Can't access the web interface.

  • Thread starter Thread starter actgold
  • Start date Start date
A

actgold

Guest
Hi there,

In need of some advice please. I have installed proxmox onto my home server using Hyper-V. Installed fine. At the installation I just gave it an IP on my routers DHCP range that wasn't in use. 192.168.30.121 default gateway and dns are of the router. Now once installed and logged into root I try access the web address from my other VM or from the actual server itself and I can't get to it. I also don't get a ping response from .121 although when I do ifconfig the ip is correct and if I do a ping to .121 from proxmox it responds. Am I missing something here? Also I take it proxmox does not have a GUI built in?

I work in IT but I'm a Windows tech and very much a novice as far as linux is concerned. I'm now trying to expand my area of expertise as I'd like to get into security and would like to build a test environment and proxmox was the suggested platform for building a lab. :-( stuck at the first hurdle.

Thanks for any help really appreciate your time
 
actgold said:
Hi there,

In need of some advice please. I have installed proxmox onto my home server using Hyper-V. Installed fine. At the installation I just gave it an IP on my routers DHCP range that wasn't in use. 192.168.30.121 default gateway and dns are of the router. Now once installed and logged into root I try access the web address from my other VM or from the actual server itself and I can't get to it. I also don't get a ping response from .121 although when I do ifconfig the ip is correct and if I do a ping to .121 from proxmox it responds. Am I missing something here? Also I take it proxmox does not have a GUI built in?

I work in IT but I'm a Windows tech and very much a novice as far as linux is concerned. I'm now trying to expand my area of expertise as I'd like to get into security and would like to build a test environment and proxmox was the suggested platform for building a lab. :-( stuck at the first hurdle.

Thanks for any help really appreciate your time
Click to expand...
Hi,
proxmox is made to run on bare metal and not as VM.

I guess your virtual NIC from hyper-v don't work in bridged mode - pve use the nic (like eth0) as device for the bridge vmbr0 - this bridge is also used to connect the VM-nics.

Try pve on a seperate computer ( if you have pve, you don't need hyper-v ;) )

Udo
 
You must log in or register to reply here.
Top Bottom