
        CSRFPreventionToken: 'null',
        ConsentText: ''
    };
    </script>
    <script type="text/javascript" src="/proxmoxlib.js?ver=v5.0.4-t1754316706"></script>
    <script type="text/javascript" src="/pve2/js/pvemanagerlib.js?ver=9.0.3"></script>
    <script type="text/javascript" src="/pve2/ext6/locale/locale-en.js?ver=7.0.0"></script>

    <script type="text/javascript">
    if (typeof(PVE) === 'undefined') PVE = {};
    Ext.History.fieldid = 'x-history-field';
    Ext.onReady(function() { Ext.create('PVE.StdWorkspace');});
    </script>

  </head>
  <body>
    <!-- Fields required for history management -->
    <form id="history-form" class="x-hidden">
    <input type="hidden" id="x-history-field"/>
    </form>
  </body>
</html>
 
You must log in or register to reply here.
Top Bottom